Thread Stuck In Device Driver Error in Windows 10 [SOLVED]
Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.
Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.
Depending on your PC you may receive one of the following errors:
- THREAD_STUCK_IN_DEVICE_DRIVER
- STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
- The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.
Few of the cause which can lead to Thread Stuck In Device Driver error are:
- Corrupt or old device drivers
- නව දෘඩාංග ස්ථාපනය කිරීමෙන් පසු රියදුරු ගැටුම.
- Error 0xEA blue screen caused by a damaged video card.
- Old BIOS
- Bad Memory
Thread Stuck In Device Driver Error in Windows 10 [SOLVED]
ඉතින් අපි කාලය නාස්ති නොකර බලමු කොහොමද කරන්නේ කියලා Fix Thread Stuck In Device Driver Error in Windows 10 පහත ලැයිස්තුගත දෝශ නිරාකරණ මාර්ගෝපදේශයේ සහාය ඇතිව.
ක්රමය 1: Graphic Card Drivers යාවත්කාලීන කරන්න
If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.
ක්රමය 2: දෘඪාංග ත්වරණය අක්රීය කරන්න
1. විවෘත කිරීමට Windows Key + I ඔබන්න සැකසුම් ඉන්පසු ක්ලික් කරන්න පද්ධතිය.
2. From the left-hand side menu, select ප්රදර්ශනය. Now at the bottom of the Display window, click on the Advanced display settings.
3. දැන් යන්න the Troubleshoot tab ක්ලික් කරන්න සැකසුම් වෙනස් කරන්න.
4. ඇදගෙන යන්න Hardware Acceleration slider කිසිවකට නැත
5. Click Ok then Apply and restart your PC.
6. If you don’t have the troubleshoot tab then right-click on the desktop and select NVIDIA පාලක පැනලය (Every graphic card has their own control panel).
7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.
8. Next, under select, a PhysX processor make sure the CPU is selected.
9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.
10. ඔබේ පරිගණකය නැවත ආරම්භ කර ඔබට හැකි දැයි බලන්න fix thread stuck in device driver error in Windows 10, if not, continue.
Method 3: Run SFC and DISM tool
1. Windows Key + X ඔබන්න ඉන්පසු ක්ලික් කරන්න විධාන විමසුම (පරිපාලක).
2. දැන් cmd එකේ පහත දේ ටයිප් කර enter ඔබන්න:
Sfc / scannow
3. ඉහත ක්රියාවලිය අවසන් වන තෙක් රැඳී සිටින්න සහ අවසන් වූ පසු ඔබේ පරිගණකය නැවත ආරම්භ කරන්න.
4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.
5. නැවතත් cmd විවෘත කර පහත විධානය ටයිප් කර එක් එක් එකට පසුව enter ඔබන්න:
ඩිස්ම් / ඔන්ලයින් / ක්ලීනප්-ඉමේජ් / චෙක්හෙල්ත් ඩිස්ම් / ඔන්ලයින් / ක්ලීනප්-ඉමේජ් / ස්කෑන් හෙල්ත් ඩිස්ම් / ඔන්ලයින් / ක්ලීනප්-ඉමේජ් / රෙස්ටෝර් හෙල්ත්
6. DISM විධානය ක්රියාත්මක කර එය අවසන් වන තෙක් රැඳී සිටින්න.
7. If the above command doesn’t work then try on the below:
Dism /Image:C:offline /Cleanup-Image /RestoreHealth /මූලාශ්රය:c:testmountwindows Dism /Online /Cleanup-Image /RestoreHealth /මූලාශ්රය:c:testmountwindows /LimitAccess
සටහන: C:RepairSourceWindows ඔබේ අළුත්වැඩියා ප්රභවයේ ස්ථානය සමඟ ප්රතිස්ථාපනය කරන්න (Windows ස්ථාපනය හෝ ප්රතිසාධන තැටිය).
7. වෙනස්කම් සුරැකීමට ඔබේ පරිගණකය නැවත ආරම්භ කරන්න.
Method 4: Perform Windows update
Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.
1. මුද්රණය කරන්න වින්ඩෝස් යතුර + මම සැකසීම් විවෘත කිරීමට පසුව ක්ලික් කරන්න යාවත්කාලීන කිරීම සහ ආරක්ෂාව.
2. වම් පස සිට, මෙනුව මත ක්ලික් කරන්න වින්ඩෝස් යාවත්කාලීන කිරීම.
3. දැන් ක්ලික් කරන්න "යාවත්කාල කිරීම් සඳහා පරීක්ෂා කරන්නලබා ගත හැකි යාවත්කාලීනයන් පරීක්ෂා කිරීමට ” බොත්තම.
4. යාවත්කාල කිරීම් පොරොත්තුවේ නම් ක්ලික් කරන්න යාවත්කාලීන බාගත කර ස්ථාපනය කරන්න.
5. යාවත්කාලීනයන් බාගත කළ පසු, ඒවා ස්ථාපනය කර ඔබගේ වින්ඩෝස් යාවත්කාලීන වේ.
6. යාවත්කාලීනයන් ස්ථාපනය කිරීමෙන් පසු වෙනස්කම් සුරැකීමට ඔබේ පරිගණකය නැවත ආරම්භ කරන්න.
Method 5: Run Windows 10 BSOD Troubleshooter
If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).
1. Press Windows key + I to open Settings then click on ‘යාවත්කාලීන කිරීම සහ ආරක්ෂාව'.
2. From the left pane, select ‘දෝෂයකි'.
3. පහළට අනුචලනය කරන්නවෙනත් ගැටළු සොයාගෙන විසඳන්න' කොටස්.
4. 'මත ක්ලික් කරන්නනිල් තිරය' සහ ' මත ක්ලික් කරන්නදොස්හාරකය ක්රියාත්මක කරන්න'.
Method 6: Give Graphics Card Access to the Application
1. Settings විවෘත කිරීමට Windows Key + I ඔබා ඉන්පසු ක්ලික් කරන්න පද්ධතිය.
2. වම් පස මෙනුවෙන් තෝරන්න ප්රදර්ශනය ඉන්පසු ක්ලික් කරන්න Graphics settings link පතුලේ.
3. Select the type of app, if you can’t find your app or game in the list then select the සම්භාව්ය යෙදුම and then use the “ගවේශක" විකල්පය.
4. Navigate to your application or game, එය තෝරා ක්ලික් කරන්න විවෘත.
5. Once the app is added to the list, click on it then again click on විකල්ප.
6. තෝරන්න "ඉහළ කාර්ය සාධනය” and click on Save.
7. වෙනස්කම් සුරැකීමට ඔබේ පරිගණකය නැවත ආරම්භ කරන්න.
Method 7: Update BIOS (Basic Input/Output System)
සටහන
Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, expert supervision is recommended.
BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.
Method 8: Reset Overclocking Settings
If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.
Method 9: Faulty GPU
Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your දක්වන GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.
ක්රමය 10: බල සැපයුම පරීක්ෂා කරන්න
A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.
If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.
ඔබට සාර්ථක වී ඇත්තේ එයයි Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.