Fix Computer does not start until restarted multiple times
Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.
Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.
Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.
Fix Computer does not start until restarted multiple times
Zorg ervoor dat u een herstelpunt maakt, voor het geval er iets misgaat.
Opmerking: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.
Methode 1: Schakel snel opstarten uit
1.Druk op Windows-toets + R typ vervolgens control en druk op Enter om te openen Control Panel.
2.Klik op Hardware en geluiden klik dan op Energiebeheer.
3.Selecteer vervolgens in het linkerdeelvenster "Kies wat de aan / uit-knoppen doen."
4.Klik nu op “Instellingen wijzigen die momenteel niet beschikbaar zijn."
5.Deselecteer "Schakel snel opstarten in” en klik op Wijzigingen opslaan.
Methode 2: Voer automatische reparatie uit
1.Plaats de opstartbare installatie-dvd van Windows 10 en herstart je pc.
2.When prompted to druk op een willekeurige toets Om op te starten vanaf CD of DVD, drukt u op een willekeurige toets om door te gaan.
3.Selecteer uw taalvoorkeuren en klik op Volgende. Klik op Herstellen uw computer linksonder.
4.Klik bij het kiezen van een optiescherm op Problemen.
5.Klik in het scherm Problemen oplossen op Geavanceerde optie.
6.Klik in het scherm Geavanceerde opties op Automatische reparatie of opstartreparatie.
7.Wacht tot de Windows automatische/opstartreparaties compleet.
8.Herstart en je hebt met succes Fix Computer does not start until restarted multiple times issue, zo niet, ga dan verder.
Lees ook Hoe u dit kunt oplossen Automatische reparatie kan uw pc niet repareren.
Methode 3: BIOS resetten naar standaardinstellingen
1.Zet uw laptop uit, vervolgens aan en tegelijkertijd druk op F2, DEL of F12 (afhankelijk van uw fabrikant) om aan te gaan BIOS-instellingen.
2.Nu moet je de reset-optie vinden om laad de standaardconfiguratie en het kan worden genoemd als Reset to default, Load factory defaults, Clear BIOS settings, Load setup defaults, of iets dergelijks.
3.Selecteer het met uw pijltjestoetsen, druk op Enter en bevestig de bewerking. Uw BIOS zal nu zijn . gebruiken standaard instellingen.
4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.
Method 4: Check if hard disk is failing
In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.
Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.
Methode 5: Controleer de voeding
A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.
If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.
Method 6: Replace CMOS battery
If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.
Methode 7: ATX-resetten
Opmerking: Dit proces is over het algemeen van toepassing op laptops, dus als u een computer heeft, verlaat u deze methode.
1.Power off your laptop then remove the power cord, leave it for few minutes.
2. nu verwijder de batterij van achteren en houd de aan/uit-knop 15-20 seconden ingedrukt.
Opmerking: Sluit het netsnoer nog niet aan, wij vertellen u wanneer u dat wel moet doen.
3.Now plug in uw netsnoer (batterij mag niet geplaatst zijn) en probeer uw laptop op te starten.
4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.
If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.
Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.
Aanbevolen:
Dat heb je met succes Fix Computer does not start until restarted multiple times issue maar als je nog vragen hebt over deze handleiding, stel ze dan gerust in het commentaargedeelte.
