Androidде WPS аркылуу WiFi тармагына кантип туташса болот
If you are preferring to connect to the wireless network more easily, then it is suggested to connect to Android WPS. It is said that this feature is not available in WPS Android 9 version. This article will help you connect to the WPS push button Android.
Androidде WPS аркылуу WiFi тармагына кантип туташса болот
Wi-Fi Protected Setup, abbreviated as WPS, makes a connection between the router and the device faster and easier. It was introduced in 2006 by Cisco. It is a network security standard that works for wireless networks encrypted with a password. But these passwords must be encrypted with WPA Personal or WPA2 Personal security protocols. This feature enables the router owner to restrict strangers from using their wireless network. People prefer this feature because this does not include entering long passwords while connecting. There are four different modes as
- Push button,
- БАТАРЕЯ,
- USB,
- and near-field communication modes
The last two are out-of-band modes, but the first two are mostly used.
Кара Ошондой эле:
Android 6.0 боюнча USB орнотууларды кантип өзгөртүү керек
Androidде GIFтерди кантип жөнөтсө болот
Android телефонундагы колдонмолорду кантип жашырса болот
Androidде кезекте турган жүктөөнү кантип оңдоого болот
WhatsAppтын Androidдеги байланыштарды синхрондобогондугун оңдоонун 7 жолу
Pros of WPS
Following are the pros of using WPS.
- Болот жазуусу configure the network name and security key.
- бул not required to know the security key or password for the wireless network.
- The security key is generated by WPS, making it more secure.
- The security key is encrypted by Extensible Authentication Protocol.
Cons of WPS
Below are a few cons of using WPS.
- Not all devices or routers support WPS, that is, the device with WPS Android 9 and more.
- бир cannot connect using WPS if the device is not verified with WPS certification.
- It does not support direct connections, whereas the connections are made through AP.
Ошондой эле окуу: What is WPS and How Does it Work?
Steps to Connect to A Wi-Fi Network Using WPS
To connect the WPS push button Android, you need to ensure that:
- The router and your mobile version support the WPS feature.
- The WPS button on your router is enabled.
Follow the below steps to connect the WPS to your device.
Эскертүү: Since smartphones don’t have the same settings options, and they vary from manufacturer to manufacturer. Hence, ensure the correct settings before changing any. The screenshots used in this article are taken from OnePlus Nord.
1. Орнотуулар Сиздин аппараттагы колдонмо.
2. Бул жерден басыңыз Wi-Fi & Тармак тандоо.
3. Андан кийин, басыңыз WiFi тандоо.
4. Азыр таптап коюңуз Wi-Fi параметрлери астында Wi-Fi жөндөөлөрү категория.
5. Акырында, баскычын басыңыз WPS Push баскычы.
Эскертүү 1: If there is no WPS button on your Android device, then tap WPS Pin киргизүү to connect using an eight-digit pin in the router control panel.
Эскертүү 2: If your device and router support WPS and you can’t connect to the WPS, then try moving closer to the router.
Көп берилүүчү суроолор (FAQ)
Q1. Does WPS reduce the speed of the network?
Лет. Жок, but it may slow down the speed of the network occasionally.
Q2. Does WPS to be connected every time we use Wi-Fi?
Лет. Жок, connecting to the router using WPS is a one-time process. You get connected to the network whenever you turn it on.
Q3. Is it safe to connect using WPS?
Лет. Though the method is faster and easier, it is not secure. A hacker can find gain access to all your connected devices. So, it is recommended to disable WPS.
сунушталат:
We hope that this guide will help you to connect your mobile to Android-WPS. Drop your queries and suggestions in the comment section below, if any.