Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.

Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.

Depending on your PC you may receive one of the following errors:

• THREAD_STUCK_IN_DEVICE_DRIVER
• STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
• The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.

Few of the cause which can lead to Thread Stuck In Device Driver error are:

• Corrupt or old device drivers
• نئين هارڊويئر انسٽال ڪرڻ کانپوءِ ڊرائيور تڪرار.
• Error 0xEA blue screen caused by a damaged video card.
• Old BIOS
• Bad Memory

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

تنهن ڪري بغير ڪنهن وقت ضايع ڪرڻ جي اچو ته ڏسو ته ڪيئن ڪجي Fix Thread Stuck In Device Driver Error in Windows 10 هيٺ ڏنل فهرستن جي مدد سان مسئلو حل ڪرڻ واري گائيڊ.

طريقو 1: گرافڪ ڪارڊ ڊرائيورز کي اپڊيٽ ڪريو

If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

طريقو 2: هارڊويئر جي رفتار کي بند ڪريو

1. کولڻ لاءِ Windows Key + I کي دٻايو جوڙ پوءِ ڪلڪ ڪريو سسٽم. 

2. From the left-hand side menu, select ظاهر ڪريو. Now at the bottom of the Display window, click on the Advanced display settings.

3. ھاڻي ڏانھن وڃو the Troubleshoot tab ۽ ڪلڪ ڪريو سيٽنگون تبديل ڪريو.

4. ڇڪيو Hardware Acceleration slider ڪنهن کي به

5. Click Ok then Apply and restart your PC.

6. If you don’t have the troubleshoot tab then right-click on the desktop and select NVIDIA سنڀالڻ وارو پينل (Every graphic card has their own control panel).

7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.

8. Next, under select, a PhysX processor make sure the CPU is selected.

9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.

10. پنھنجي پي سي کي ريبوٽ ڪريو ۽ ڏسو ته توھان ڪري سگھوٿا fix thread stuck in device driver error in Windows 10, if not, continue.

Method 3: Run SFC and DISM tool

1. پريس ڪريو Windows Key + X پوءِ ڪلڪ ڪريو ڪمانڊ پرامپٽ (ايڊمنٽ).

2. ھاڻي ھيٺ ڏنل cmd ۾ ٽائيپ ڪريو ۽ انٽر کي دٻايو.

ايس سي سي / اسڪانو

3. مٿي ڏنل عمل کي ختم ڪرڻ لاء انتظار ڪريو ۽ هڪ دفعو ٿي چڪو آهي توهان جي PC کي ٻيهر شروع ڪريو.

4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.

5. ٻيهر cmd کوليو ۽ هيٺ ڏنل ڪمانڊ ٽائپ ڪريو ۽ هر هڪ کان پوءِ انٽر کي دٻايو.

Dism/آن لائن/Cleanup-Image/CheckHealth Dism/Online/Cleanup-Image/ScanHealth Dism/Online/Cleanup-Image/RestoreHealth

6. DISM حڪم کي هلائڻ ڏيو ۽ ان جي ختم ٿيڻ جو انتظار ڪريو.

7.  If the above command doesn’t work then try on the below:

Dism/Image:C:offline/Cleanup-Image/RestoreHealth/Source:c:testmountwindows Dism/آن لائن/Cleanup-Image/RestoreHealth/ذريعو:c:testmountwindows/LimitAccess

نوٽ: C:RepairSourceWindows کي تبديل ڪريو پنھنجي مرمت جي ماخذ جي جڳھ سان (ونڊوز تنصيب يا بحالي ڊسڪ).

7. تبديلين کي بچائڻ لاءِ پنھنجي پي سي کي ريبوٽ ڪريو.

Method 4: Perform Windows update

Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.

1. پريس ونڊوز ڪي + سيٽنگون کولڻ لاءِ پوءِ ڪلڪ ڪريو تازه ڪاري ۽ سيڪيورٽي.

2. کاٻي پاسي کان، مينيو تي ڪلڪ ڪريو ونڊوز تازه ڪاري.

3. ھاڻي ڪلڪ ڪريو "خبرن جي جانچ"بٽڻ ڪنهن به دستياب اپڊيٽ جي جانچ ڪرڻ لاء.

4. جيڪڏهن ڪا تازه ڪاري باقي رهي ته پوءِ ڪلڪ ڪريو اپڊيٽ ڊائون لوڊ ۽ انسٽال ڪريو.

5. هڪ دفعو اپڊيٽ ڊائون لوڊ ٿي ويا آهن، انهن کي انسٽال ڪريو ۽ توهان جي ونڊوز تازه ڪاري ٿي ويندي.

6. اپڊيٽس انسٽال ٿيڻ کان پوءِ تبديلين کي بچائڻ لاءِ پنھنجي پي سي کي ريبوٽ ڪريو.

Method 5: Run Windows 10 BSOD Troubleshooter

If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).

1. Press Windows key + I to open Settings then click on ‘تازه ڪاري ۽ سيڪيورٽي'

2. From the left pane, select ‘مسئلي جو حل'

3. ھيٺ لٿوڳوليو ۽ ٻيا مسئلا حل ڪريو' سيڪشن.

4. ڪلڪ ڪريو 'نيري اسڪرين'۽ ڪلڪ ڪريو'مسئلي جو حل ڪريو'

Method 6: Give Graphics Card Access to the Application

1. سيٽنگ کولڻ لاءِ Windows Key + I کي دٻايو پوءِ ڪلڪ ڪريو سسٽم.

2. کاٻي هٿ واري مينيو مان چونڊيو ظاهر ڪريو پوءِ ڪلڪ ڪريو Graphics settings link تري ۾.

3. Select the type of app, if you can’t find your app or game in the list then select the ڪلاسڪ ايپ and then use the “برائوز"اختيار.

4. Navigate to your application or game، ان کي چونڊيو ، ۽ ڪلڪ ڪريو کليل.

5. Once the app is added to the list, click on it then again click on Options.

6. منتخب ڪريو "اعلي ڪارڪردگي” and click on Save.

7. تبديلين کي بچائڻ لاءِ پنھنجي پي سي کي ريبوٽ ڪريو.

Method 7: Update BIOS (Basic Input/Output System)

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.

Method 8: Reset Overclocking Settings

If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.

Method 9: Faulty GPU

Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.

طريقو 10: پاور سپلائي چيڪ ڪريو

A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

اهو توهان کي ڪاميابي سان آهي Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.