Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

Onetsetsani kuti mupange malo obwezeretsa, pokhapokha ngati chinachake chalakwika.

Zindikirani: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

Njira 1: Zimitsani Kuyambitsa Mwachangu

1.Press Windows Key + R ndiye lembani ulamuliro ndi kumumenya Enter kuti mutsegule Gawo lowongolera.

2.Pangani pa Chipangizo ndi Zomveka ndiye dinani Zosankha zamagetsi.

3. Kenako pa zenera lakumanzere sankhani "Sankhani zomwe mabatani amapanga."

4. Tsopano dinani "Sinthani zosintha zomwe sizikupezeka panopa."

5. Osayang'ana "Yatsani poyambira” ndi kumadula Save zosintha.

Njira 2: Thamangani Automatic kukonza

1.Insert the Windows 10 bootable installation DVD ndi kukhazikitsanso PC yanu.

2.When prompted to Dinani batani lililonse to boot from CD or DVD, press any key to continue.

3.Sankhani zokonda zanu zachilankhulo, ndikudina Kenako. Dinani Konzani kompyuta yanu pansi kumanzere.

4.On kusankha njira chophimba, dinani Kusokoneza.

5.Pa Troubleshoot screen, dinani MwaukadauloZida njira.

6.Pa Advanced options chophimba, dinani Kukonza Mwadzidzidzi kapena Kukonza Poyambira.

7. Dikirani mpaka Kukonzekera kwa Windows Automatic/Startup maliza.

8.Restart ndipo mwachita bwino Fix Computer does not start until restarted multiple times issue, ngati sichoncho, pitirizani.

Komanso, werengani Momwe mungakonzere Automatic kukonza sikunathe kukonza PC yanu.

Njira 3: Bwezeretsani BIOS kuti ikhale yokhazikika

1.Zimitsani laputopu yanu, ndikuyatsa ndi nthawi imodzi Dinani F2, DEL kapena F12 (kutengera wopanga wanu) kulowa Kupanga BIOS.

2.Now you’ll need to find the reset option to tsegulani kasinthidwe kokhazikika ndipo ikhoza kutchedwa Bwezeretsani kuti ikhale yosasinthika, Lowetsani zosintha zafakitale, Chotsani zoikamo za BIOS, Zosintha za Kukhazikitsa, kapena zina zofananira.

3.Select it with your arrow keys, press Enter, and confirm the operation. Your BIOS adzagwiritsa ntchito zosintha zosasintha.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

Njira 5: Onani Magetsi

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

Njira 7: Kukonzanso kwa ATX

Zindikirani: Izi nthawi zambiri zimagwira ntchito pa laputopu, ngati muli ndi kompyuta, siyani njira iyi.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2.Tsopano chotsani batiri kuchokera kumbuyo ndikusindikiza & kugwira batani lamphamvu kwa masekondi 15-20.

Zindikirani: Osalumikiza chingwe chamagetsi pakadali pano, tikuwuzani nthawi yoti muchite zimenezo.

3.Now plug in chingwe chanu champhamvu (batire siliyenera kuyikidwa) ndikuyesera kuyambitsa laputopu yanu.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

anati:

Ndi zomwe mwachita bwino Fix Computer does not start until restarted multiple times issue koma ngati muli ndi mafunso okhudzana ndi bukhuli ndiye omasuka kuwafunsa mu gawo la ndemanga.