Fix Windows 10 install Fails With Error C1900101-4000D

Fix Windows 10 install Fails With Error C1900101-4000D: If you’re trying to upgrade to Windows 10 but the install fails with error code C1900101-4000D then don’t worry as it occurs because the Windows installer cannot access important files required for installation. Sometimes this error is also caused because of a conflict during installation but you can’t be sure as there is no error message accompanying this error.

0xC1900101-0x4000D
The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation

While there is no definite fix for this issue but users seem to be recommending a clean installation of Windows 10 which should only be used as a last resort. So without wasting any time let’s see How to Fix Windows 10 install Fails With Error C1900101-4000D with the help of below-listed troubleshooting guide.

Fix Windows 10 install Fails With Error C1900101-4000D

Prerekwiżiti

a)Make sure to Update all drivers, including graphic, sound, BIOS, USB devices, printers, etc before the installing Windows 10.

b)Remove all external USB devices such as pen drive, external hard disk, USB keyboard & mouse, USB printer and all peripherals.

c)Use an ethernet cable instead of WiFi and disable WiFi until the update is complete.

Method 1: Temporarily Disable Antivirus and Firewall before attempting Upgrade

1.Ikklikkja bil-lemin fuq il- Ikona tal-Programm Antivirus mit-trej tas-sistema u agħżel Inattiv.

2.Li jmiss, agħżel il-qafas ta 'żmien li għalih il- L-antivirus se jibqa' diżattivat.

Nota: Agħżel l-iżgħar ammont ta' ħin possibbli pereżempju 15-il minuta jew 30 minuta.

3.Once done, again try to upgrade your PC  and check if the error resolves or not.

4.Type control in the Windows Search then click on Control Panel mir-riżultat tat-tfittxija.

5.Li jmiss, ikklikkja fuq Sistema u Sigurtà.

6.Imbagħad ikklikkja fuq Windows Firewall.

7.Issa mill-ħġieġa tat-tieqa tax-xellug ikklikkja fuq Ixgħel jew itfi Windows Firewall.

8.Agħżel Itfi Windows Firewall u erġa ibda l-PC tiegħek. Again try to upgrade your PC and see if you’re able to Fix Windows 10 install Fails With Error C1900101-4000D.

Jekk il-metodu ta 'hawn fuq ma jaħdimx kun żgur li ssegwi l-istess passi eżatti biex terġa' tixgħel il-Firewall tiegħek.

Method 2: Remove any hyphens from your computer or machine name

1.Agħfas Windows Key + R imbagħad ittajpja sysdm.cpl u agħfas Enter biex tiftaħ Proprjetajiet tas-Sistema.

2.Make sure you’re under Tab Isem tal-Kompjuter imbagħad ikklikkja fuq Bidla buttuna fil-qiegħ.

3.Make sure your machine name is simple no periods or hyphens or dashes.

4.Click OK then Apply followed by OK.

5.Reboot PC tiegħek biex issalva l-bidliet.

Metodu 3: Kun żgur li Windows huwa aġġornat

1.Agħfas Windows Key + I mbagħad tagħżel Aġġornament u Sigurtà.

2.Li jmiss, għal darb'oħra ikklikkja Iċċekkja għal aġġornamenti u kun żgur li tinstalla kwalunkwe aġġornamenti pendenti.

3.Wara li l-aġġornamenti jiġu installati reboot PC tiegħek u ara jekk int kapaċi Fix Windows 10 install Fails With Error C1900101-4000D.

Metodu 4: Wettaq Boot Nadif

This would make sure that if any 3rd party application is conflicting with Windows update then you will be able to successfully install Windows Updates inside Clean Boot. Sometimes 3rd party software can conflict with Windows Update and therefore cause Windows Update to be Stuck. In order, Fix Windows 10 install Fails With Error C1900101-4000D, għandek bżonn twettaq boot nadif fuq il-PC tiegħek u tiddijanjostika l-kwistjoni pass pass.

Method 5: Upgrade using Windows 10 Media Creation Tool

1.Download Media Creation Tool here.

2.Backup your data from system partition and save your license key.

3.Start the tool and choose to Upgrade this PC now.

4.Accept the license terms.

5.After the installer is ready, choose to Keep personal files and apps.

6.The PC will restart few times and your PC would be successfully upgraded.

Metodu 6: Mexxi SFC u DISM

1.Agħfas Windows Key + X imbagħad ikklikkja fuq Kmand Prompt (Amministratur).

2.Issa ittajpja dan li ġej fis-cmd u agħfas enter:

Sfc /scannow sfc /scannow /offbootdir=c: /offwindir=c:windows (Jekk hawn fuq jonqos imbagħad ipprova dan)

3.Stenna li l-proċess ta 'hawn fuq jintemm u ladarba jkun lest jerġa' jibda l-PC tiegħek.

4.Erġa' iftaħ cmd u ikteb il-kmand li ġej u agħfas enter wara kull waħda:

a) Dism /Online /Cleanup-Image /CheckHealth b) Dism /Online /Cleanup-Image /ScanHealth c) Dism /Online /Cleanup-Image /RestoreHealth

5.Ħalli l-kmand DISM jaħdem u stenna li jispiċċa.

6. Jekk il-kmand ta 'hawn fuq ma jaħdimx imbagħad ipprova hawn taħt:

Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows Dism /Online /Cleanup-Image /RestoreHealth /Source:c:testmountwindows /LimitAccess

Nota: Ibdel is-C:RepairSourceWindows bil-post tas-sors tat-tiswija tiegħek (Windows Installazzjoni jew Diska ta' Rkupru).

7.Reboot PC tiegħek biex issalva l-bidliet u ara jekk int kapaċi Fix Windows 10 install Fails With Error C1900101-4000D.

Method 7: Reset Windows Updates Components

1.Agħfas Windows Key + X imbagħad agħżel Kmand Prompt (Admin).

2.Issa ittajpja l-kmandi li ġejjin biex twaqqaf Windows Update Services u mbagħad agħfas Enter wara kull waħda:

stop nett wuauserv
nett stop cryptSvc
bits ta 'waqfien nett
net stop msiserver

3.Li jmiss, ittajpja l-kmand li ġej biex tibdel l-isem tal-Folder tad-Distribuzzjoni tas-Software u mbagħad agħfas Enter:

ren C: WindowsSoftwareDistribuzzjoni SoftwareDistribuzzjoni.old
ren C: WindowsSystem32catroot2 erbaot2.old

4. Fl-aħħarnett, ittajpja l-kmand li ġej biex tibda Windows Update Services u agħfas Enter wara kull waħda:

bidu nett wuauserv
bidu nett cryptSvc
bits ta 'startjar nett
net start msiserver

5.Reboot PC tiegħek biex issalva l-bidliet u jiċċekkja jekk inti kapaċi Fix Windows 10 install Fails With Error C1900101-4000D.

Method 8: Delete Registry for Mounted Images

1.Agħfas Windows Key + R imbagħad ittajpja regedit u agħfas Enter biex tiftaħ Editur tar-Reġistru.

2.Naviga lejn iċ-ċavetta tar-reġistru li ġejja:

HKEY_LOCAL_MACHINESOFTWAREMicrosoftWIMMountMounted Images

3. Agħżel Mounted Images then in the right window pane right-click on (Default) and select Delete.

4.Oħroġ mill-Editur tar-Reġistru u reboot il-PC tiegħek biex issalva l-bidliet.

Method 9: Disable Wi-Fi Adapter and CD/DVD Drive

1.Agħfas Windows Key + R imbagħad ittajpja devmgmt.msc u agħfas Enter biex tiftaħ Device Manager.

2.Expand DVD/CD-ROM drives, imbagħad ikklikkja bil-lemin fuq tiegħek CD/DVD Drive u agħżel Itfi l-apparat.

3.Similarly, expand Network adapters then right-click on your WiFi adapter u agħżel Itfi l-apparat.

4.Again try to run Windows 10 setup and see if you’re able to Fix Windows 10 install Fails With Error C1900101-4000D.

Method 10: Run Malwarebytes and AdwCleaner

Malwarebytes huwa skaner qawwi fuq talba li għandu jneħħi l-ħjackers tal-browser, adware u tipi oħra ta' malware mill-PC tiegħek. Huwa importanti li wieħed jinnota li Malwarebytes se jaħdem flimkien ma 'softwer antivirus mingħajr kunflitti. Biex tinstalla u tħaddem Malwarebytes Anti-Malware, mur dan l-artikolu u segwi kull pass.

1.Download AdwCleaner from this link.

2.Once the download is complete, double-click on the adwcleaner.exe file biex tmexxi l-programm.

3. Ikklikkja fuq "Naqbel”Buttuna għal accept the license agreement.

4.On the next screen, click the Buttuna ta 'skennjar under Actions.

5.Now, wait for the AdwCleaner to search for PUPs and other malicious programs.

6.Ladarba l-iskan ikun komplut, ikklikkja Naddaf in order to clean your system of such files.

7.Save any work you might be doing as your PC will need to reboot, click OK to reboot your PC.

8.Once the computer reboots, a log file will open which will list all of the files, folders, registry keys, etc that were removed in the previous step.

Rakkomandata:

Dak li għandek b'suċċess Fix Windows 10 install Fails With Error C1900101-4000D imma jekk għad għandek xi mistoqsijiet dwar din il-gwida, imbagħad tħossok liberu li tistaqsihom fit-taqsima tal-kumment.