If you are a person who loves to play around with the programs on your phone, you might be aware of the TWRP mount internal storage. This is an official app from the Google Play Store and can help in installing third-party apps and software.
One of the issues with the mode is TWRP internal storage 0MB. Though you might have enough space to flash new files on your phone, you may see this error message pop up on your phone. In this case, you might be unable to mount storage TWRP on your Android phone. There are various reasons for this issue and you might be denied access to the unofficial software files and other custom ROMs. You can use the method in the article to fix TWRP unable to mount storage issue.
How to Fix Unable to Mount Storage TWRP on Android
TWRP Recovery mode is used to install and back up the files on your phone instantly. It is available as an app in the Google Play Store and is a trusted app.
نوٽ: The steps mentioned correspond to the Samsung Galaxy A21 s model and the settings are bound to differ according to the phone model and manufacturer.
How to Install TWRP Recovery Mode App
Here are the steps to install TWRP recovery mode application.
پڻ ڏسندا
Fix Google Photos not uploading photos on Android
Android تي غائب ٿيل Tinder ميچ کي درست ڪريو
Spotify کي درست ڪرڻ جا 10 طريقا لاگ ان ٿيڻ ۾ ناڪامي غلطي
Android تي Netflix غلطي 5.7 کي درست ڪريو
ڪيئن معلوم ڪجي ته AirPods Android تي چارج ڪري رهيا آهن
1. From the menu, open the پلي اسٽور ايپ.
2. تي تي ٽيپ ڪريو ڳولها بار گھر جي صفحي جي چوٽي تي.
3. ڳولھيو TWRP recovery mode ۽ تي ٽيپ ڪريو ڳولا icon.
4. تي تي ٽيپ ڪريو انسٽال ڪريو جو بٽڻ سرڪاري TWRP ايپ.
What Causes TWRP Unable to Mount Storage Issue?
The issue of being unable to mount internal storage may be due to the following reasons as below.
- Security Password- The security password or the lock password on your phone may not allow you to mount the storage files.
- Unsupported File is installed- A zip file that is unsupported with your phone model installed on your phone may be a reason for this issue.
- Unable to decrypt files in partition- Your phone may not able to decrypt the files in the Partition drives on your phone.
- Flashing a wrong file in Partition drive- An incorrect or wrong file may be flashed to the Partition drives on your phone.
- Corrupt Files in Partition drive- The files in the partition drives on your Phone may be corrupt or have some malware.
- Factory reset option is corrupt- The issue may occur if the Factory reset option on your phone is corrupt.
پڻ پڙهو Fix Android is Starting Optimizing App 1 of 1
Following are the troubleshooting methods to fix unable to mound storage TWRP on your Android device.
Method 1: Change Screen Security Password
The simplest approach to fix the unable to mount storage TWRP issue is to change the security password of your phone.
1. From the menu, open the جوڙ ايپ.
2. تي تي ٽيپ ڪريو اسڪرين کي لاڪ ڪيو ٽيب.
3. تي تي ٽيپ ڪريو Screen lock type ٽيب.
4. Enter your current password or draw your current pattern on the confirmation screen.
5. تي تي ٽيپ ڪريو پاسورڊ ٽيب.
نوٽ: متبادل طور تي، توھان تي ٽيپ ڪري سگھو ٿا پن ٽيب.
6. Type any alpha-numeric password and tap on the جاري رکو اختيار.
7. Type the same alpha-numeric password and tap on the OK اختيار.
Now, check if TWRP internal storage 0mb is resolved.
Method 2: Use Micro SD Card
This method is a little workaround but can be used to fix the issue of TWRP mount internal storage. Using this method, you can move the files of the partition drives to a Micro SD Card on your phone.
1. ڊگهي دٻاءُ بجلي button and tap on the پاور بند اختيار.
2. پريس ڪريو پاور + حجم ھيٺ buttons to boot into the TWRP Recovery mode.
3. تي تي ٽيپ ڪريو Keep Read Only button and swipe the triple arrow icon or the Swipe to Allow Modifications ساڄي طرف اختيار.
4. اڳيون، تي ٽيپ ڪريو انسٽال ڪريو اختيار ۾ داخل ٿيو ٽيم جي بحالي واري منصوبي اسڪرين.
5. پوء، تي ٽيپ ڪريو منتخب ڪريو اسٽوريج ٽيب.
6. منتخب ڪريو مائڪرو ايس ايس ڪارڊ option in the menu. Then, check if TWRP unable to mount storage is resolved.
پڻ پڙهو ڪيئن روٽ کان سواء Android تي IMEI نمبر تبديل ڪرڻ لاء
Method 3: Format Data
If you are not able to fix unable to mount storage TWRP issue, you can format the data on your phone in the Team Win Recovery Project mode.
نوٽ: You can back up the files on your Phone to Google Drive before proceeding with this method to avoid loss of data.
1. رکو بجلي button and tap on the پاور بند اختيار.
2. پريس ڪريو پاور + حجم هيٺ buttons to boot into the TWRP Recovery mode.
3. تي تي ٽيپ ڪريو Keep Read Only button and swipe the triple arrow icon or the Swipe to Allow Modifications ساڄي طرف اختيار.
4. تي تي ٽيپ ڪريو وائپ ڪريو اختيار ۾ داخل ٿيو ٽيم جي بحالي واري منصوبي اسڪرين.
5. تي تي ٽيپ ڪريو فارمٽ ڊيٽا بٽڻ
6. قسم ها ۾ Wipe Format Data screen and tap on the شامل ڪريو اختيار.
7. ڏانھن واپس وو ٽيم جي بحالي واري منصوبي screen and tap on the ربوٽ اختيار.
8. تي تي ٽيپ ڪريو منڊل option to turn on your phone.
Finally, check if TWRP internal storage 0mb issue is resolved.
Method 4: Format Internal Storage
Another option to fix unable to mount storage TWRP issue is to format the internal storage on your phone.
Step I: Backup Files on Internal Storage
The first step is to back up the files on your Internal Storage partition drive in the twrp recovery mode.
1. پريس ڪريو بجلي button and tap on the پاور بند اختيار.
2. پريس ڪريو پاور + حجم ھيٺ buttons to boot into the TWRP Recovery mode.
3. تي تي ٽيپ ڪريو Keep Read Only button and swipe the triple arrow icon or the Swipe to Allow Modifications ساڄي طرف اختيار.
4. پوء، تي ٽيپ ڪريو بيڪ اپ اختيار ۾ داخل ٿيو ٽيم جي بحالي واري منصوبي اسڪرين.
5. منتخب ڪريو اندروني اسٽوريج اختيار ۾ داخل ٿيو منتخب ڪريو اسٽوريج screen and tap on the OK بٽڻ
6. Select all the partitions and swipe the triple arrow icon or the صاف ڪرڻ لاءِ سوائپ ڪريو option to the right to confirm the selection.
Step II: Format Internal Storage
The next step is to format the files on the Internal Storage partition drive in the TWRP recovery mode.
1. کليل ٽيم جي بحالي واري منصوبي ايپ ۽ تي ٽيپ ڪريو وائپ ڪريو اختيار.
2. تي تي ٽيپ ڪريو ڳوڙھي وائپ اختيار.
3. منتخب ڪريو اندروني اسٽوريج اختيار ۾ داخل ٿيو Select Partition to Wipe section and swipe the triple arrow icon or the صاف ڪرڻ لاءِ سوائپ ڪريو option to the right to confirm the selection.
پڻ پڙهو HTC S-OFF ڇا آهي؟
طريقو 5: سسٽم فائلن جي مرمت ڪريو
To fix the unable to mount storage TWRP issue, you can repair the system files on your phone in the TWRP recovery mode.
1. رکو بجلي button and tap on the پاور بند اختيار.
2. Then, press the پاور + حجم ھيٺ buttons to boot into the TWRP Recovery mode.
3. تي تي ٽيپ ڪريو Keep Read Only button and swipe the triple arrow icon or the Swipe to Allow Modifications ساڄي طرف اختيار.
4. تي تي ٽيپ ڪريو وائپ ڪريو اختيار ۾ داخل ٿيو ٽيم جي بحالي واري منصوبي اسڪرين.
5. تي تي ٽيپ ڪريو ڳوڙھي وائپ اختيار.
6. منتخب ڪريو ڊيٽا اختيار ۾ داخل ٿيو Select Partition to Wipe سيڪشن ۽ تي ٽيپ ڪريو Repair or Change File System اختيار.
7. تي تي ٽيپ ڪريو Change File System بٽڻ
8. تي تي ٽيپ ڪريو exFAT option and swipe the triple arrow icon or the Swipe to Change option to the right on the screen.
If TWRP mount internal storage issue is still not resolved, you can follow the steps below to repair further files (Optional).
9. ڏانھن واپس وو Repair or Change File System screen and tap on the Change File System اختيار.
10. منتخب ڪريو EXT 2 option in the menu and swipe the triple arrow icon or the Swipe to Change option to the right to confirm the selection.
11. Return to the menu, select the EXT 4 option, and swipe the triple arrow icon or the Swipe to Change option to the right to confirm the selection.
12. ڏانھن واپس وو ٽيم جي بحالي واري منصوبي screen and tap on the (جبل) اختيار.
13. منتخب ڪريو ڊيٽا ۽ مائڪرو ايس ايس ڪارڊ آپشن ۾ Select Partition to Mount section and flash the files.
Method 6: Use ADB Command
The final resort to fix unable to mount storage TWRP issue is to use the ADB or Android Debug Bridge commands on your Windows PC.
Option I: Use Fastboot Command
The first option to fix TWRP internal storage 0mb issue is to use the fastboot command and format data on your phone.
Step I: Enable ADB devices on your PC
As a first step, you have to enable the ADB devices on your Windows PC using the official ADB tool.
1. استعمال ڪندي نيٽ ورڪ ڪيبل, connect your phone to your Windows PC.
2. مارو Windows key، قسم گوگل ڪروم، ۽ ڪلڪ ڪريو کوليو.
3. کليل Android SDK پليٽ ٽولبار ويب سائيٽ ۽ تي ڪلڪ ڪريو Download SDK Platform- Tools for Windows ۾ لنڪ ڊائون لوڊ سيڪشن.
4. Using a data compression utility like WinZip, extract all the files of the ADB tool to the مقامي ڊسڪ (سي :) هلائڻ
5. پريس ڪريو Windows key، قسم Windows PowerShell، پوء ڪلڪ ڪريو انتظامي طور تي هلائيندڙ.
6. ٽائپ ڪريو ./adb ڊوائيسز حڪم ڪريو ۽ دٻايو ڪيٻو داخل ڪريو to check the connected devices.
7. تي تي ٽيپ ڪريو قبول توهان جي فون تي اختيار.
پڻ پڙهو فڪس سسٽم UI کي Android تي بليڪ اسڪرين بند ڪري ڇڏيو آهي
Step II: Enable USB Debugging
To enable the USB debugging option, you have to enable the Developer mode on your phone as follows.
1. From the home menu, open the جوڙ ايپ.
2. Tap on the tab فون بابت.
3. Tap on the tab سافٽ ويئر جي Informationاڻ.
4. Tap on the tab تعمير نمبر 7 ڀيرا
5. The message ڊولپر موڊ کي فعال ڪيو ويو آهي would be displayed.
6. ڏانھن واپس وو جوڙ main page and tap on the tab ٺاهيندڙ اختيارن.
7. ۾ ڊيبنگ section, toggle on the USB ڊيبنگ اختيار.
8. ۾ USB ڊيبنگنگ جي اجازت ڏيو؟ confirmation message, tap on the OK اختيار.
پڻ پڙهو What is Odin Mode on Samsung Phone?
Step III: Enable Node Tree Debugging
To enable the Windows PC to make changes to the Android phone, you have to enable the additional feature called Node Tree Debugging as follows.
1. ڏانھن واپس وو جوڙ main page and tap on the tab پهچ.
2. تي تي ٽيپ ڪريو TalkBack اختيار.
3. پوء، تي ٽيپ ڪريو جوڙ اختيار.
4. اڳيون، تي ٽيپ ڪريو اعلي جوڙجڪ اختيار.
5. تي تي ٽيپ ڪريو ڊولپر سيٽنگون اختيار.
6. تي ٽوگل ڪريو نوڊ ٽري ڊيبگنگ کي فعال ڪريو اختيار.
7. ۾ نوڊ ٽري ڊيبگنگ کي فعال ڪريو؟ confirmation window, tap on the OK اختيار.
Step IV: Format Data Using Windows PowerShell
The last step to fix the unable to mount storage TWRP issue is to format the data on your phone using the Windows PowerShell app.
1. مارو Windows key، قسم Windows PowerShell، ۽ ڪلڪ ڪريو انتظامي طور تي هلائيندڙ.
2. ڏنل ٽائيپ ڪريو حڪم ۽ پريس ڪريو ڪيٻو داخل ڪريو to reboot your phone into ٽي وي موڊ
ايڊب بوٽو بوٽ ربوٽ ڪريو
3. پوء، ھيٺ ڏنل ٽائيپ ڪريو حڪم ۽ اچي ويو ڪيٻو داخل ڪريو to format the user data on your phone.
فاسٽ بوٽ فارميٽ يوزر ڊيٽا
4. ٽائپ ڪريو فريبو بوٽ ٻيهر ربوٽ حڪم ڪريو ۽ دٻايو ڪيٻو داخل ڪريو to reboot your phone in Fastboot mode.
پڻ پڙهو Android تي ائپس کي ڪيئن لڪايو
Option II: Flash Recovery File
The second option to fix the issue is to flash the recovery file to your ADB folder on your Windows PC.
Step I: Rename Recovery File in adb Folder
As a first step, you have to rename the recovery file on the adb folder on your Windows PC to fix compatibility issues.
1. Enable ADB devices using your Windows PC.
2. کي فعال ڪريو USB ڊيبنگ ۽ Node Tree Debugging options on your phone.
3. کوليو فائل ايڪسپلورر استعمال ڪيو Windows + اي ڪنجيون simultaneously and navigate to the مشھور folder using the location path as This PC > Local Disk (C:) > adb.
4. Right-click on the TWRP file and click on the مٽايو اختيار.
5. قسم بحالي ۽ پريس ڪريو ڪيٻو داخل ڪريو.
نوٽ: You have to copy the name of the recovery file on your phone and rename the file accordingly.
Step II: Flash Recovery File
The next step is to flash the recovery file on your phone using the Windows PowerShell app.
1. پريس ڪريو شفٽ کيڏڻ, right-click on a space, and click on the Open Windows PowerShell window here اختيار.
2. ٽائيپ ڪريو حڪم فاسٽ بوٽ ڊوائيسز ۽ اچي ويو ڪيٻو داخل ڪريو to check for adb devices in the fastboot mode.
3. ٽائيپ ڪريو حڪم fastboot recovery.img ۽ پريس ڪريو شامل ڪريو key to flash the recovery file on the fastboot mode on your phone.
صلاح ڏني ته:
The methods to fix the issue of being unable to mount storage TWRP are discussed in the article. Please let us know your suggestions and queries on the topic in the comments below for us to heed your doubts.