Fix Windows 10 install Fails With Error C1900101-4000D
Fix Windows 10 install Fails With Error C1900101-4000D: If you’re trying to upgrade to Windows 10 but the install fails with error code C1900101-4000D then don’t worry as it occurs because the Windows installer cannot access important files required for installation. Sometimes this error is also caused because of a conflict during installation but you can’t be sure as there is no error message accompanying this error.
0xC1900101-0x4000D
The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation
While there is no definite fix for this issue but users seem to be recommending a clean installation of Windows 10 which should only be used as a last resort. So without wasting any time let’s see How to Fix Windows 10 install Fails With Error C1900101-4000D with the help of below-listed troubleshooting guide.
Fix Windows 10 install Fails With Error C1900101-4000D
മുൻവ്യവസ്ഥകൾ
a)Make sure to Update all drivers, including graphic, sound, BIOS, USB devices, printers, etc before the installing Windows 10.
b)Remove all external USB devices such as pen drive, external hard disk, USB keyboard & mouse, USB printer and all peripherals.
c)Use an ethernet cable instead of WiFi and disable WiFi until the update is complete.
Method 1: Temporarily Disable Antivirus and Firewall before attempting Upgrade
1. റൈറ്റ് ക്ലിക്ക് ചെയ്യുക ആൻ്റിവൈറസ് പ്രോഗ്രാം ഐക്കൺ സിസ്റ്റം ട്രേയിൽ നിന്ന് തിരഞ്ഞെടുക്കുക പ്രവർത്തനരഹിതമാക്കുക.
2.അടുത്തതായി, ഏത് സമയപരിധി തിരഞ്ഞെടുക്കുക ആൻ്റിവൈറസ് പ്രവർത്തനരഹിതമായി തുടരും.
കുറിപ്പ്: സാധ്യമായ ഏറ്റവും ചെറിയ സമയം തിരഞ്ഞെടുക്കുക, ഉദാഹരണത്തിന് 15 മിനിറ്റ് അല്ലെങ്കിൽ 30 മിനിറ്റ്.
3.Once done, again try to upgrade your PC and check if the error resolves or not.
4.Type control in the Windows Search then click on നിയന്ത്രണ പാനൽ തിരയൽ ഫലത്തിൽ നിന്ന്.
5.അടുത്തത്, ക്ലിക്ക് ചെയ്യുക സിസ്റ്റവും സുരക്ഷയും.
6. തുടർന്ന് ക്ലിക്ക് ചെയ്യുക വിൻഡോസ് ഫയർവാൾ.
7.ഇപ്പോൾ ഇടത് വിൻഡോ പാളിയിൽ നിന്ന് ക്ലിക്ക് ചെയ്യുക വിൻഡോസ് ഫയർവാൾ ഓൺ അല്ലെങ്കിൽ ഓഫ് ചെയ്യുക.
8.വിൻഡോസ് ഫയർവാൾ ഓഫ് ചെയ്യുക തിരഞ്ഞെടുത്ത് നിങ്ങളുടെ പിസി പുനരാരംഭിക്കുക. Again try to upgrade your PC and see if you’re able to Fix Windows 10 install Fails With Error C1900101-4000D.
മുകളിലുള്ള രീതി പ്രവർത്തിക്കുന്നില്ലെങ്കിൽ, നിങ്ങളുടെ ഫയർവാൾ വീണ്ടും ഓണാക്കാൻ കൃത്യമായ അതേ ഘട്ടങ്ങൾ പാലിക്കുന്നത് ഉറപ്പാക്കുക.
Method 2: Remove any hyphens from your computer or machine name
1.വിൻഡോസ് കീ + ആർ അമർത്തി ടൈപ്പ് ചെയ്യുക sysdm.cpl തുറക്കാൻ എന്റർ അമർത്തുക സിസ്റ്റം പ്രോപ്പർട്ടികൾ.
2.Make sure you’re under കമ്പ്യൂട്ടറിന്റെ പേര് ടാബ് തുടർന്ന് ക്ലിക്കുചെയ്യുക മാറ്റം ചുവടെയുള്ള ബട്ടൺ.
3.Make sure your machine name is simple no periods or hyphens or dashes.
4.Click OK then Apply followed by OK.
5. മാറ്റങ്ങൾ സംരക്ഷിക്കാൻ നിങ്ങളുടെ പിസി റീബൂട്ട് ചെയ്യുക.
രീതി 3: വിൻഡോസ് കാലികമാണെന്ന് ഉറപ്പാക്കുക
1. വിൻഡോസ് കീ + I അമർത്തുക, തുടർന്ന് തിരഞ്ഞെടുക്കുക അപ്ഡേറ്റും സുരക്ഷയും.
2.അടുത്തത്, വീണ്ടും ക്ലിക്ക് ചെയ്യുക അപ്ഡേറ്റുകൾക്കായി പരിശോധിക്കുക കൂടാതെ തീർച്ചപ്പെടുത്താത്ത അപ്ഡേറ്റുകൾ ഇൻസ്റ്റാൾ ചെയ്യുന്നുണ്ടെന്ന് ഉറപ്പാക്കുക.
3. അപ്ഡേറ്റുകൾ ഇൻസ്റ്റാൾ ചെയ്ത ശേഷം നിങ്ങളുടെ പിസി റീബൂട്ട് ചെയ്ത് നിങ്ങൾക്ക് കഴിയുമോ എന്ന് നോക്കുക Fix Windows 10 install Fails With Error C1900101-4000D.
രീതി 4: ഒരു ക്ലീൻ ബൂട്ട് നടത്തുക
This would make sure that if any 3rd party application is conflicting with Windows update then you will be able to successfully install Windows Updates inside Clean Boot. Sometimes 3rd party software can conflict with Windows Update and therefore cause Windows Update to be Stuck. In order, Fix Windows 10 install Fails With Error C1900101-4000D, നിങ്ങളുടെ പിസിയിൽ ഒരു ക്ലീൻ ബൂട്ട് നടത്തുകയും ഘട്ടം ഘട്ടമായി പ്രശ്നം കണ്ടെത്തുകയും വേണം.
Method 5: Upgrade using Windows 10 Media Creation Tool
1.Download Media Creation Tool here.
2.Backup your data from system partition and save your license key.
3.Start the tool and choose to Upgrade this PC now.
4.Accept the license terms.
5.After the installer is ready, choose to Keep personal files and apps.
6.The PC will restart few times and your PC would be successfully upgraded.
രീതി 6: SFC, DISM എന്നിവ പ്രവർത്തിപ്പിക്കുക
1.വിൻഡോസ് കീ + എക്സ് അമർത്തുക, തുടർന്ന് ക്ലിക്ക് ചെയ്യുക കമാൻഡ് പ്രോംപ്റ്റ് (അഡ്മിൻ).
2.ഇപ്പോൾ cmd-ൽ താഴെ പറയുന്നവ ടൈപ്പ് ചെയ്ത് എൻ്റർ അമർത്തുക:
Sfc / scannow sfc / scannow /offbootdir = c: /offwindir = c:windows (മുകളിൽ പരാജയപ്പെടുകയാണെങ്കിൽ, ഇത് പരീക്ഷിക്കുക)
3. മുകളിലുള്ള പ്രക്രിയ പൂർത്തിയാകുന്നതുവരെ കാത്തിരിക്കുക, ഒരിക്കൽ നിങ്ങളുടെ പിസി പുനരാരംഭിക്കുക.
4. വീണ്ടും cmd തുറന്ന് ഇനിപ്പറയുന്ന കമാൻഡ് ടൈപ്പ് ചെയ്ത് ഓരോന്നിനും ശേഷം എൻ്റർ അമർത്തുക:
എ) ഡിസ്സം /ഓൺലൈൻ /ക്ലീനപ്പ്-ഇമേജ് /ചെക്ക് ഹെൽത്ത് ബി) ഡിസം /ഓൺലൈൻ /ക്ലീനപ്പ്-ഇമേജ് /സ്കാൻഹെൽത്ത് സി) ഡിസം /ഓൺലൈൻ /ക്ലീനപ്പ്-ഇമേജ് /റിസ്റ്റോർഹെൽത്ത്
5. DISM കമാൻഡ് പ്രവർത്തിപ്പിക്കട്ടെ, അത് പൂർത്തിയാകുന്നതുവരെ കാത്തിരിക്കുക.
6. മുകളിലുള്ള കമാൻഡ് പ്രവർത്തിക്കുന്നില്ലെങ്കിൽ താഴെയുള്ളവയിൽ ശ്രമിക്കുക:
ഡിസം / ഇമേജ്:സി: ഓഫ്ലൈൻ /ക്ലീനപ്പ്-ഇമേജ് /റിസ്റ്റോർഹെൽത്ത് /സോഴ്സ്:സി:ടെസ്റ്റ്മൗണ്ട് വിൻഡോസ് ഡിസം /ഓൺലൈൻ /ക്ലീനപ്പ്-ഇമേജ് /റിസ്റ്റോർഹെൽത്ത് /സോഴ്സ്:സി:ടെസ്റ്റ്മൗണ്ട് വിൻഡോസ് /ലിമിറ്റ് ആക്സസ്
കുറിപ്പ്: C:RepairSourceWindows-ന് പകരം നിങ്ങളുടെ റിപ്പയർ ഉറവിടത്തിൻ്റെ സ്ഥാനം (വിൻഡോസ് ഇൻസ്റ്റലേഷൻ അല്ലെങ്കിൽ റിക്കവറി ഡിസ്ക്).
7. മാറ്റങ്ങൾ സംരക്ഷിക്കാൻ നിങ്ങളുടെ പിസി റീബൂട്ട് ചെയ്യുക, നിങ്ങൾക്ക് കഴിയുമോ എന്ന് നോക്കുക Fix Windows 10 install Fails With Error C1900101-4000D.
Method 7: Reset Windows Updates Components
1.Windows കീ + X അമർത്തുക എന്നിട്ട് തിരഞ്ഞെടുക്കുക കമാൻഡ് പ്രോംപ്റ്റ് (അഡ്മിൻ).
2. ഇപ്പോൾ വിൻഡോസ് അപ്ഡേറ്റ് സേവനങ്ങൾ നിർത്തുന്നതിന് ഇനിപ്പറയുന്ന കമാൻഡുകൾ ടൈപ്പ് ചെയ്യുക, തുടർന്ന് ഓരോന്നിനും ശേഷം എൻ്റർ അമർത്തുക:
നെറ്റ് സ്റ്റോപ്പ് വൂസർസേ
നെറ്റ് സ്റ്റോപ്പ് cryptSvc
നെറ്റ് സ്റ്റോപ്പ് ബിറ്റുകൾ
നെറ്റ് സ്റ്റോപ്പ് msiserver
3.അടുത്തതായി, സോഫ്റ്റ്വെയർ ഡിസ്ട്രിബ്യൂഷൻ ഫോൾഡർ പുനർനാമകരണം ചെയ്യുന്നതിന് ഇനിപ്പറയുന്ന കമാൻഡ് ടൈപ്പ് ചെയ്യുക, തുടർന്ന് എൻ്റർ അമർത്തുക:
റെൻ സി: WindowsSoftwareDistribution SoftwareDistribution.old
റെൻ സി: WindowsSystem32catroot2 catroot2.old
4.അവസാനം, വിൻഡോസ് അപ്ഡേറ്റ് സേവനങ്ങൾ ആരംഭിക്കുന്നതിന് ഇനിപ്പറയുന്ന കമാൻഡ് ടൈപ്പ് ചെയ്ത് ഓരോന്നിനും ശേഷം എൻ്റർ അമർത്തുക:
നെറ്റ് തുടക്കം wuauserv
net start cryptSvc
നെറ്റ് ആരംഭ ബിറ്റുകൾ
net start msiserver
5. മാറ്റങ്ങൾ സംരക്ഷിക്കാൻ നിങ്ങളുടെ പിസി റീബൂട്ട് ചെയ്യുക, നിങ്ങൾക്ക് കഴിയുമോയെന്ന് പരിശോധിക്കുക Fix Windows 10 install Fails With Error C1900101-4000D.
Method 8: Delete Registry for Mounted Images
1.വിൻഡോസ് കീ + ആർ അമർത്തി ടൈപ്പ് ചെയ്യുക regedit രജിസ്ട്രി എഡിറ്റർ തുറക്കാൻ എന്റർ അമർത്തുക.
2. ഇനിപ്പറയുന്ന രജിസ്ട്രി കീയിലേക്ക് നാവിഗേറ്റ് ചെയ്യുക:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWIMMountMounted Images
3. തിരഞ്ഞെടുക്കുക Mounted Images then in the right window pane right-click on (Default) and select Delete.
4.Exit Registry Editor and reboot your PC to save changes.
Method 9: Disable Wi-Fi Adapter and CD/DVD Drive
1.വിൻഡോസ് കീ + ആർ അമർത്തി ടൈപ്പ് ചെയ്യുക devmgmt.msc ഉപകരണ മാനേജർ തുറക്കാൻ എൻ്റർ അമർത്തുക.
2.Expand DVD/CD-ROM drives, തുടർന്ന് നിങ്ങളുടേതിൽ റൈറ്റ് ക്ലിക്ക് ചെയ്യുക സിഡി/ഡിവിഡി ഡ്രൈവ് തെരഞ്ഞെടുക്കുക ഉപകരണം പ്രവർത്തനരഹിതമാക്കുക.
3.Similarly, expand Network adapters then right-click on your WiFi അഡാപ്റ്റർ തിരഞ്ഞെടുത്ത് തിരഞ്ഞെടുക്കുക ഉപകരണം പ്രവർത്തനരഹിതമാക്കുക.
4.Again try to run Windows 10 setup and see if you’re able to Fix Windows 10 install Fails With Error C1900101-4000D.
Method 10: Run Malwarebytes and AdwCleaner
നിങ്ങളുടെ പിസിയിൽ നിന്ന് ബ്രൗസർ ഹൈജാക്കർമാർ, ആഡ്വെയർ, മറ്റ് തരത്തിലുള്ള ക്ഷുദ്രവെയർ എന്നിവ നീക്കം ചെയ്യുന്ന ശക്തമായ ഓൺ-ഡിമാൻഡ് സ്കാനറാണ് Malwarebytes. വൈരുദ്ധ്യങ്ങളില്ലാതെ ആൻ്റിവൈറസ് സോഫ്റ്റ്വെയറിനൊപ്പം Malwarebytes പ്രവർത്തിക്കും എന്നത് ശ്രദ്ധിക്കേണ്ടതാണ്. Malwarebytes Anti-Malware ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും പ്രവർത്തിപ്പിക്കുന്നതിനും, ഈ ലേഖനത്തിലേക്ക് പോയി ഓരോ ഘട്ടവും പിന്തുടരുക.
1.Download AdwCleaner from this link.
2.Once the download is complete, double-click on the adwcleaner.exe file പ്രോഗ്രാം പ്രവർത്തിപ്പിക്കാൻ.
3. ക്ലിക്ക് ചെയ്യുക "ഞാൻ അംഗീകരിക്കുന്നു”ബട്ടൺ ലൈസൻസ് കരാർ അംഗീകരിക്കുക.
4.On the next screen, click the ബട്ടൺ സ്കാൻ ചെയ്യുക under Actions.
5.Now, wait for the AdwCleaner to search for PUPs and other malicious programs.
6. സ്കാൻ പൂർത്തിയായിക്കഴിഞ്ഞാൽ, ക്ലിക്ക് ചെയ്യുക വെടിപ്പുള്ള in order to clean your system of such files.
7.Save any work you might be doing as your PC will need to reboot, click OK to reboot your PC.
8.Once the computer reboots, a log file will open which will list all of the files, folders, registry keys, etc that were removed in the previous step.
ശുപാർശ ചെയ്ത:
അതാണ് നിങ്ങൾ വിജയകരമായി പൂർത്തിയാക്കിയത് Fix Windows 10 install Fails With Error C1900101-4000D എന്നാൽ ഈ ഗൈഡിനെക്കുറിച്ച് നിങ്ങൾക്ക് ഇപ്പോഴും എന്തെങ്കിലും ചോദ്യങ്ങൾ ഉണ്ടെങ്കിൽ, അഭിപ്രായ വിഭാഗത്തിൽ അവരോട് ചോദിക്കാൻ മടിക്കേണ്ടതില്ല.