If you are a person who loves to play around with the programs on your phone, you might be aware of the TWRP mount internal storage. This is an official app from the Google Play Store and can help in installing third-party apps and software.
One of the issues with the mode is TWRP internal storage 0MB. Though you might have enough space to flash new files on your phone, you may see this error message pop up on your phone. In this case, you might be unable to mount storage TWRP on your Android phone. There are various reasons for this issue and you might be denied access to the unofficial software files and other custom ROMs. You can use the method in the article to fix TWRP unable to mount storage issue.
How to Fix Unable to Mount Storage TWRP on Android
TWRP Recovery mode is used to install and back up the files on your phone instantly. It is available as an app in the Google Play Store and is a trusted app.
OBS: The steps mentioned correspond to the Samsung Galaxy A21 s model and the settings are bound to differ according to the phone model and manufacturer.
How to Install TWRP Recovery Mode App
Here are the steps to install TWRP recovery mode application.
Se også:
Fix Google Photos not uploading photos on Android
Fix Tinder Matches forsvunnet på Android
10 måter å fikse Spotify kan ikke logge inn på
Fiks Netflix Error 5.7 på Android
Slik vet du om AirPods lader på Android
1. From the menu, open the Play-butikken app.
2. Trykk på søkelinjen øverst på hjemmesiden.
3. Søk etter TWRP recovery mode og trykk på Søk ikonet.
4. Trykk på Install -knappen på Offisiell TWRP-app.
What Causes TWRP Unable to Mount Storage Issue?
The issue of being unable to mount internal storage may be due to the following reasons as below.
- Security Password- The security password or the lock password on your phone may not allow you to mount the storage files.
- Unsupported File is installed- A zip file that is unsupported with your phone model installed on your phone may be a reason for this issue.
- Unable to decrypt files in partition- Your phone may not able to decrypt the files in the Partition drives on your phone.
- Flashing a wrong file in Partition drive- An incorrect or wrong file may be flashed to the Partition drives on your phone.
- Corrupt Files in Partition drive- The files in the partition drives on your Phone may be corrupt or have some malware.
- Factory reset option is corrupt- The issue may occur if the Factory reset option on your phone is corrupt.
Les også: Fix Android begynner å optimalisere app 1 av 1
Following are the troubleshooting methods to fix unable to mound storage TWRP on your Android device.
Method 1: Change Screen Security Password
The simplest approach to fix the unable to mount storage TWRP issue is to change the security password of your phone.
1. From the menu, open the innstillinger app.
2. Trykk på låseskjermen fanen.
3. Trykk på Skjermlåstype fanen.
4. Enter your current password or draw your current pattern on the confirmation screen.
5. Trykk på Passord fanen.
OBS: Alternatively, you can tap on the PIN fanen.
6. Type any alpha-numeric password and tap on the Fortsett alternativet.
7. Type the same alpha-numeric password and tap on the OK alternativet.
Now, check if TWRP internal storage 0mb is resolved.
Method 2: Use Micro SD Card
This method is a little workaround but can be used to fix the issue of TWRP mount internal storage. Using this method, you can move the files of the partition drives to a Micro SD Card on your phone.
1. Trykk lenge på Power -knappen og trykk på strøm av alternativet.
2. trykk Strøm + Volum ned knappene for å starte opp i TWRP-gjenopprettingsmodus.
3. Trykk på Keep Read Only button and swipe the triple arrow icon or the Swipe to Allow Modifications alternativet til høyre.
4. Trykk deretter på Install alternativet i Lag Win Recovery-prosjektet skjermen.
5. Trykk deretter på Velg Lagring fanen.
6. Velg Micro SD-kort option in the menu. Then, check if TWRP unable to mount storage is resolved.
Les også: Hvordan endre IMEI-nummer på Android uten rot
Method 3: Format Data
If you are not able to fix unable to mount storage TWRP issue, you can format the data on your phone in the Team Win Recovery Project mode.
OBS: You can back up the files on your Phone to Google Drive before proceeding with this method to avoid loss of data.
1. Hold Power -knappen og trykk på strøm av alternativet.
2. trykk Strøm + Volum ned knappene for å starte opp i TWRP-gjenopprettingsmodus.
3. Trykk på Keep Read Only button and swipe the triple arrow icon or the Swipe to Allow Modifications alternativet til høyre.
4. Trykk på Tørke alternativet i Lag Win Recovery-prosjektet skjermen.
5. Trykk på Formater data knapp.
6. Type ja i Wipe Format Data screen and tap on the Enter alternativet.
7. Gå tilbake til Lag Win Recovery-prosjektet screen and tap on the Reboot alternativet.
8. Trykk på System option to turn on your phone.
Finally, check if TWRP internal storage 0mb issue is resolved.
Method 4: Format Internal Storage
Another option to fix unable to mount storage TWRP issue is to format the internal storage on your phone.
Step I: Backup Files on Internal Storage
The first step is to back up the files on your Internal Storage partition drive in the twrp recovery mode.
1. trykk Power -knappen og trykk på strøm av alternativet.
2. trykk Strøm + Volum ned knappene for å starte opp i TWRP-gjenopprettingsmodus.
3. Trykk på Keep Read Only button and swipe the triple arrow icon or the Swipe to Allow Modifications alternativet til høyre.
4. Trykk deretter på Backup alternativet i Lag Win Recovery-prosjektet skjermen.
5. Velg Intern lagring alternativet i Velg Lagring screen and tap on the OK knapp.
6. Select all the partitions and swipe the triple arrow icon or the Sveip for å tørke option to the right to confirm the selection.
Step II: Format Internal Storage
The next step is to format the files on the Internal Storage partition drive in the TWRP recovery mode.
1. Åpne Lag Win Recovery-prosjektet app og trykk på Tørke alternativet.
2. Trykk på Avansert tørking alternativet.
3. Velg Intern lagring alternativet i Select Partition to Wipe section and swipe the triple arrow icon or the Sveip for å tørke option to the right to confirm the selection.
Les også: What is HTC S-OFF?
Metode 5: Reparer systemfiler
To fix the unable to mount storage TWRP issue, you can repair the system files on your phone in the TWRP recovery mode.
1. Hold Power -knappen og trykk på strøm av alternativet.
2. Trykk deretter på Strøm + Volum ned knappene for å starte opp i TWRP-gjenopprettingsmodus.
3. Trykk på Keep Read Only button and swipe the triple arrow icon or the Swipe to Allow Modifications alternativet til høyre.
4. Trykk på Tørke alternativet i Lag Win Recovery-prosjektet skjermen.
5. Trykk på Avansert tørking alternativet.
6. Velg Data alternativet i Select Partition to Wipe delen og trykk på Repair or Change File System alternativet.
7. Trykk på Change File System knapp.
8. Trykk på exFAT option and swipe the triple arrow icon or the Swipe to Change option to the right on the screen.
If TWRP mount internal storage issue is still not resolved, you can follow the steps below to repair further files (Optional).
9. Gå tilbake til Repair or Change File System screen and tap on the Change File System alternativet.
10. Velg EXT 2 option in the menu and swipe the triple arrow icon or the Swipe to Change option to the right to confirm the selection.
11. Return to the menu, select the EXT 4 option, and swipe the triple arrow icon or the Swipe to Change option to the right to confirm the selection.
12. Gå tilbake til Lag Win Recovery-prosjektet screen and tap on the Monter alternativet.
13. Velg Data og Micro SD-kort alternativer i Select Partition to Mount section and flash the files.
Method 6: Use ADB Command
The final resort to fix unable to mount storage TWRP issue is to use the ADB or Android Debug Bridge commands on your Windows PC.
Option I: Use Fastboot Command
The first option to fix TWRP internal storage 0mb issue is to use the fastboot command and format data on your phone.
Step I: Enable ADB devices on your PC
As a first step, you have to enable the ADB devices on your Windows PC using the official ADB tool.
1. Bruke en USB-kabel, connect your phone to your Windows PC.
2. Trykk på Windows-tasten, Type Google Chrome, og klikk på Åpen.
3. Åpne Android SDK plattformverktøy nettsted og klikk på Download SDK Platform- Tools for Windows kobling i Nedlastinger seksjon.
4. Using a data compression utility like WinZip, extract all the files of the ADB tool to the Lokal disk (C :) kjøre.
5. trykk Windows-tasten, Type Windows Powershell, klikk deretter på Kjør som Administrator.
6. Skriv inn ./adb-enheter kommandoen og trykk på Skriv inn tasten to check the connected devices.
7. Trykk på Aksepterer alternativet på telefonen.
Les også: Fix System UI har stoppet svart skjerm på Android
Step II: Enable USB Debugging
To enable the USB debugging option, you have to enable the Developer mode on your phone as follows.
1. From the home menu, open the innstillinger app.
2. Tap on the tab Om telefonen.
3. Tap on the tab Programvareinformasjon.
4. Tap on the tab Byggenummer 7 ganger.
5. The message Utviklermodus er aktivert ville bli vist.
6. Gå tilbake til innstillinger main page and tap on the tab Utviklermuligheter.
7. I Debugging seksjon, slå på USB feilsøking alternativet.
8. I Tillate USB-feilsøking? confirmation message, tap on the OK alternativet.
Les også: What is Odin Mode on Samsung Phone?
Step III: Enable Node Tree Debugging
To enable the Windows PC to make changes to the Android phone, you have to enable the additional feature called Node Tree Debugging as follows.
1. Gå tilbake til innstillinger main page and tap on the tab tilgjengelighet.
2. Trykk på Snakke tilbake alternativet.
3. Trykk deretter på innstillinger alternativet.
4. Trykk deretter på Avanserte innstillinger alternativet.
5. Trykk på Utviklerinnstillinger alternativet.
6. Slå på Aktiver feilsøking av nodetre alternativet.
7. I Aktiver Node Tree Debugging? confirmation window, tap on the OK alternativet.
Step IV: Format Data Using Windows PowerShell
The last step to fix the unable to mount storage TWRP issue is to format the data on your phone using the Windows PowerShell app.
1. Trykk på Windows-tasten, Type Windows Powershell, og klikk på Kjør som Administrator.
2. Type the given kommando og trykk på Skriv inn tasten to reboot your phone into TWRP modus.
Adb reboot bootloader
3. Then, type the following kommando og traff Skriv inn tasten to format the user data on your phone.
fastboot format userdata
4. Skriv inn Fastboot reboot kommandoen og trykk på Skriv inn tasten to reboot your phone in Fastboot mode.
Les også: Slik viser du apper på Android
Option II: Flash Recovery File
The second option to fix the issue is to flash the recovery file to your ADB folder on your Windows PC.
Step I: Rename Recovery File in adb Folder
As a first step, you have to rename the recovery file on the adb folder on your Windows PC to fix compatibility issues.
1. Enable ADB devices using your Windows PC.
2. Aktiver USB Debugging og Node Tree Debugging options on your phone.
3. Åpent Filutforsker bruker Windows + E nøkler simultaneously and navigate to the ADB folder using the location path as This PC > Local Disk (C:) > adb.
4. Right-click on the TWRP file and click on the Gi nytt navn alternativet.
5. Type recovery.img og trykk på Skriv inn tasten.
OBS: You have to copy the name of the recovery file on your phone and rename the file accordingly.
Step II: Flash Recovery File
The next step is to flash the recovery file on your phone using the Windows PowerShell app.
1. trykk Shift-tasten, right-click on a space, and click on the Open Windows PowerShell window here alternativet.
2. Skriv inn kommandoen fastboot enheter og traff Skriv inn tasten to check for adb devices in the fastboot mode.
3. Skriv inn kommandoen fastboot recovery.img og trykk på Enter key to flash the recovery file on the fastboot mode on your phone.
Anbefalt:
The methods to fix the issue of being unable to mount storage TWRP are discussed in the article. Please let us know your suggestions and queries on the topic in the comments below for us to heed your doubts.