Fix Windows 10 install Fails With Error C1900101-4000D
Fix Windows 10 install Fails With Error C1900101-4000D: If you’re trying to upgrade to Windows 10 but the install fails with error code C1900101-4000D then don’t worry as it occurs because the Windows installer cannot access important files required for installation. Sometimes this error is also caused because of a conflict during installation but you can’t be sure as there is no error message accompanying this error.
0xC1900101-0x4000D
The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation
While there is no definite fix for this issue but users seem to be recommending a clean installation of Windows 10 which should only be used as a last resort. So without wasting any time let’s see How to Fix Windows 10 install Fails With Error C1900101-4000D with the help of below-listed troubleshooting guide.
Fix Windows 10 install Fails With Error C1900101-4000D
ກໍາຫນົດເບື້ອງຕົ້ນ
a)Make sure to Update all drivers, including graphic, sound, BIOS, USB devices, printers, etc before the installing Windows 10.
b)Remove all external USB devices such as pen drive, external hard disk, USB keyboard & mouse, USB printer and all peripherals.
c)Use an ethernet cable instead of WiFi and disable WiFi until the update is complete.
Method 1: Temporarily Disable Antivirus and Firewall before attempting Upgrade
1.ຄລິກຂວາໃສ່ປຸ່ມ ໄອຄອນໂປຣແກຣມຕ້ານໄວຣັສ ຈາກຖາດລະບົບແລະເລືອກ ປິດການໃຊ້ວຽກ
2.Next, ເລືອກເຟຣມທີ່ໃຊ້ເວລາສໍາລັບການທີ່ Antivirus ຈະຍັງຄົງຖືກປິດໃຊ້ງານ.
ຫມາຍເຫດ: ເລືອກເວລາໜ້ອຍທີ່ສຸດເທົ່າທີ່ເປັນໄປໄດ້ ຕົວຢ່າງ 15 ນາທີ ຫຼື 30 ນາທີ.
3.Once done, again try to upgrade your PC and check if the error resolves or not.
4.Type control in the Windows Search then click on ກະດານການຄວບຄຸມ ຈາກຜົນການຄົ້ນຫາ.
5.ຕໍ່ໄປ, ໃຫ້ຄລິກໃສ່ ລະບົບແລະຄວາມປອດໄພ.
6.ຫຼັງຈາກນັ້ນ, ໃຫ້ຄລິກໃສ່ Windows Firewall.
7.Now ຈາກ pane ປ່ອງຢ້ຽມຊ້າຍໃຫ້ຄລິກໃສ່ ເປີດ ຫຼືປິດ Windows Firewall.
8.ເລືອກ ປິດ Windows Firewall ແລະ restart PC ຂອງທ່ານ. Again try to upgrade your PC and see if you’re able to Fix Windows 10 install Fails With Error C1900101-4000D.
ຖ້າວິທີການຂ້າງເທິງນີ້ບໍ່ໄດ້ຜົນ, ໃຫ້ແນ່ໃຈວ່າເຮັດຕາມຂັ້ນຕອນດຽວກັນເພື່ອເປີດ Firewall ຂອງທ່ານອີກເທື່ອຫນຶ່ງ.
Method 2: Remove any hyphens from your computer or machine name
1.ກົດ Windows Key + R ແລ້ວພິມ sysdmcpl ແລະກົດ Enter ເພື່ອເປີດ ຄຸນສົມບັດຂອງລະບົບ.
2.Make sure you’re under ແຖບຊື່ຄອມພິວເຕີ ຈາກນັ້ນກົດເຂົ້າ ການປ່ຽນແປງ ປຸ່ມຢູ່ທາງລຸ່ມ.
3.Make sure your machine name is simple no periods or hyphens or dashes.
4.Click OK then Apply followed by OK.
5.Reboot PC ຂອງທ່ານເພື່ອບັນທຶກການປ່ຽນແປງ.
ວິທີທີ 3: ໃຫ້ແນ່ໃຈວ່າ Windows ອັບເດດແລ້ວ
1.ກົດ Windows Key + I ຈາກນັ້ນເລືອກ ປັບປຸງແລະຄວາມປອດໄພ.
2.ຕໍ່ໄປ, ອີກເທື່ອຫນຶ່ງຄລິກ ກວດສອບການປັບປຸງ ແລະໃຫ້ແນ່ໃຈວ່າຈະຕິດຕັ້ງການອັບເດດທີ່ຍັງຄ້າງຢູ່.
3.ຫຼັງຈາກການປັບປຸງໄດ້ຖືກຕິດຕັ້ງ reboot PC ຂອງທ່ານແລະເບິ່ງວ່າທ່ານສາມາດ Fix Windows 10 install Fails With Error C1900101-4000D.
ວິທີທີ່ 4: ດໍາເນີນການ Clean Boot
This would make sure that if any 3rd party application is conflicting with Windows update then you will be able to successfully install Windows Updates inside Clean Boot. Sometimes 3rd party software can conflict with Windows Update and therefore cause Windows Update to be Stuck. In order, Fix Windows 10 install Fails With Error C1900101-4000D, ທ່ານຈໍາເປັນຕ້ອງໄດ້ດໍາເນີນການທໍາຄວາມສະອາດ boot ໃນ PC ຂອງທ່ານແລະວິນິດໄສບັນຫາຂັ້ນຕອນທີ.
Method 5: Upgrade using Windows 10 Media Creation Tool
1.Download Media Creation Tool here.
2.Backup your data from system partition and save your license key.
3.Start the tool and choose to Upgrade this PC now.
4.Accept the license terms.
5.After the installer is ready, choose to Keep personal files and apps.
6.The PC will restart few times and your PC would be successfully upgraded.
ວິທີທີ່ 6: ດໍາເນີນການ SFC ແລະ DISM
1.ກົດ Windows Key + X ແລ້ວກົດໃສ່ Command Prompt (Admin).
2. ຕອນນີ້ພິມໃສ່ໃນ cmd ແລະກົດ enter:
Sfc / scannow sfc /scannow /offbootdir=c: /offwindir=c:windows (ຖ້າຂ້າງເທິງນີ້ລົ້ມເຫລວ, ໃຫ້ລອງອັນນີ້)
3.ລໍຖ້າສໍາລັບຂະບວນການຂ້າງເທິງນີ້ເພື່ອສໍາເລັດຮູບແລະເຮັດເມື່ອ restart PC ຂອງທ່ານ.
4. ເປີດ cmd ອີກເທື່ອໜຶ່ງ ແລະພິມຄຳສັ່ງຕໍ່ໄປນີ້ແລ້ວກົດ enter ຫຼັງຈາກແຕ່ລະອັນ:
a) Dism /Online /Cleanup-Image /CheckHealth b) Dism /Online /Cleanup-Image /ScanHealth c) Dism /Online /Cleanup-Image /RestoreHealth
5.ໃຫ້ຄຳສັ່ງ DISM ແລ່ນ ແລະລໍຖ້າໃຫ້ມັນສຳເລັດ.
6. ຖ້າຄໍາສັ່ງຂ້າງເທິງນີ້ໃຊ້ບໍ່ໄດ້, ໃຫ້ພະຍາຍາມຕໍ່ໄປນີ້:
Dism / ຮູບພາບ:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows Dism /Online /Cleanup-Image /RestoreHealth /Source:c:testmountwindows /LimitAccess
ຫມາຍເຫດ: ປ່ຽນແທນ C:RepairSourceWindows ກັບສະຖານທີ່ຂອງແຫຼ່ງສ້ອມແປງຂອງທ່ານ (ການຕິດຕັ້ງ Windows ຫຼື Recovery Disc).
7.Reboot PC ຂອງທ່ານເພື່ອບັນທຶກການປ່ຽນແປງແລະເບິ່ງວ່າທ່ານສາມາດ Fix Windows 10 install Fails With Error C1900101-4000D.
Method 7: Reset Windows Updates Components
1.ກົດ Windows Key + X ແລ້ວເລືອກ Command Prompt (Admin).
2. ຕອນນີ້ພິມຄໍາສັ່ງຕໍ່ໄປນີ້ເພື່ອຢຸດການບໍລິການ Windows Update ແລະຈາກນັ້ນກົດ Enter ຫຼັງຈາກແຕ່ລະອັນ:
net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver
3.ຕໍ່ໄປ, ພິມຄໍາສັ່ງຕໍ່ໄປນີ້ເພື່ອປ່ຽນຊື່ SoftwareDistribution Folder ແລະຫຼັງຈາກນັ້ນໃຫ້ກົດ Enter:
ren C: WindowsSoftwareDistribution SoftwareDistribution.old
ren C: WindowsSystem32catroot2 catroot2.old
4.ສຸດທ້າຍ, ພິມຄຳສັ່ງຕໍ່ໄປນີ້ເພື່ອເລີ່ມການບໍລິການອັບເດດ Windows ແລະກົດ Enter ຫຼັງຈາກແຕ່ລະອັນ:
net start wuauserv
net start cryptSvc
net start bits
net start msiserver
5.Reboot PC ຂອງທ່ານເພື່ອບັນທຶກການປ່ຽນແປງແລະກວດເບິ່ງວ່າທ່ານສາມາດ Fix Windows 10 install Fails With Error C1900101-4000D.
Method 8: Delete Registry for Mounted Images
1.ກົດ Windows Key + R ແລ້ວພິມ regedit ແລະກົດ Enter ເພື່ອເປີດ Registry Editor.
2.ນຳທາງໄປຫາກະແຈການລົງທະບຽນຕໍ່ໄປນີ້:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWIMMountMounted Images
3. ເລືອກ Mounted Images then in the right window pane right-click on (Default) and select Delete.
4.ອອກຈາກ Registry Editor ແລະ reboot PC ຂອງທ່ານເພື່ອບັນທຶກການປ່ຽນແປງ.
Method 9: Disable Wi-Fi Adapter and CD/DVD Drive
1.ກົດ Windows Key + R ແລ້ວພິມ devmgmtmsc ແລະກົດ Enter ເພື່ອເປີດ Device Manager.
2.Expand DVD/CD-ROM drives, ຈາກນັ້ນຄລິກຂວາໃສ່ຂອງທ່ານ CD/DVD Drive ແລະເລືອກເອົາ ປິດການໃຊ້ອຸປະກອນ.
3.Similarly, expand Network adapters then right-click on your WiFi ອະແດບເຕີແລະເລືອກເອົາ ປິດການໃຊ້ອຸປະກອນ.
4.Again try to run Windows 10 setup and see if you’re able to Fix Windows 10 install Fails With Error C1900101-4000D.
Method 10: Run Malwarebytes and AdwCleaner
Malwarebytes ເປັນເຄື່ອງສະແກນຕາມຄວາມຕ້ອງການທີ່ມີປະສິດທິພາບ ເຊິ່ງຄວນເອົາຕົວເຊື່ອງຂອງຕົວທ່ອງເວັບ, adware ແລະ malware ປະເພດອື່ນໆອອກຈາກ PC ຂອງທ່ານ. ມັນເປັນສິ່ງສໍາຄັນທີ່ຈະສັງເກດວ່າ Malwarebytes ຈະດໍາເນີນການຄຽງຄູ່ກັບຊອບແວຕ້ານໄວຣັສໂດຍບໍ່ມີການຂັດແຍ້ງ. ເພື່ອຕິດຕັ້ງ ແລະເປີດໃຊ້ Malwarebytes Anti-Malware, ໃຫ້ໄປທີ່ບົດຄວາມນີ້ ແລະປະຕິບັດຕາມແຕ່ລະຂັ້ນຕອນ.
1.Download AdwCleaner from this link.
2.Once the download is complete, double-click on the adwcleaner.exe file ເພື່ອດໍາເນີນການໂຄງການ.
3. ຄລິກໃສ່ “ຂ້ອຍຍອມຮັບ” ປຸ່ມ accept the license agreement.
4.On the next screen, click the ປຸ່ມສະແກນ under Actions.
5.Now, wait for the AdwCleaner to search for PUPs and other malicious programs.
6.ເມື່ອການສະແກນສໍາເລັດ, ຄລິກ ທໍາຄວາມສະອາດ in order to clean your system of such files.
7.Save any work you might be doing as your PC will need to reboot, click OK to reboot your PC.
8.Once the computer reboots, a log file will open which will list all of the files, folders, registry keys, etc that were removed in the previous step.
ແນະນໍາໃຫ້:
ນັ້ນແມ່ນທ່ານໄດ້ສໍາເລັດຜົນ Fix Windows 10 install Fails With Error C1900101-4000D ແຕ່ຖ້າທ່ານຍັງມີຄໍາຖາມໃດໆກ່ຽວກັບຄູ່ມືນີ້, ກະລຸນາຖາມພວກເຂົາຢູ່ໃນສ່ວນຄໍາເຫັນ.