Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.

Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.

Depending on your PC you may receive one of the following errors:

• THREAD_STUCK_IN_DEVICE_DRIVER
• STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
• The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.

Few of the cause which can lead to Thread Stuck In Device Driver error are:

• Corrupt or old device drivers
• Khohlano ea mokhanni kamora ho kenya lisebelisoa tse ncha.
• Error 0xEA blue screen caused by a damaged video card.
• Old BIOS
• Bad Memory

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Kahoo ntle le ho senya nako a re boneng Mokhoa oa ho Fix Thread Stuck In Device Driver Error in Windows 10 ka thuso ea tataiso ea tharollo ea mathata e thathamisitsoeng ka tlase.

Mokhoa oa 1: Ntlafatsa Bakhanni ba Karete ea Graphic

If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

Mokhoa oa 2: Tlosa ho potlakisa ha Hardware

1. Tobetsa Windows Key + I ho bula Settings ebe o tobetsa Tsamaiso. 

2. From the left-hand side menu, select Display. Now at the bottom of the Display window, click on the Advanced display settings.

3. Joale ea ho the Troubleshoot tab Mme o tobetse Fetola Litlhophiso.

4. Hula Hardware Acceleration slider ho letho

5. Click Ok then Apply and restart your PC.

6. If you don’t have the troubleshoot tab then right-click on the desktop and select Paneli ea Taolo ea NVIDIA (Every graphic card has their own control panel).

7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.

8. Next, under select, a PhysX processor make sure the CPU is selected.

9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.

10. Reboot hao PC 'me u bone hore na u khona ho fix thread stuck in device driver error in Windows 10, if not, continue.

Method 3: Run SFC and DISM tool

1. Tobetsa Windows Key + X ebe o tobetsa ho Command Prompt(Motsamaisi).

2. Joale thaepa tse latelang ho cmd ebe o otla Enter:

Sfc / scannow

3. Emela hore ts'ebetso e ka holimo e phethe 'me hang ha ho etsoa restart PC ea hau.

4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.

5. Bula cmd hape ebe u thaepa taelo e latelang ebe o otla kenya ka mor'a e 'ngoe le e 'ngoe:

Dism / Inthaneteng / Cleanup-Image / CheckHealth Dism / Inthaneteng / Cleanup-Image / ScanHealth Dism / Inthaneteng / Cleanup-Image / RestoreHealth

6. Etsa hore taelo ea DISM e sebetse 'me u emele hore e phethe.

7.  If the above command doesn’t work then try on the below:

Dism / Setšoantšo: C: offline / Cleanup-Image / RestoreHealth / Source: c: testmountwindows Dism / Online / Cleanup-Image / RestoreHealth / Source: c: testmountwindows / LimitAccess

Hlokomela: Tlosa sebaka sa C: RepairSourceWindows ka sebaka sa mohloli oa hau oa ho lokisa (Windows Installation kapa Recovery Disc).

7. Qala hape PC ea hau ho boloka liphetoho.

Method 4: Perform Windows update

Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.

1. Tlanya Windows Key + Ke ho bula Litlhophiso ebe o tobetsa Ntlafatso le Ts'ireletso.

2. Ho tloha ka letsohong le letšehali, tobetsa ea menu Ntlafatso ea Windows.

3. Joale tobetsa "Sheba lisebelisoa” konopo ho lekola lintlafatso tse fumanehang.

4. Haeba ho na le liapdeite tse ntseng li emetse, tobetsa ho Khoasolla 'me u kenye liapdeite.

5. Hang ha liapdeite li jarollotsoe, li kenye 'me Windows ea hau e tla fetoha ea morao-rao.

6. Ka mor'a hore liapdeite li kentsoe, qala komporo ea hau bocha ho boloka liphetoho.

Method 5: Run Windows 10 BSOD Troubleshooter

If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).

1. Press Windows key + I to open Settings then click on ‘Ntlafatso le Ts'ireletso'.

2. From the left pane, select ‘Troubleshoot'.

3. Tsamaisetsa tlase ho 'Fumana mme o lokise mathata a mang'likarolo.

4. Tobetsa ho 'Screen Screen'me u tobetse'Tsamaisa bothata ba mathata'.

Method 6: Give Graphics Card Access to the Application

1. Tobetsa Windows Key + I ho bula Litlhophiso ebe o tobetsa ho Tsamaiso.

2. Ho tsoa ho menu e ka letsohong le letšehali khetha Display ebe o tobetsa Graphics settings link ka tlase.

3. Select the type of app, if you can’t find your app or game in the list then select the Sesebelisoa sa khale and then use the “Browse"Khetho.

4. Navigate to your application or game, khetha, ebe o tobetsa Bula.

5. Once the app is added to the list, click on it then again click on Khetho.

6. Khetha "High tshebetso” and click on Save.

7. Qala hape PC ea hau ho boloka liphetoho.

Method 7: Update BIOS (Basic Input/Output System)

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.

Method 8: Reset Overclocking Settings

If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.

Method 9: Faulty GPU

Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.

Mokhoa oa 10: Hlahloba Phepelo ea Matla

A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Ke eona eo u nang le eona ka katleho Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.