6 فروری 2018

Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Fix Computer does not start until restarted multiple times

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

کچھ غلط ہونے کی صورت میں بحالی پوائنٹ بنانا یقینی بنائیں۔

نوٹ: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

طریقہ 1: فاسٹ اسٹارٹ اپ کو بند کریں۔

1. Windows Key + R دبائیں پھر کنٹرول ٹائپ کریں اور کھولنے کے لیے Enter دبائیں۔ کنٹرول پینل.

کنٹرول پینل

2.Cick on ہارڈ ویئر اور آواز پھر پر کلک کریں پاور اختیارات.

کنٹرول پینل میں بجلی کے اختیارات

3. پھر بائیں ونڈو پین سے منتخب کریں "منتخب کریں کہ پاور بٹن کیا ہیں."

منتخب کریں کہ پاور بٹن کیا کرتے ہیں جو USB کو تسلیم نہیں کیا جاتا ہے۔

4. اب "پر کلک کریںترتیبات کو تبدیل کریں جو فی الحال دستیاب نہیں ہیں."

ترتیبات کو تبدیل کریں جو فی الحال دستیاب نہیں ہیں۔

5. غیر چیک کریں "روزہ شروع اپنائیںاور تبدیلیاں محفوظ کریں پر کلک کریں۔

تیز اسٹارٹ اپ کو غیر چیک کریں۔

طریقہ 2: خودکار مرمت چلائیں۔

1.ونڈوز 10 بوٹ ایبل انسٹالیشن ڈی وی ڈی داخل کریں۔ اور اپنے کمپیوٹر کو دوبارہ شروع کریں.

2.When prompted to کوئی بھی بٹن دبائیے CD یا DVD سے بوٹ کرنے کے لیے، جاری رکھنے کے لیے کوئی بھی کلید دبائیں۔

سی ڈی یا ڈی وی ڈی سے بوٹ کے ل any کسی بھی کلید کو دبائیں

3. اپنی زبان کی ترجیحات کو منتخب کریں، اور اگلا پر کلک کریں۔ مرمت پر کلک کریں۔ آپ کا کمپیوٹر نیچے بائیں طرف۔

اپنے کمپیوٹر کی مرمت کریں

4. ایک آپشن اسکرین منتخب کرنے پر، کلک کریں۔ دشواری حل کریں.

ونڈوز 10 آٹومیٹک اسٹارٹ اپ مرمت پر ایک آپشن منتخب کریں۔

5. ٹربل شوٹ اسکرین پر، کلک کریں۔ اعلی درجے کے اختیارات۔.

ٹربل شوٹ اسکرین سے ایڈوانس آپشن منتخب کریں۔

6. ایڈوانسڈ آپشنز اسکرین پر، کلک کریں۔ خودکار مرمت یا اسٹارٹ اپ مرمت.

خودکار مرمت چلائیں

7. تک انتظار کریں۔ ونڈوز آٹومیٹک/اسٹارٹ اپ مرمت مکمل

8. دوبارہ شروع کریں اور آپ نے کامیابی سے کامیابی حاصل کی ہے۔ Fix Computer does not start until restarted multiple times issue, اگر نہیں، جاری رکھیں.

یہ بھی پڑھیں۔ خودکار مرمت کو کیسے ٹھیک کریں آپ کے کمپیوٹر کی مرمت نہیں ہو سکی۔

طریقہ 3: BIOS کو ڈیفالٹ سیٹنگز پر ری سیٹ کریں۔

1. اپنے لیپ ٹاپ کو بند کریں، پھر اسے آن کریں اور بیک وقت F2، DEL یا F12 دبائیں۔ (آپ کے کارخانہ دار پر منحصر ہے) داخل ہونے کے لیے BIOS سیٹ اپ۔

BIOS سیٹ اپ میں داخل ہونے کے لیے DEL یا F2 کلید دبائیں۔

2.اب آپ کو دوبارہ ترتیب دینے کا اختیار تلاش کرنے کی ضرورت ہوگی۔ ڈیفالٹ کنفیگریشن لوڈ کریں۔ اور اسے ری سیٹ ٹو ڈیفالٹ، لوڈ فیکٹری ڈیفالٹس، کلیئر BIOS سیٹنگز، لوڈ سیٹ اپ ڈیفالٹس، یا کچھ اسی طرح کا نام دیا جا سکتا ہے۔

BIOS میں ڈیفالٹ کنفیگریشن لوڈ کریں۔

3. اسے اپنی تیر والے بٹنوں سے منتخب کریں، Enter دبائیں، اور آپریشن کی تصدیق کریں۔ آپ کا BIOS اب اس کا استعمال کریں گے پہلے سے طے شدہ ترتیبات

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

چیک کریں کہ آیا کمپیوٹر ہارڈ ڈسک ٹھیک طرح سے منسلک ہے۔

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

طریقہ 5: پاور سپلائی چیک کریں۔

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

ناقص پاور سپلائی

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

طریقہ 7: ATX ری سیٹ کرنا

نوٹ: یہ عمل عام طور پر لیپ ٹاپ پر لاگو ہوتا ہے، لہذا اگر آپ کے پاس کمپیوٹر ہے تو یہ طریقہ چھوڑ دیں۔

1.Power off your laptop then remove the power cord, leave it for few minutes.

2۔اب بیٹری ہٹا دیں پیچھے سے دبائیں اور پاور بٹن کو 15-20 سیکنڈ تک دبائے رکھیں۔

اپنی بیٹری کو ان پلگ کریں۔

نوٹ: ابھی بجلی کی تار نہ جوڑیں، ہم آپ کو بتائیں گے کہ ایسا کب کرنا ہے۔

3.Now plug in آپ کی طاقت کی ہڈی (بیٹری نہیں ڈالی جانی چاہئے) اور اپنے لیپ ٹاپ کو بوٹ کرنے کی کوشش کر رہے ہیں۔

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

سفارش کی جاتی ہے:

یہ آپ نے کامیابی سے حاصل کی ہے۔ Fix Computer does not start until restarted multiple times issue لیکن اگر آپ کے پاس اب بھی اس گائیڈ کے بارے میں کوئی سوالات ہیں تو تبصرے کے سیکشن میں بلا جھجھک ان سے پوچھیں۔