Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.

Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.

Depending on your PC you may receive one of the following errors:

• THREAD_STUCK_IN_DEVICE_DRIVER
• STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
• The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.

Few of the cause which can lead to Thread Stuck In Device Driver error are:

• Corrupt or old device drivers
• Konflikti i drejtuesit pas instalimit të pajisjes së re.
• Error 0xEA blue screen caused by a damaged video card.
• Old BIOS
• Bad Memory

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Pra, pa humbur kohë, le të shohim se si Fix Thread Stuck In Device Driver Error in Windows 10 me ndihmën e udhëzuesit për zgjidhjen e problemeve të listuara më poshtë.

Metoda 1: Përditësoni drejtuesit e kartave grafike

If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

Metoda 2: Çaktivizoni përshpejtimin e harduerit

1. Shtypni Windows Key + I për të hapur Cilësimet pastaj klikoni në Sistemit. 

2. From the left-hand side menu, select Shfaq. Now at the bottom of the Display window, click on the Advanced display settings.

3. Tani shkoni te the Troubleshoot tab dhe klikoni Ndrysho cilësimet.

4. Zvarritni Hardware Acceleration slider to None

5. Click Ok then Apply and restart your PC.

6. If you don’t have the troubleshoot tab then right-click on the desktop and select Paneli i Kontrollit NVIDIA (Every graphic card has their own control panel).

7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.

8. Next, under select, a PhysX processor make sure the CPU is selected.

9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.

10. Rinisni kompjuterin tuaj dhe shikoni nëse jeni në gjendje fix thread stuck in device driver error in Windows 10, if not, continue.

Method 3: Run SFC and DISM tool

1. Shtypni Windows Key + X dhe më pas klikoni mbi Command Prompt (Admin).

2. Tani shkruani sa vijon në cmd dhe shtypni enter:

Sfc / scannow

3. Prisni që procesi i mësipërm të përfundojë dhe pasi të keni mbaruar rinisni kompjuterin tuaj.

4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.

5. Hapni përsëri cmd dhe shkruani komandën e mëposhtme dhe shtypni enter pas secilës:

Dism /Online /Cleanup-Image /CheckHealth Dism /Online /Cleanup-Image /ScanHealth Dism /Online /Cleanup-Image /RestoreHealth

6. Lëreni komandën DISM të ekzekutohet dhe prisni që ajo të përfundojë.

7.  If the above command doesn’t work then try on the below:

Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Burimi:c:testmountwindows Dismi /Online /Cleanup-Image /RestoreHealth /Burimi:c:testmountwindows /LimitAccess

Shënim: Zëvendësoni C:RepairSourceWindows me vendndodhjen e burimit tuaj të riparimit (Instalimi i Windows ose Disku i Rimëkëmbjes).

7. Rinisni kompjuterin tuaj për të ruajtur ndryshimet.

Method 4: Perform Windows update

Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.

1. shtyp Windows Key + Unë për të hapur Settings pastaj kliko mbi Azhurnimi & Siguria.

2. From the left-hand side, menu click on Windows Update.

3. Tani klikoni në "Kontrolloni për përditësimebutonin ” për të kontrolluar për çdo përditësim të disponueshëm.

4. If any updates are pending then click on Shkarkoni dhe instaloni përditësimet.

5. Once the updates are downloaded, install them and your Windows will become up-to-date.

6. After the updates are installed reboot your PC to save changes.

Method 5: Run Windows 10 BSOD Troubleshooter

If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).

1. Press Windows key + I to open Settings then click on ‘Azhurnimi & Siguria'.

2. From the left pane, select ‘troubleshoot'.

3. Lëviz poshtë te 'Gjeni dhe rregulloni probleme të tjera' seksione.

4. Kliko në 'Ekran I kalter'dhe klikoni mbi'Kryeni alarme për zgjidhjen e problemeve'.

Method 6: Give Graphics Card Access to the Application

1. Shtypni Windows Key + I për të hapur Settings dhe më pas klikoni mbi Sistemit.

2. Nga menyja e majtë zgjidhni Shfaq pastaj klikoni në Graphics settings link në fund.

3. Select the type of app, if you can’t find your app or game in the list then select the Aplikacioni klasik and then use the “shfletoj"Opsion.

4. Navigate to your application or game, zgjidhni atë, dhe klikoni Open.

5. Once the app is added to the list, click on it then again click on Opsione.

6. Zgjidhni "Performancë të lartë” and click on Save.

7. Rinisni kompjuterin tuaj për të ruajtur ndryshimet.

Method 7: Update BIOS (Basic Input/Output System)

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.

Method 8: Reset Overclocking Settings

If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.

Method 9: Faulty GPU

Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.

Metoda 10: Kontrolloni furnizimin me energji elektrike

A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Kjo është ajo që ju keni me sukses Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.