Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.

Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.

Depending on your PC you may receive one of the following errors:

• THREAD_STUCK_IN_DEVICE_DRIVER
• STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
• The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.

Few of the cause which can lead to Thread Stuck In Device Driver error are:

• Corrupt or old device drivers
• Vozniški spor po namestitvi nove strojne opreme.
• Error 0xEA blue screen caused by a damaged video card.
• Old BIOS
• Bad Memory

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Torej, ne da bi izgubljali čas, poglejmo Kako Fix Thread Stuck In Device Driver Error in Windows 10 s pomočjo spodaj navedenega vodnika za odpravljanje težav.

1. način: Posodobite gonilnike grafične kartice

If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

2. način: onemogočite strojno pospeševanje

1. Pritisnite tipko Windows + I, da odprete Nastavitve nato kliknite na Sistem. 

2. From the left-hand side menu, select zaslon. Now at the bottom of the Display window, click on the Napredne nastavitve zaslona.

3. Pojdi zdaj the Troubleshoot tab in kliknite Spremenite nastavitve.

4. Povlecite Hardware Acceleration slider do Nobenega

5. Click Ok then Apply and restart your PC.

6. If you don’t have the troubleshoot tab then right-click on the desktop and select Nadzorna plošča NVIDIA (Every graphic card has their own control panel).

7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.

8. Next, under select, a PhysX processor make sure the CPU is selected.

9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.

10. Ponovno zaženite računalnik in preverite, ali lahko fix thread stuck in device driver error in Windows 10, if not, continue.

Method 3: Run SFC and DISM tool

1. Pritisnite tipko Windows + X in kliknite na Ukazni poziv (skrbnik).

2. Sedaj vnesite naslednje v cmd in pritisnite enter:

Sfc / scannow

3. Počakajte, da se zgornji postopek konča, in ko je končan, znova zaženite računalnik.

4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.

5. Znova odprite cmd in vnesite naslednji ukaz ter za vsakim pritisnite enter:

Dism /Online /Cleanup-Image /CheckHealth Dism /Online /Cleanup-Image /ScanHealth Dism /Online /Cleanup-Image /RestoreHealth

6. Pustite, da se zažene ukaz DISM, in počakajte, da se konča.

7.  If the above command doesn’t work then try on the below:

Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows Dism /Online /Cleanup-Image /RestoreHealth /Source:c:testmountwindows /LimitAccess

Opomba: Zamenjajte C:RepairSourceWindows z lokacijo vašega vira popravila (namestitveni ali obnovitveni disk sistema Windows).

7. Znova zaženite računalnik, da shranite spremembe.

Method 4: Perform Windows update

Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.

1. Pritisnite Tipka Windows + Odprem nastavitve in nato kliknem Posodobitve in varnost.

2. From the left-hand side, menu click on Windows Update.

3. Zdaj kliknite »Preveri za posodobitve«, da preverite, ali so na voljo posodobitve.

4. If any updates are pending then click on Prenesite in namestite posodobitve.

5. Once the updates are downloaded, install them and your Windows will become up-to-date.

6. After the updates are installed reboot your PC to save changes.

Method 5: Run Windows 10 BSOD Troubleshooter

If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).

1. Press Windows key + I to open Settings then click on ‘Posodobitve in varnost".

2. From the left pane, select ‘Odpravljanje težav".

3. Pomaknite se navzdol do 'Poiščite in odpravite druge težave' razdelke.

4. Kliknite na 'Modri ​​zaslon' in kliknite na 'Zaženite orodje za odpravljanje težav".

Method 6: Give Graphics Card Access to the Application

1. Pritisnite tipko Windows + I, da odprete nastavitve, nato kliknite Sistem.

2. V levem meniju izberite zaslon nato kliknite na Graphics settings link na dnu.

3. Select the type of app, if you can’t find your app or game in the list then select the Klasična aplikacija and then use the “Brskanje"Možnost.

4. Navigate to your application or game, izberite in kliknite Odprto.

5. Once the app is added to the list, click on it then again click on Možnosti.

6. Izberite »Visoka zmogljivost” and click on Save.

7. Znova zaženite računalnik, da shranite spremembe.

7. način: Posodobite BIOS (osnovni vhodno/izhodni sistem)

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.

Method 8: Reset Overclocking Settings

If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.

Method 9: Faulty GPU

Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.

10. način: Preverite napajanje

A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

To je to, kar imate uspešno Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.