Хоёрдугаар сарын 6, 2018

Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Fix Computer does not start until restarted multiple times

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

Ямар нэг зүйл буруу болсон тохиолдолд сэргээх цэг үүсгэхээ мартуузай.

Тайлбар: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

Арга 1: Хурдан эхлүүлэхийг унтраа

1.Press Windows Key + R then type control and hit Enter to open Хяналтын самбар.

хяналтын самбар

2 дээр дарна уу Техник, дуу чимээ дээр дарна уу Эрчим хүчний сонголтууд.

хяналтын самбар дээрх тэжээлийн сонголтууд

3. Дараа нь зүүн талын цонхноос "Товчлуурын товчийг сонго."

асаах товчнууд юу хийхийг сонгоно уу USB-г танихгүй засвар

4. Одоо " дээр дарна уу.Одоогоор боломжгүй байгаа тохиргоог өөрчлөх."

одоогоор боломжгүй байгаа тохиргоог өөрчлөх

5.Uncheck “Хурдан эхлүүлээрэй” гэснийг сонгоод Өөрчлөлтийг хадгалах дээр дарна уу.

Хурдан эхлүүлэхийг идэвхжүүлэх сонголтыг арилгана

Арга 2: Автомат засварыг ажиллуул

1.Windows 10 ачаалах боломжтой суулгах DVD-г оруулна уу компьютераа дахин эхлүүлэх.

2.When prompted to Дурын товчлуурыг дарна уу CD эсвэл DVD-ээс ачаалах бол үргэлжлүүлэхийн тулд дурын товчлуурыг дарна уу.

CD эсвэл DVD-ээс ачаалахын тулд дурын товчлуурыг дарна уу

3. Хэлнийхээ тохиргоог сонгоод Next товчийг дарна уу. Засвар дээр дарна уу таны компьютер зүүн доод талд байна.

Компьютерээ засаарай

4. Сонголт хийх дэлгэцийг сонгоод товшино уу Асуудлыг шийдэх.

Windows 10 автоматаар эхлүүлэх засварын сонголтыг сонгоно уу

5.Алдааг олж засварлах дэлгэц дээр товшино уу Нарийвчилсан сонголт.

Асуудлыг олж засварлах дэлгэцээс нэмэлт сонголтыг сонгоно уу

6. Нарийвчилсан сонголтуудын дэлгэцэн дээр дарна уу Автомат засвар эсвэл эхлүүлэх засвар.

автомат засварыг ажиллуул

7. Хүлээгээрэй Windows автомат / эхлүүлэх засвар бүрэн.

8.Дахин эхлүүлснээр амжилттай боллоо Fix Computer does not start until restarted multiple times issue, үгүй бол үргэлжлүүлээрэй.

Мөн уншаарай Хэрхэн засах вэ Автомат засвар нь таны компьютерийг засч чадаагүй.

Method 3: Reset BIOS to default settings

1. Зөөврийн компьютерээ унтрааж, дараа нь асаагаад нэгэн зэрэг асаана F2, DEL эсвэл F12 товчийг дарна уу (таны үйлдвэрлэгчээс хамаарч) оруулах BIOS-ийн тохиргоо.

BIOS тохиргоо руу орохын тулд DEL эсвэл F2 товчийг дарна уу

2. Одоо та дахин тохируулах сонголтыг олох хэрэгтэй өгөгдмөл тохиргоог ачаалах Энэ нь "Өгөгдмөл байдалд дахин тохируулах", "Үйлдвэрийн тохиргоог ачаалах", "BIOS тохиргоог арилгах", "Өгөгдмөл тохиргоог ачаалах" эсвэл үүнтэй төстэй зүйл байж болно.

BIOS-д анхдагч тохиргоог ачаална уу

3. Сум товчлуураар үүнийг сонгоод Enter дарж үйлдлийг баталгаажуулна уу. Таны BIOS одоо үүнийг ашиглах болно анхдагч тохиргоо.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Компьютерийн хатуу диск зөв холбогдсон эсэхийг шалгана уу

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

Арга 5: Цахилгаан хангамжийг шалгана уу

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

Алдаатай цахилгаан хангамж

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

Method 7: ATX Resetting

Тайлбар: This process generally applies to laptops, so if you have a computer then leave this method.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2. Одоо зайг ав from behind and press & hold the power button for 15-20 seconds.

зайгаа салга

Тайлбар: Do not connect the power cord just yet, we will tell you when to do that.

3.Now plug in your power cord (battery should not be inserted) and trying booting up your laptop.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

Зөвлөмж:

Ингэснээр та амжилттай байна Fix Computer does not start until restarted multiple times issue гэхдээ танд энэ гарын авлагатай холбоотой асуулт байгаа бол коммент хэсэгт асуугаарай.