Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.

Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.

Depending on your PC you may receive one of the following errors:

• THREAD_STUCK_IN_DEVICE_DRIVER
• STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
• The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.

Few of the cause which can lead to Thread Stuck In Device Driver error are:

• Corrupt or old device drivers
• ຂໍ້ຂັດແຍ່ງຂອງຄົນຂັບຫຼັງຈາກຕິດຕັ້ງຮາດແວ ໃໝ່.
• Error 0xEA blue screen caused by a damaged video card.
• Old BIOS
• Bad Memory

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

So without wasting any time let’s see How to Fix Thread Stuck In Device Driver Error in Windows 10 ດ້ວຍການຊ່ວຍເຫຼືອຂອງຄູ່ມືການແກ້ໄຂບັນຫາທີ່ມີລາຍຊື່ຂ້າງລຸ່ມນີ້.

ວິທີທີ່ 1: ອັບເດດໄດເວີບັດກາຟິກ

If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

ວິທີທີ່ 2: ປິດການເລັ່ງຮາດແວ

1. ກົດ Windows Key + I ເພື່ອເປີດ ການຕັ້ງຄ່າ ຈາກນັ້ນກົດເຂົ້າ ລະບົບ. 

2. From the left-hand side menu, select ການສະແດງ. Now at the bottom of the Display window, click on the Advanced display settings.

3. ດຽວນີ້ໄປ the Troubleshoot tab ແລະຄິກ ປ່ຽນການຕັ້ງຄ່າ.

4. ລາກ Hardware Acceleration slider ກັບ none

5. Click Ok then Apply and restart your PC.

6. If you don’t have the troubleshoot tab then right-click on the desktop and select NVIDIA Control Panel (Every graphic card has their own control panel).

7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.

8. Next, under select, a PhysX processor make sure the CPU is selected.

9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.

10. Reboot PC ຂອງ​ທ່ານ​ແລະ​ເບິ່ງ​ວ່າ​ທ່ານ​ສາ​ມາດ​ເຮັດ​ໄດ້​ fix thread stuck in device driver error in Windows 10, if not, continue.

Method 3: Run SFC and DISM tool

1. ກົດ Windows Key + X ຈາກນັ້ນກົດໃສ່ Command Prompt (Admin).

2. ຕອນນີ້ພິມສິ່ງຕໍ່ໄປນີ້ໃສ່ cmd ແລະກົດ enter:

Sfc / scannow

3. ລໍ​ຖ້າ​ສໍາ​ລັບ​ຂະ​ບວນ​ການ​ຂ້າງ​ເທິງ​ນີ້​ເພື່ອ​ສໍາ​ເລັດ​ແລະ​ເຮັດ​ໄດ້​ຄັ້ງ​ດຽວ restart PC ຂອງ​ທ່ານ​.

4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.

5. ເປີດ cmd ອີກເທື່ອໜຶ່ງ ແລະພິມຄຳສັ່ງຕໍ່ໄປນີ້ແລ້ວກົດ enter ຫຼັງຈາກແຕ່ລະອັນ:

Dism /ອອນໄລນ໌ /Cleanup-Image /CheckHealth Dism /Online /Cleanup-Image /ScanHealth Dism /ອອນໄລນ໌ /Cleanup-Image /RestoreHealth

6. ປ່ອຍໃຫ້ຄໍາສັ່ງ DISM ດໍາເນີນການແລະລໍຖ້າໃຫ້ມັນສໍາເລັດ.

7.  If the above command doesn’t work then try on the below:

Dism / ຮູບພາບ:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows Dism /Online /Cleanup-Image /RestoreHealth /Source:c:testmountwindows /LimitAccess

ຫມາຍ​ເຫດ​: ປ່ຽນແທນ C:RepairSourceWindows ກັບສະຖານທີ່ຂອງແຫຼ່ງສ້ອມແປງຂອງທ່ານ (ການຕິດຕັ້ງ Windows ຫຼື Recovery Disc).

7. Reboot PC ຂອງທ່ານເພື່ອບັນທຶກການປ່ຽນແປງ.

Method 4: Perform Windows update

Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.

1 ກົດປຸ່ມ Windows Key+ ຂ້າ​ພະ​ເຈົ້າ​ຈະ​ເປີດ Settings ຫຼັງ​ຈາກ​ນັ້ນ​ໃຫ້​ຄລິກ​ໃສ່​ ປັບປຸງແລະຄວາມປອດໄພ.

2. ຈາກ​ເບື້ອງ​ຊ້າຍ​ມື​, ເມ​ນູ​ໃຫ້​ຄລິກ​ໃສ່​ Windows Update.

3. ໃນປັດຈຸບັນໃຫ້ຄລິກໃສ່ "ກວດສອບການປັບປຸງ” ປຸ່ມເພື່ອກວດສອບການອັບເດດທີ່ມີຢູ່.

4. ຖ້າມີການປັບປຸງໃດໆທີ່ຍັງຄ້າງຢູ່ຫຼັງຈາກນັ້ນໃຫ້ຄລິກໃສ່ ດາວໂຫຼດ ແລະຕິດຕັ້ງອັບເດດ.

5. ເມື່ອການອັບເດດຖືກດາວໂຫຼດແລ້ວ, ໃຫ້ຕິດຕັ້ງພວກມັນ ແລະ Windows ຂອງເຈົ້າຈະກາຍເປັນອັບເດດ.

6. ຫຼັງຈາກການປັບປຸງໄດ້ຖືກຕິດຕັ້ງ reboot PC ຂອງທ່ານເພື່ອບັນທຶກການປ່ຽນແປງ.

Method 5: Run Windows 10 BSOD Troubleshooter

If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).

1. Press Windows key + I to open Settings then click on ‘ປັບປຸງແລະຄວາມປອດໄພ'.

2. From the left pane, select ‘ແກ້ໄຂບັນຫາ'.

3. ເລື່ອນລົງໄປຫາ 'ຊອກຫາແລະແກ້ໄຂບັນຫາອື່ນໆ' ພາກສ່ວນ.

4. ກົດທີ່ 'ຈໍສີຟ້າ'ແລະ​ໃຫ້​ຄລິກ​ໃສ່ 'ແລ່ນ troubleshooter'.

Method 6: Give Graphics Card Access to the Application

1. ກົດ Windows Key + I ເພື່ອເປີດ Settings ຫຼັງຈາກນັ້ນໃຫ້ຄລິກໃສ່ ລະບົບ.

2. ຈາກ​ເມ​ນູ​ຊ້າຍ​ມື​ເລືອກ​ ການສະແດງ ຈາກນັ້ນກົດເຂົ້າ Graphics settings link ຢູ່ທາງລຸ່ມ.

3. Select the type of app, if you can’t find your app or game in the list then select the ແອັບຄລາສສິກ and then use the “ເອີ້ນເບິ່ງ"ທາງເລືອກ.

4. Navigate to your application or game, ເລືອກມັນ, ແລະກົດ ເປີດ.

5. Once the app is added to the list, click on it then again click on ຕົວເລືອກ.

6. ເລືອກ“ການປະຕິບັດສູງ” and click on Save.

7. Reboot PC ຂອງທ່ານເພື່ອບັນທຶກການປ່ຽນແປງ.

Method 7: Update BIOS (Basic Input/Output System)

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.

Method 8: Reset Overclocking Settings

If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.

Method 9: Faulty GPU

Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.

ວິທີທີ່ 10: ກວດສອບການສະຫນອງພະລັງງານ

A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

ນັ້ນ​ແມ່ນ​ທ່ານ​ໄດ້​ສໍາ​ເລັດ​ຜົນ​ Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.