Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.

Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.

Depending on your PC you may receive one of the following errors:

• THREAD_STUCK_IN_DEVICE_DRIVER
• STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
• The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.

Few of the cause which can lead to Thread Stuck In Device Driver error are:

• Corrupt or old device drivers
• 새 하드웨어 설치 후 드라이버 충돌.
• Error 0xEA blue screen caused by a damaged video card.
• Old BIOS
• 나쁜 기억

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

그러니 시간을 낭비하지 말고 방법을 알아봅시다. Fix Thread Stuck In Device Driver Error in Windows 10 아래 나열된 문제 해결 가이드의 도움으로.

방법 1: 그래픽 카드 드라이버 업데이트

If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

방법 2: 하드웨어 가속 비활성화

1. Windows 키 + I를 눌러 엽니다. 설정 다음을 클릭하십시오 시스템. 

2. From the left-hand side menu, select 디스플레이. Now at the bottom of the Display window, click on the Advanced display settings.

3. 이제 가라. the Troubleshoot tab 클릭 설정 변경.

4. 를 끌어 Hardware Acceleration slider 없음으로

5. Click Ok then Apply and restart your PC.

6. If you don’t have the troubleshoot tab then right-click on the desktop and select NVIDIA 제어판 (Every graphic card has their own control panel).

7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.

8. Next, under select, a PhysX processor make sure the CPU is selected.

9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.

10. PC를 재부팅하고 가능한지 확인하세요. fix thread stuck in device driver error in Windows 10, if not, continue.

Method 3: Run SFC and DISM tool

1. Windows 키 + X를 누른 다음 명령 프롬프트(관리자).

2. 이제 cmd에 다음을 입력하고 Enter 키를 누릅니다.

Sfc / scannow

3. 위 프로세스가 완료될 때까지 기다린 후 완료되면 PC를 다시 시작합니다.

4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.

5. 다시 cmd를 열고 다음 명령을 입력한 후 Enter 키를 누르십시오.

Dism /Online /Cleanup-Image /CheckHealth Dism /Online /Cleanup-Image /ScanHealth Dism /Online /Cleanup-Image /RestoreHealth

6. DISM 명령을 실행하고 완료될 때까지 기다립니다.

7.  If the above command doesn’t work then try on the below:

Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows Dism /Online /Cleanup-Image /RestoreHealth /Source:c:testmountwindows /LimitAccess

참고 : C:RepairSourceWindows를 복구 소스 위치(Windows 설치 또는 복구 디스크)로 바꿉니다.

7. PC를 재부팅하여 변경 사항을 저장합니다.

Method 4: Perform Windows update

Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.

1. 프레스 윈도우 키 + 설정을 열고 다음을 클릭합니다. 업데이트 및 보안.

2. 왼쪽 메뉴에서 Windows Update를.

3. 이제 "업데이트 확인" 버튼을 눌러 사용 가능한 업데이트가 있는지 확인합니다.

4. 보류 중인 업데이트가 있으면 다음을 클릭하세요. 업데이트를 다운로드 및 설치합니다.

5. 업데이트를 다운로드한 후 설치하면 Windows가 최신 상태가 됩니다.

6. 업데이트가 설치된 후 PC를 재부팅하여 변경 사항을 저장합니다.

Method 5: Run Windows 10 BSOD Troubleshooter

If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).

1. Press Windows key + I to open Settings then click on ‘업데이트 및 보안'.

2. From the left pane, select ‘문제 해결'.

3. Scroll down to ‘다른 문제 찾기 및 수정' 섹션.

4. '를 클릭하십시오.블루 스크린'를 클릭하고 '문제 해결사 실행'.

Method 6: Give Graphics Card Access to the Application

1. Windows 키 + I를 눌러 설정을 연 다음 시스템.

2. 왼쪽 메뉴에서 다음을 선택하세요. 디스플레이 다음을 클릭하십시오 Graphics settings link 하단에.

3. Select the type of app, if you can’t find your app or game in the list then select the 클래식 앱 and then use the “검색"옵션.

4. Navigate to your application or game을 선택하고 클릭하십시오. 여십시오.

5. Once the app is added to the list, click on it then again click on 옵션을 클릭합니다.

6. 고르다 "고성능” and click on Save.

7. PC를 재부팅하여 변경 사항을 저장합니다.

방법 7: BIOS 업데이트(기본 입출력 시스템)

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.

Method 8: Reset Overclocking Settings

If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.

Method 9: Faulty GPU

Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.

방법 10: 전원 공급 장치 확인

A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

그게 당신이 성공적으로 Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.