Thread Stuck In Device Driver Error in Windows 10 [SOLVED]
Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.
Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.
Depending on your PC you may receive one of the following errors:
- THREAD_STUCK_IN_DEVICE_DEVICE
- STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
- The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.
Few of the cause which can lead to Thread Stuck In Device Driver error are:
- Corrupt or old device drivers
- Mgogoro wa dereva baada ya kusanikisha vifaa vipya.
- Error 0xEA blue screen caused by a damaged video card.
- Old BIOS
- Bad Memory
Thread Stuck In Device Driver Error in Windows 10 [SOLVED]
So without wasting any time let’s see How to Fix Thread Stuck In Device Driver Error in Windows 10 kwa msaada wa mwongozo wa utatuzi ulioorodheshwa hapa chini.
Njia ya 1: Sasisha Viendesha Kadi za Picha
If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.
Njia ya 2: Lemaza Uongezaji kasi wa Vifaa
1. Bonyeza Windows Key + I ili kufungua Mazingira kisha bonyeza System.
2. From the left-hand side menu, select Kuonyesha. Now at the bottom of the Display window, click on the Advanced display settings.
3. Sasa nenda the Troubleshoot tab na bonyeza Badilisha Mipangilio.
4. Buruta Hardware Acceleration slider to None
5. Click Ok then Apply and restart your PC.
6. If you don’t have the troubleshoot tab then right-click on the desktop and select Jopo la Udhibiti wa NVIDIA (Every graphic card has their own control panel).
7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.
8. Next, under select, a PhysX processor make sure the CPU is selected.
9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.
10. Washa upya Kompyuta yako na uone kama unaweza fix thread stuck in device driver error in Windows 10, if not, continue.
Method 3: Run SFC and DISM tool
1. Bonyeza Windows Key + X kisha ubofye Amri Prompt (Msimamizi).
2. Sasa charaza yafuatayo katika cmd na ugonge ingiza:
Sfc / scannow
3. Subiri mchakato ulio hapo juu ukamilike na uanzishe tena Kompyuta yako.
4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.
5. Fungua tena cmd na uandike amri ifuatayo na ugonge ingiza baada ya kila moja:
Dism /Mtandaoni /Safi-Picha /Angalia Afya Dism /Mtandaoni /Safisha-Picha /ScanHealth Dism /Mtandaoni /Safi-Picha /RestoreHealth
6. Acha amri ya DISM iendeshe na usubiri ikamilike.
7. If the above command doesn’t work then try on the below:
Dism /Picha:C:nje ya mtandao /Safisha-Picha /RestoreHealth /Chanzo:c:testmountwindows Dism /Mtandaoni /Safisha-Picha /RestoreHealth /Chanzo:c:testmountwindows /LimitAccess
Kumbuka: Badilisha C:RepairSourceWindows na eneo la chanzo chako cha ukarabati (Usakinishaji wa Windows au Diski ya Urejeshaji).
7. Washa upya Kompyuta yako ili kuhifadhi mabadiliko.
Method 4: Perform Windows update
Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.
1. Bonyeza Ufunguo wa Windows + Mimi ili kufungua Mipangilio kisha bonyeza Sasisha na Usalama.
2. Kutoka upande wa kushoto, bonyeza kwenye menyu Mwisho wa Windows.
3. Sasa bonyeza "Angalia vilivyojiri vipya” ili kuangalia masasisho yoyote yanayopatikana.
4. Ikiwa masasisho yoyote yanasubiri basi bofya Pakua na Usakinishe masasisho.
5. Mara masasisho yanapopakuliwa, yasakinishe na Windows yako itakuwa ya kisasa.
6. Baada ya masasisho kusakinishwa washa upya Kompyuta yako ili kuhifadhi mabadiliko.
Method 5: Run Windows 10 BSOD Troubleshooter
If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).
1. Press Windows key + I to open Settings then click on ‘Sasisha na Usalama'.
2. From the left pane, select ‘troubleshoot'.
3. Tembeza chini hadi 'Pata na urekebishe shida zingine'sehemu.
4. Bonyeza 'Picha ya Bluu' na bonyeza 'Run runtioter'.
Method 6: Give Graphics Card Access to the Application
1. Bonyeza Windows Key + I ili kufungua Mipangilio kisha ubofye System.
2. Kutoka kwenye menyu ya mkono wa kushoto chagua Kuonyesha kisha bonyeza Graphics settings link chini.
3. Select the type of app, if you can’t find your app or game in the list then select the Programu ya kawaida and then use the “kuvinjari"Chaguo.
4. Navigate to your application or game, chagua, na bonyeza Fungua.
5. Once the app is added to the list, click on it then again click on Chaguzi.
6. Chagua "juu ya utendaji” and click on Save.
7. Washa upya Kompyuta yako ili kuhifadhi mabadiliko.
Method 7: Update BIOS (Basic Input/Output System)
Kumbuka
Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, expert supervision is recommended.
BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.
Method 8: Reset Overclocking Settings
If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.
Method 9: Faulty GPU
Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.
Njia ya 10: Angalia Ugavi wa Nguvu
A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.
If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.
Hiyo ndiyo umefanikiwa Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.