Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.

Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.

Depending on your PC you may receive one of the following errors:

• THREAD_STUCK_IN_DEVICE_DRIVER
• STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
• The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.

Few of the cause which can lead to Thread Stuck In Device Driver error are:

• Corrupt or old device drivers
• Draivera konflikts pēc jaunas aparatūras instalēšanas.
• Error 0xEA blue screen caused by a damaged video card.
• Old BIOS
• Bad Memory

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Tāpēc, netērējot laiku, apskatīsim, kā to izdarīt Fix Thread Stuck In Device Driver Error in Windows 10 izmantojot tālāk norādīto problēmu novēršanas rokasgrāmatu.

1. metode: atjauniniet grafiskās kartes draiverus

If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

2. metode: atspējojiet aparatūras paātrinājumu

1. Nospiediet Windows taustiņu + I, lai atvērtu Settings pēc tam noklikšķiniet uz Sistēma. 

2. From the left-hand side menu, select displejs. Now at the bottom of the Display window, click on the Advanced display settings.

3. Tagad dodieties uz the Troubleshoot tab un noklikšķiniet Mainīt iestatījumus.

4. Velciet Hardware Acceleration slider uz Nav

5. Click Ok then Apply and restart your PC.

6. If you don’t have the troubleshoot tab then right-click on the desktop and select NVIDIA vadības panelis (Every graphic card has their own control panel).

7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.

8. Next, under select, a PhysX processor make sure the CPU is selected.

9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.

10. Restartējiet datoru un pārbaudiet, vai varat fix thread stuck in device driver error in Windows 10, if not, continue.

Method 3: Run SFC and DISM tool

1. Nospiediet Windows taustiņu + X, pēc tam noklikšķiniet uz Komandu uzvedne (administrators).

2. Tagad cmd ierakstiet šo un nospiediet enter:

PMK / scannow

3. Pagaidiet, līdz beidzas iepriekš minētais process, un pēc tam restartējiet datoru.

4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.

5. Atkal atveriet cmd un ierakstiet šo komandu un pēc katras nospiediet taustiņu Enter:

Dism /Tiešsaiste /Cleanup-Image /CheckHealth Dism /Tiešsaiste /Cleanup-Image /ScanHealth Dism /Tiešsaiste /Cleanup-Image /RestoreHealth

6. Ļaujiet DISM komandai palaist un gaidiet, līdz tā beigsies.

7.  If the above command doesn’t work then try on the below:

Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows Dism /Tiešsaiste /Cleanup-Image /RestoreHealth /Source:c:testmountwindows /LimitAccess

Piezīme: Aizstājiet C:RepairSourceWindows ar remonta avota atrašanās vietu (Windows instalācijas vai atkopšanas disks).

7. Restartējiet datoru, lai saglabātu izmaiņas.

Method 4: Perform Windows update

Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.

1. Nospiediet Windows taustiņš + I, lai atvērtu iestatījumus, pēc tam noklikšķiniet uz Atjaunināšana un drošība.

2. Kreisajā pusē izvēlnē noklikšķiniet uz Windows Update.

3. Tagad noklikšķiniet uz “Pārbaudīt atjauninājumus” pogu, lai pārbaudītu, vai nav pieejami atjauninājumi.

4. Ja tiek gaidīti atjauninājumi, noklikšķiniet uz Lejupielādēt un instalēt atjauninājumus.

5. Kad atjauninājumi ir lejupielādēti, instalējiet tos, un sistēma Windows tiks atjaunināta.

6. After the updates are installed reboot your PC to save changes.

Method 5: Run Windows 10 BSOD Troubleshooter

If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).

1. Press Windows key + I to open Settings then click on ‘Atjaunināšana un drošība'.

2. From the left pane, select ‘novēršana'.

3. Ritiniet uz leju līdz "Atrodiet un novērsiet citas problēmas' sadaļas.

4. Noklikšķiniet uz 'Blue Screen"un noklikšķiniet uz"Palaidiet problēmu novēršanas rīku'.

Method 6: Give Graphics Card Access to the Application

1. Nospiediet Windows taustiņu + I, lai atvērtu iestatījumus, pēc tam noklikšķiniet uz Sistēma.

2. Kreisajā izvēlnē atlasiet displejs pēc tam noklikšķiniet uz Graphics settings link apakšā.

3. Select the type of app, if you can’t find your app or game in the list then select the Klasiskā lietotne and then use the “Pārlūkot"Variants.

4. Navigate to your application or game, atlasiet to un noklikšķiniet Atvērt.

5. Once the app is added to the list, click on it then again click on Iespējas.

6. Atlasiet “Augstas veiktspējas” and click on Save.

7. Restartējiet datoru, lai saglabātu izmaiņas.

7. metode: atjauniniet BIOS (pamata ievades/izvades sistēma)

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.

Method 8: Reset Overclocking Settings

If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.

Method 9: Faulty GPU

Iespējams, ka jūsu sistēmā instalētais GPU var būt bojāts, tāpēc viens no veidiem, kā to pārbaudīt, ir noņemt speciālo grafisko karti un atstāt sistēmā tikai vienu integrētu un pārbaudīt, vai problēma ir atrisināta. Ja problēma ir atrisināta, tad jūsu GPU ir bojāts, un tas ir jāaizstāj ar jaunu, bet pirms tam varat mēģināt iztīrīt grafisko karti un vēlreiz ievietot to mātesplatē, lai redzētu, vai tā darbojas vai nē.

10. metode: pārbaudiet barošanas avotu

A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Tas ir tas, kas jums ir veiksmīgi Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.