Thread Stuck In Device Driver Error in Windows 10 [SOLVED]
Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.
Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.
Depending on your PC you may receive one of the following errors:
- THREAD_STUCK_IN_DEVICE_DRIVER
- STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
- The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.
Few of the cause which can lead to Thread Stuck In Device Driver error are:
- Corrupt or old device drivers
- Жаңы жабдыкты орноткондон кийин айдоочу чатагы.
- Error 0xEA blue screen caused by a damaged video card.
- Old BIOS
- Bad Memory
Thread Stuck In Device Driver Error in Windows 10 [SOLVED]
Ошентип, убакытты текке кетирбей, кантип көрөбүз Fix Thread Stuck In Device Driver Error in Windows 10 төмөндө келтирилген көйгөйлөрдү чечүү боюнча колдонмонун жардамы менен.
Метод 1: Графикалык карта драйверлерин жаңыртуу
If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.
Метод 2: Аппараттык ылдамдатууну өчүрүү
1. Ачуу үчүн Windows баскычын + I басыңыз Орнотуулар андан кийин чыкылдатыңыз Тутум.
2. From the left-hand side menu, select дисплей. Now at the bottom of the Display window, click on the Advanced display settings.
3. Эми барыңыз the Troubleshoot tab жана чыкылдатуу Change Орнотуулар.
4. сүйрөңүз Hardware Acceleration slider Эч кимге
5. Click Ok then Apply and restart your PC.
6. If you don’t have the troubleshoot tab then right-click on the desktop and select NVIDIA Control Panel (Every graphic card has their own control panel).
7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.
8. Next, under select, a PhysX processor make sure the CPU is selected.
9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.
10. Компьютериңизди өчүрүп күйгүзүңүз жана мүмкүнчүлүгүңүз бар-жогун көрүңүз fix thread stuck in device driver error in Windows 10, if not, continue.
Method 3: Run SFC and DISM tool
1. Windows Key + X баскычтарын басып, анан басыңыз Command Prompt (Admin).
2. Эми cmdге төмөнкүнү териңиз жана enter баскычын басыңыз:
Башталды / scannow
3. Жогорудагы процесс бүткүчө күтө туруңуз жана бүткөндөн кийин компьютериңизди өчүрүп күйгүзүңүз.
4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.
5. Кайрадан cmd ачып, төмөнкү буйрукту териңиз жана ар биринин артынан enter баскычын басыңыз:
Dism /Online /Cleanup-Image /CheckHealth Dism /Online /Cleanup-Image /ScanHealth Dism /Online /Cleanup-Image /RestoreHealth
6. DISM буйругун иштетиңиз жана анын бүтүшүн күтүңүз.
7. If the above command doesn’t work then try on the below:
Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Булак:c:testmountwindows Dism /Online /Cleanup-Image /RestoreHealth /Булак:c:testmountwindows /LimitAccess
Эскертүү: C:RepairSourceWindows'ту оңдоо булагыңыздын жайгашкан жери менен алмаштырыңыз (Windows орнотуу же калыбына келтирүү диски).
7. Өзгөртүүлөрдү сактоо үчүн компьютериңизди өчүрүп күйгүзүңүз.
Method 4: Perform Windows update
Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.
1. басма сөз Windows ачкычы + Мен Орнотууларды ачып, анан басыңыз Жаңыртуу жана Коопсуздук.
2. Сол жактагы менюну басыңыз Windows Update.
3. Эми “билүү үчүн текшерүү” баскычын басып, жеткиликтүү жаңыртууларды текшериңиз.
4. Эгерде кандайдыр бир жаңыртуулар күтүлсө, анда чыкылдатыңыз Жаңыртууларды жүктөп алыңыз жана орнотуңуз.
5. Жаңыртуулар жүктөлүп алынгандан кийин, аларды орнотуңуз жана сиздин Windows жаңыртылган болот.
6. Жаңыртуулар орнотулгандан кийин өзгөртүүлөрдү сактоо үчүн компьютериңизди өчүрүп күйгүзүңүз.
Method 5: Run Windows 10 BSOD Troubleshooter
If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).
1. Press Windows key + I to open Settings then click on ‘Жаңыртуу жана Коопсуздук'.
2. From the left pane, select ‘жоюу'.
3. 'га чейин ылдый сыдырыңызБашка көйгөйлөрдү таап, оңдогула' бөлүмдөрү.
4. 'чыкылдатыңызКөк экран' жана чыкылдатыңыз 'чечкичти иштеткенде'.
Method 6: Give Graphics Card Access to the Application
1. Орнотууларды ачуу үчүн Windows баскычын + I басыңыз, андан кийин басыңыз Тутум.
2. Сол жактагы менюдан тандаңыз дисплей андан кийин чыкылдатыңыз Graphics settings link түбүндө.
3. Select the type of app, if you can’t find your app or game in the list then select the Классикалык колдонмо and then use the “карап чыгуу"Тандоо.
4. Navigate to your application or game, аны тандап, чыкылдатыңыз Open.
5. Once the app is added to the list, click on it then again click on Жолдор.
6. тандоо "жогорку” and click on Save.
7. Өзгөртүүлөрдү сактоо үчүн компьютериңизди өчүрүп күйгүзүңүз.
Method 7: Update BIOS (Basic Input/Output System)
Эскертүү
Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, expert supervision is recommended.
BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.
Method 8: Reset Overclocking Settings
If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.
Method 9: Faulty GPU
Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.
Метод 10: Электр менен камсыздоону текшерүү
A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.
If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.
Бул сиз ийгиликтүү болдуңуз Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.