Februar 6, 2018

Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Fix Computer does not start until restarted multiple times

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

Sørg for å opprette et gjenopprettingspunkt, i tilfelle noe går galt.

OBS: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

Metode 1: Slå av rask oppstart

1. Trykk på Windows-tasten + R, skriv deretter kontroll og trykk Enter for å åpne Kontrollpanel.

kontrollpanel

2.Klikk på Maskinvare og lyd Klikk deretter på Strømalternativer.

strømalternativer i kontrollpanelet

3. Fra venstre vindusrute velger du "Velg hva strømknappene gjør."

velg hva strømknappene gjør usb ikke gjenkjent fikse

4. Klikk nå på "Endre innstillinger som for øyeblikket ikke er tilgjengelige."

endre innstillinger som for øyeblikket ikke er tilgjengelige

5. Fjern merket for "Slå på hurtig oppstart" og klikk på Lagre endringer.

Fjern merket for Slå på rask oppstart

Metode 2: Kjør automatisk reparasjon

1.Sett inn den oppstartbare installasjons-DVDen for Windows 10 og start datamaskinen på nytt.

2.When prompted to Trykk en tast for å starte opp fra CD eller DVD, trykk på en tast for å fortsette.

Trykk på en hvilken som helst tast for å starte opp fra CD eller DVD

3.Velg dine språkpreferanser, og klikk på Neste. Klikk på Reparer datamaskinen din nederst til venstre.

Reparer datamaskinen

4. På skjermbildet for valg av alternativ klikker du Feilsøk.

Velg et alternativ ved automatisk oppstartsreparasjon av Windows 10

5. På feilsøkingsskjermen klikker du Avansert alternativ.

velg avansert alternativ fra feilsøkingsskjermen

6. På skjermbildet Avanserte alternativer klikker du Automatisk reparasjon eller oppstartsreparasjon.

kjøre automatisk reparasjon

7.Vent til Windows automatiske/oppstartsreparasjoner fullstendig.

8. Start på nytt og du har lykkes Fix Computer does not start until restarted multiple times issue, hvis ikke, fortsett.

Les også Hvordan fikse Automatic Repair kunne ikke reparere PC-en.

Metode 3: Tilbakestill BIOS til standardinnstillinger

1.Slå av den bærbare datamaskinen og slå den på samtidig trykk F2, DEL eller F12 (avhengig av produsenten) for å inngå BIOS oppsett.

trykk DEL- eller F2-tasten for å gå inn i BIOS-oppsett

2.Now you’ll need to find the reset option to last inn standardkonfigurasjonen og det kan bli navngitt som Tilbakestill til standard, Last inn fabrikkinnstillinger, Slett BIOS-innstillinger, Last inn standardinnstillinger for oppsett eller noe lignende.

last inn standardkonfigurasjonen i BIOS

3.Select it with your arrow keys, press Enter, and confirm the operation. Your BIOS vil nå bruke den standard instillinger.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Sjekk om datamaskinens harddisk er riktig tilkoblet

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

Metode 5: Sjekk strømforsyningen

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

Defekt strømforsyning

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

Metode 7: ATX-tilbakestilling

OBS: Denne prosessen gjelder generelt for bærbare datamaskiner, så hvis du har en datamaskin, la denne metoden være.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2.Nå fjern batteriet bakfra og trykk og hold inne strømknappen i 15-20 sekunder.

koble fra batteriet

OBS: Ikke koble til strømledningen ennå, vi vil fortelle deg når du skal gjøre det.

3.Now plug in strømledningen din (batteri skal ikke settes inn) og prøver å starte opp den bærbare datamaskinen.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

Anbefalt:

Det er det du har lykkes med Fix Computer does not start until restarted multiple times issue men hvis du fortsatt har spørsmål angående denne veiledningen, kan du gjerne spørre dem i kommentarfeltet.