Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

Tiyaking gumawa ng restore point, kung sakaling may magkamali.

tandaan: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

Paraan 1: I-off ang Mabilis na Startup

1. Pindutin ang Windows Key + R pagkatapos ay i-type ang control at pindutin ang Enter para buksan Control Panel.

2.I-click sa Hardware at Sound pagkatapos ay mag-click sa Mga Pagpipilian sa Power.

3.Pagkatapos mula sa kaliwang window pane piliin ang "Piliin kung ano ang gagawin ng mga pindutan ng kuryente."

4. Ngayon mag-click sa "Baguhin ang mga setting na kasalukuyang hindi magagamit."

5.Alisan ng tsek ang “I-on ang mabilis na startup” at i-click ang I-save ang mga pagbabago.

Paraan 2: Patakbuhin ang Awtomatikong Pag-aayos

1.Ipasok ang Windows 10 bootable installation DVD at i-restart ang iyong PC.

2.When prompted to Pindutin ang anumang key upang mag-boot mula sa CD o DVD, pindutin ang anumang key upang magpatuloy.

3. Piliin ang iyong mga kagustuhan sa wika, at i-click ang Susunod. I-click ang Repair iyong computer sa kaliwang ibaba.

4.Sa pumili ng opsyon na screen, i-click I-troubleshoot.

5.Sa screen ng Troubleshoot, i-click Mga advanced na pagpipilian.

6. Sa screen ng Advanced na mga opsyon, i-click Awtomatikong Pag-aayos o Pag-aayos ng Startup.

7. Maghintay hanggang sa Mga Awtomatikong Pag-aayos ng Windows/Startup kumpleto.

8. I-restart at matagumpay mo na Fix Computer does not start until restarted multiple times issue, kung hindi, magpatuloy.

Gayundin, basahin Paano ayusin ang Awtomatikong Pag-aayos ay hindi naayos ang iyong PC.

Paraan 3: I-reset ang BIOS sa mga default na setting

1. I-off ang iyong laptop, pagkatapos ay i-on ito at sabay-sabay pindutin ang F2, DEL o F12 (depende sa iyong tagagawa) na papasukin Pag-setup ng BIOS.

2. Ngayon ay kakailanganin mong hanapin ang opsyon sa pag-reset sa i-load ang default na configuration at maaari itong pangalanan bilang I-reset sa default, I-load ang mga default ng pabrika, I-clear ang mga setting ng BIOS, I-load ang mga default sa pag-set up, o katulad na bagay.

3. Piliin ito gamit ang iyong mga arrow key, pindutin ang Enter, at kumpirmahin ang operasyon. Iyong BIOS gagamit na ngayon nito mga default na setting.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

Paraan 5: Suriin ang Power Supply

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

Paraan 7: Pag-reset ng ATX

tandaan: Ang prosesong ito ay karaniwang nalalapat sa mga laptop, kaya kung mayroon kang computer pagkatapos ay iwanan ang pamamaraang ito.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2. Ngayon alisin ang baterya mula sa likod at pindutin nang matagal ang power button sa loob ng 15-20 segundo.

tandaan: Huwag na lang ikonekta ang power cord, sasabihin namin sa iyo kung kailan gagawin iyon.

3.Now plug in ang iyong kable ng kuryente (hindi dapat ipasok ang baterya) at subukang i-boot ang iyong laptop.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

Inirerekomenda:

Iyan na ang iyong matagumpay Fix Computer does not start until restarted multiple times issue ngunit kung mayroon ka pa ring mga katanungan tungkol sa gabay na ito, huwag mag-atubiling tanungin sila sa seksyon ng komento.