Thread Stuck In Device Driver Error in Windows 10 [SOLVED]
Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.
Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.
Depending on your PC you may receive one of the following errors:
- THREAD_STUCK_IN_DEVICE_DRIVER
- STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
- The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.
Few of the cause which can lead to Thread Stuck In Device Driver error are:
- Corrupt or old device drivers
- Kunetsana kwemutyairi mushure mekuisa Hardware nyowani.
- Error 0xEA blue screen caused by a damaged video card.
- Old BIOS
- Bad Memory
Thread Stuck In Device Driver Error in Windows 10 [SOLVED]
So without wasting any time let’s see How to Fix Thread Stuck In Device Driver Error in Windows 10 nerubatsiro rwegwaro rekugadzirisa dambudziko riri pazasi.
Method 1: Gadziridza Graphic Card Vatyairi
If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.
Nzira 2: Dzima Hardware Kuwedzera
1. Dzvanya Windows Key + I kuti uvhure Settings wobva wadzvanya System.
2. From the left-hand side menu, select kuratidza. Now at the bottom of the Display window, click on the Advanced display settings.
3. Zvino enda ku the Troubleshoot tab uye baya Chinja Zvirongwa.
4. Dhonza Hardware Acceleration slider kuna None
5. Click Ok then Apply and restart your PC.
6. If you don’t have the troubleshoot tab then right-click on the desktop and select NVIDIA Kudzora Panel (Every graphic card has their own control panel).
7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.
8. Next, under select, a PhysX processor make sure the CPU is selected.
9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.
10. Reboot PC yako uye ona kana uchikwanisa fix thread stuck in device driver error in Windows 10, if not, continue.
Method 3: Run SFC and DISM tool
1. Press Windows Key + X then click on Command Prompt (Admin).
2. Zvino nyora zvinotevera mucmd worova pinda:
Sfc / scannow
3. Wait for the above process to finish and once done restart your PC.
4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.
5. Vhura zvakare cmd wonyora murairo unotevera worova pinda mushure meumwe neumwe:
Dism / Online / Cleanup-Image / CheckHealth Dism / Online / Cleanup-Image / ScanHealth Dism / Online / Cleanup-Image / RestoreHealth
6. Rega murairo weDISM umhanye uye umirire kuti upedze.
7. If the above command doesn’t work then try on the below:
Dism / Mufananidzo: C: pasina Indaneti / Kuchenesa-Mufananidzo / RestoreHealth / Source: c: testmountwindows Dism / Online / Cleanup-Image / RestoreHealth / Source: c: testmountwindows / LimitAccess
Cherechedza: Tsiva iyo C: RepairSourceWindows nenzvimbo yekugadziridza yako sosi (Windows Installation kana Recovery Disc).
7. Reboot PC yako kuchengetedza shanduko.
Method 4: Perform Windows update
Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.
1. Dhinda Windows Kiyi + Ini kuti ndivhure Settings wobva wadzvanya pa Kwidziridzo & Chengetedzo.
2. Kubva kuruboshwe-kuruboshwe, menyu tinya pa Windows Update.
3. Zvino tinya pakanzi “Chengetedza zvinyorwa” bhatani kuti utarise chero zvigadziriso zviripo.
4. Kana paine zvigadziriso zvakamirira wobva wadzvanya pa Dhaunirodha & Isa zvigadziriso.
5. Kana zvigadziriso zvadhaunirodwa, zviise uye Windows yako ichava yechizvino-zvino.
6. Mushure mekunge zvigadziriso zvaiswa tangazve PC yako kuchengetedza shanduko.
Method 5: Run Windows 10 BSOD Troubleshooter
If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).
1. Press Windows key + I to open Settings then click on ‘Kwidziridzo & Chengetedzo'.
2. From the left pane, select ‘disposal'.
3. Bhura pasi ku 'Tsvaga uye gadzirisa mamwe matambudziko'zvikamu.
4. Dzvanya pa 'Blue Screen' uye tinya pa'Run the troubleshooter'.
Method 6: Give Graphics Card Access to the Application
1. Dzvanya Windows Key + I kuti uvhure Settings wobva wadzvanya pa System.
2. Kubva kuruboshwe-kurudyi menyu sarudza kuratidza wobva wadzvanya Graphics settings link kuzasi.
3. Select the type of app, if you can’t find your app or game in the list then select the Classic app and then use the “Browse"Sarudzo.
4. Navigate to your application or game, sarudza iyo, wobva wadzvanya Vhura.
5. Once the app is added to the list, click on it then again click on Sarudzo.
6. Sarudza "High waivako” and click on Save.
7. Reboot PC yako kuchengetedza shanduko.
Method 7: Update BIOS (Basic Input/Output System)
chitsamba
Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, expert supervision is recommended.
BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.
Method 8: Reset Overclocking Settings
If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.
Method 9: Faulty GPU
Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.
Method 10: Tarisa Power Supply
A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.
If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.
Ndizvo zvawakabudirira Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.