Windows Cannot Connect to the Printer [SOLVED]
Fix Windows Cannot Connect to the Printer: If you are connected to a local network which shares a printer, it may be possible you may receive the error message “Windows cannot connect to the printer. Operation failed with error 0x000000XX” while trying to add the shared printer to your computer using Add Printer feature. This issue occurs because, after the printer is installed, Windows 10 or Windows 7 incorrectly looks for the Mscms.dll file in a subfolder different than the windowssystem32 subfolder.
Now there is alreadya Microsoft hotfix for this issue but it doesn’t seem to work for many users. So without wasting any time let’s see how to actually Fix Windows Cannot Connect to the Printer on Windows 10 with the below-listed troubleshooting guide.
참고 : 당신은 시도 할 수 있습니다 Microsoft hotfix first, just in case if this work for you then you will save a lot of time.
Windows Cannot Connect to the Printer [SOLVED]
혹시라도 문제가 생길 경우를 대비해 복원 지점을 만들어 두시기 바랍니다.
Method 1: Copy the mscms.dll
1.Navigate to the following folder: C: 윈도우 시스템32
2.Find the mscms.dll in the above directory and right-click then select copy.
3.Now paste the above file in the following location according to your PC architecture:
C:windowssystem32spooldriversx643 (For 64-bit)
C:windowssystem32spooldriversw32x863 (For 32-bit)
4.Reboot your PC to save changes and again try to connect to the remote printer again.
이것은 당신을 도울 것입니다 Fix Windows Cannot Connect to the Printer issue, 그렇지 않다면 계속하세요.
Method 2: Create A New Local Port
1. Windows 키 + X를 누른 다음 선택 제어판.
2.이제 클릭하세요 하드웨어 및 소리 다음을 클릭하십시오 장치 및 프린터.
3.Click 프린터 추가 상단 메뉴에서.
4.If you don’t see you printer listed click the link which says “The printer that I want isn’t listed."
5.From the next screen select “수동 설정으로 로컬 프린터 또는 네트워크 프린터 추가"를 클릭하고 다음을 클릭합니다.
6.Select 새 포트 만들기 and then from type of port drop-down select 로컬 포트 다음을 클릭하십시오.
7.Type the printer’s address in Printers port name field in the following format:
IP address or the Computer NamePrinters Name
예를 들어 192.168.1.120HP LaserJet Pro M1136
8.Now click OK and then click Next.
9.Follow on-screen instructions to finish the process.
Method 3: Restart Print Spooler Service
1. Windows 키 + R을 누른 다음 입력 services.msc를 Enter를 누르십시오.
2.찾기 인쇄 스풀러 서비스 in the list and double-click on it.
3. 시작 유형이 다음으로 설정되어 있는지 확인하세요. Automatic and the service is running, then click on Stop and then again click on start in order to restart the service.
4. 적용을 클릭한 다음 확인을 클릭합니다.
5.After that, again try to add the printer and see if the you’re able to Fix Windows Cannot Connect to the Printer issue.
Method 4: Delete Incompatible Printer Drivers
1.Press Windows key + R then type Printmanagement.msc Enter를 누르십시오.
2.From the left pane, click All Drivers.
3.Now in the right window pane, right-click on the printer driver and click Delete.
4.If you see more than one printer driver names, repeat the above steps.
5.Again try to add the printer and install its drivers. See if you are able to Fix Windows Cannot Connect to the Printer issue, 그렇지 않은 경우 다음 방법을 계속 진행하십시오.
방법 5: 레지스트리 수정
1.First, you need to stop Printer Spooler service (Refer to method 3).
2. Windows 키 + R을 누른 다음 입력 regedit를 Enter 키를 눌러 레지스트리 편집기를 엽니다.
3. 다음 레지스트리 키로 이동합니다.
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionPrintProvidersClient Side Rendering Print Provider
4.이제 마우스 오른쪽 버튼을 클릭하세요. Client Side Rendering Print Provider 선택 삭제합니다.
5.Now again start Printer Spooler service and reboot your PC to save changes.
당신을 위해 추천 된:
그게 당신이 성공적으로 Fix Windows Cannot Connect to the Printer issue 하지만 이 기사와 관련하여 여전히 질문이 있는 경우 댓글 섹션에서 자유롭게 질문하세요.