فيبروري 6، 2018

Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Fix Computer does not start until restarted multiple times

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

پڪ ڪريو ته بحال پوائنٽ ٺاهيو، صرف صورت ۾ ڪجهه غلط ٿي وڃي.

نوٽ: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

طريقو 1: فاسٽ شروع ڪرڻ بند ڪريو

1.Press Windows Key + R then type control and hit Enter to open ڪنٽرول پينل.

ڪنٽرول پينل

2.Cick ھارڊويئر ۽ صوتي پوءِ ڪلڪ ڪريو پاور اختيار.

ڪنٽرول پينل ۾ طاقت جا اختيار

3. پوءِ کاٻي ونڊو پين مان چونڊيو "چونڊيو جيڪو طاقت جي بٽڻ چونڊيو."

چونڊيو جيڪو پاور بٽڻ USB کي سڃاڻي نه ٿو درست ڪري

4. ھاڻي ڪلڪ ڪريو "سيٽنگون تبديل ڪريو جيڪي ھن وقت دستياب ناھي."

سيٽنگون تبديل ڪريو جيڪي في الحال دستياب نه آهن

5. نشان هٽايو“روزانو هلائڻ شروع ڪريو"۽ ڪلڪ ڪريو تبديليون محفوظ ڪريو.

ان چيڪ ڪريو ٽرن آن فاسٽ سٹارٽ اپ

طريقو 2: خودڪار مرمت کي هلائڻ

1.داخل ڪريو Windows 10 بوٽبل تنصيب ڊي وي ڊي ۽ پنهنجي پي سي کي ٻيهر شروع ڪريو.

2.When prompted to ڪا به پريس دٻايو سي ڊي يا ڊي وي ڊي مان بوٽ ڪرڻ لاءِ، جاري رکڻ لاءِ ڪي به دٻايو.

سي ڊي يا ڊي وي ڊي کان بوٽ ڪرڻ لاءِ ڪنهن به دٻاءُ کي دٻايو

3. منتخب ڪريو پنھنجي ٻولي ترجيحات، ۽ ڪلڪ ڪريو اڳيون. ڪلڪ ڪريو مرمت توھان جو ڪمپيوٽر ھيٺ کاٻي پاسي ۾.

توھان جي ڪمپيوٽر جي مرمت ڪريو

4. هڪ اختيار چونڊيو اسڪرين تي، ڪلڪ ڪريو مسئلي جو حل.

ونڊوز 10 خودڪار شروعاتي مرمت تي هڪ اختيار چونڊيو

5.Tubleshoot اسڪرين تي، ڪلڪ ڪريو ترقي يافته اختيار.

مسئلو حل ڪرڻ واري اسڪرين مان ترقي يافته اختيار چونڊيو

6. ترقي يافته اختيارن جي اسڪرين تي، ڪلڪ ڪريو خودڪار مرمت يا شروعاتي مرمت.

خودڪار مرمت هلائڻ

7. تائين انتظار ڪريو ونڊوز خودڪار / شروعاتي مرمت مڪمل ڪيو.

8.Restart ۽ توهان ڪاميابي سان ڪيو آهي Fix Computer does not start until restarted multiple times issue, جيڪڏهن نه، جاري رکو.

پڻ پڙهو خودڪار مرمت کي ڪيئن ٺيڪ ڪجي توهان جي PC جي مرمت نه ٿي سگهي.

طريقو 3: BIOS کي ڊفالٽ سيٽنگون ري سيٽ ڪريو

1. پنھنجي ليپ ٽاپ کي بند ڪريو، پوءِ ان کي آن ڪريو ۽ ان سان گڏ پريس ڪريو F2، DEL يا F12 (توهان جي ٺاهيندڙ تي منحصر آهي) داخل ٿيڻ لاء BIOS سيٽ اپ.

BIOS سيٽ اپ داخل ڪرڻ لاءِ DEL يا F2 کي دٻايو

2.Now you’ll need to find the reset option to ڊفالٽ ٺاھ جوڙ لوڊ ڪريو ۽ ان جو نالو رکي سگھجي ٿو ري سيٽ کي ڊفالٽ، لوڊ فيڪٽري ڊفالٽ، صاف BIOS سيٽنگون، لوڊ سيٽ اپ ڊفالٽ، يا ڪجھ ساڳيو.

BIOS ۾ ڊفالٽ ٺاھ جوڙ لوڊ ڪريو

3.Select it with your arrow keys, press Enter, and confirm the operation. Your BIOS هاڻي ان کي استعمال ڪندو رٿيل سيٽنگون.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

چيڪ ڪريو ته ڪمپيوٽر جي هارڊ ڊسڪ صحيح طرح سان ڳنڍيل آهي

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

طريقو 5: پاور سپلائي چيڪ ڪريو

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

ناقص بجلي جي فراهمي

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

طريقو 7: ATX ريٽنگ

نوٽ: اهو عمل عام طور تي ليپ ٽاپ تي لاڳو ٿئي ٿو، تنهنڪري جيڪڏهن توهان وٽ ڪمپيوٽر آهي ته پوء هن طريقي کي ڇڏي ڏيو.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2. هاڻي بيٽ هٽايو پوئتي کان ۽ 15-20 سيڪنڊن لاء پاور بٽڻ کي دٻايو ۽ دٻايو.

توهان جي بيٽري unplug

نوٽ: بجلي جي تار کي اڃا تائين ڳنڍيو نه، اسان توهان کي ٻڌائينداسين ته اهو ڪڏهن ڪرڻو آهي.

3.Now plug in توهان جي طاقت جي تار (بيٽري داخل نه ٿيڻ گهرجي) ۽ توهان جي ليپ ٽاپ کي بوٽ ڪرڻ جي ڪوشش ڪري رهيا آهيو.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

صلاح ڏني ته:

اهو توهان کي ڪاميابي سان آهي Fix Computer does not start until restarted multiple times issue پر جيڪڏھن توھان اڃا تائين ھن ھدايت جي حوالي سان ڪي سوال آھن، انھن کان پڇڻ لاء آزاد محسوس ڪريو تبصري جي سيڪشن ۾.