After installing the latest Windows feature update, your PC may be trapped in an automated repair cycle. This article will give you various troubleshooting techniques if you’re attempting to locate a repair approach that will allow you to resolve diagnosing your PC Windows 10 issue. So, continue reading to fix diagnosing your PC stuck issue on Windows 10.
How to Fix Stuck on Diagnosing your PC in Windows 10
We looked into this diagnosing your PC stuck issue by looking at multiple user reports and tried various repair strategies suggested by some impacted users. As it turns out, various conditions make your system trapped inside the diagnosing your PC screen. Here’s a list of circumstances that might lead to this issue on ونڈوز 10.
- System File Corruption: Corrupted system files might also cause the System Diagnostic tool to appear at every system start-up. If this utility is also corrupted, it will be stuck in a loop.
- Inadequate System Space: As it turns out, this problem of this issue can also arise when the system lacks sufficient storage capacity to load all the programs and services required for the starting operation.
- Glitched Automated Repair Utility: This issue has been reported by multiple customers to be caused by mysterious system drive troubles. In this instance, the Automatic Repair program will try to open at every restart in an attempt to fix the problem, but it will be unable to locate the source of the problem.
- Faulty BCD Data: Corrupted booting data might also cause this issue in severe conditions, which prevents the starting process from finishing.
Some afflicted customers have attempted rebooting their computers to get rid of this problem but have claimed that their computers go into a dark screen, show the logo, and then return to the Diagnostic PC page. The operating system indicates that your device has been diagnosed, but there might be no progress made. You can follow the below methods to resolve the issue.
Method 1: Perform Hard Reboot
You can do a hard reboot if your Windows is unable to boot due to the Preparing Automatic Repair or Diagnosing your PC issue.
1. ان پلگ کریں۔ AC اڈاپٹر اور کو ہٹا دیں بیٹری آلہ سے.
2. Check if it boots up normally by pressing and holding the پاور بٹن لیے 20 سیکنڈ.
If this technique fails, try one of the following options.
بھی پڑھیں: ونڈوز 10 میں WDF_VIOLATION کی خرابی کو کیسے ٹھیک کریں۔
طریقہ 2: سیف موڈ اور کلیئر اسپیس میں بوٹ کریں۔
As some users have discovered, this issue can also occur when the system does not have enough capacity to start. Several individuals in a similar position have overcome the problem by running their machines in Safe Mode and freeing up some space. Follow our guide on How to Boot to Safe Mode in Windows 10.
Then, perform Disk cleanup by following our guide to run Disk Cleanup.
If diagnosing your PC Windows 10 problem persists, follow the next procedure below.
طریقہ 3: سسٹم فائلوں کی مرمت کریں۔
It’s also possible that this problem is caused by System File corruption. These corrupted files might prevent the booting procedure from finishing. You’ll have to run the scans before the Booting phase since you can’t go beyond the Diagnostics page. Read our guide on How to Repair System Files on Windows 10.
بھی پڑھیں: درست کریں کمپیوٹر دوبارہ مطابقت پذیر نہیں ہوا کیونکہ وقت کا کوئی ڈیٹا دستیاب نہیں تھا۔
Method 4: Run System Restore Utility
You may be dealing with a serious corruption problem that can’t be treated traditionally. When faced with a circumstance like this, the best action is to take a damage-control strategy. Most start-up troubles caused by system file corruption can be resolved by returning the machine to a healthy condition in which all components are working properly. Follow the below steps.
1. داخل کریں تنصیب ڈسک اور اپنے کمپیوٹر کو دوبارہ شروع کریں.
2. کوئی بھی دبائیں۔ کلید to start up the installation media when you see the booting screen.
3. When Windows Setup has finished loading, click on اپنے کمپیوٹر کی مرمت کریں.
4. تک رسائی حاصل کریں دشواری حل کریں menu from the first repair menu.
5. پر کلک کریں اعلی درجے کے اختیارات from the Troubleshoot menu.
6. پھر کلک کریں کمانڈ پرامپٹ from the list of available utilities.
7. کھولنے کے لئے نظام کی بحالی program, type the rstrui.exe command into the کمانڈ پرامپٹ ونڈو اور دبائیں کلید درج کریں.
8. پر کلک کریں اگلے once you’ve reached the first screen.
9. اب ، ٹک the option labeled مزید بحال پوائنٹس دکھائیں.
10. Once you’ve done so, go through each restoration سنیپ شاٹ and pick one taken before the Diagnostics problem.
11. To go on to the next option, choose the suitable تصویر اور پر کلک کریں اگلے.
12. اب، پر کلک کریں ختم.
Your system will restart automatically after restoring, and the old machine will be fixed at the next system starting.
Method 5: Rebuild BCD
In Windows 10, you’ll get the Preparing Automatic Repair error if the boot files are missing or damaged. As a result, some users will re-build the boot record using the procedures below.
1. Insert the Windows bootable installation CD into the PC displaying the error message Preparing Automatic Repair or Diagnosing your PC.
2. Start your computer by booting from the تنصیب سی ڈی.
3. To continue, choose your زبان ترتیبات اور پر کلک کریں۔ اگلے بٹن پر کلک کرنا ہے۔
4. منتخب کریں مرمت آپ کا کمپیوٹر.
5. منتخب کریں دشواری حل کریں.
6. منتخب کریں کمانڈ پرامپٹ.
7. Enter the instructions below into the prompt, and press the کلید درج کریں ہر ایک کے بعد.
bootrec / fixmbr bootrec / fixboot بوٹریک / سکینو بوٹرایک / تعمیراتی بیڈی
8. Then, type the command باہر نکلیں اور دبائیں کلید درج کریں.
9. آخر میں، پی سی کو دوبارہ شروع کریں.
بھی پڑھیں: ونڈوز اپ ڈیٹ کی خرابی 80072ee2 کو کیسے ٹھیک کریں۔
طریقہ 6: خودکار اسٹارٹ اپ مرمت کو غیر فعال کریں۔
If this happens, the Automatic Start-up Repair software will launch at every system start-up. However, if the utility is broken, you might not be able to go past the start-up screen. Therefore, disabling this software would prevent the Diagnosing your PC screen from appearing.
1. As soon as you see the introductory screen, press the F8 key repeatedly to get to the اعلی درجے کی بوٹ کے اختیارات مینو.
2. منتخب کریں محفوظ طریقہ with Networking from the Advanced Boot Options menu by pressing the F5 کلید or using the arrow keys.
3. When the booting routine is complete, press ونڈوز + آئی کیز۔ شروع کرنے کے لئے ڈائیلاگ باکس چلائیں۔.
4. ٹائپ کریں سییمڈی اور مارا Ctrl + Shift + Enter کیز ایک کھولنے کے لئے بلند کمانڈ پر فوری.
5. پر کلک کریں جی ہاں پرامپٹ میں
6. درج ذیل درج کریں کمانڈ اور پریس کلید درج کریں.
bcdedit / سیٹ بحالی NO
7. Once the process is complete, دوبارہ شروع کریں آپکی ڈیوائس.
If diagnosing your PC Windows 10 problem persists or you don’t get a different error, continue the next procedure.
طریقہ 7: اپ ڈیٹس کو ان انسٹال کریں۔
If the update fails to install properly on your device, you might face this issue. Follow the below steps to resolve the discussed issue.
1. مارو ونڈوز کلیدی اور ٹائپ کریں کنٹرول پینل، پھر، پر کلک کریں۔ اوپن.
2. اب، پر کلک کریں ایک پروگرام ان انسٹال کریں کے تحت اختیار پروگرام menu as depicted.
3. اب، پر کلک کریں نصب اپ ڈیٹس دیکھیں in the left pane as shown.
4. Now, search and select the most recent update by referring to Installed On the date and clicking on انسٹال کریں ذیل میں دکھایا گیا ہے کے طور پر اختیار.
5. Finally, confirm any prompt and پی سی کو دوبارہ شروع کریں.
Check if diagnosing your PC stuck issue persists or not.
بھی پڑھیں: ونڈوز 7 پر iaStorA.sys BSOD کی خرابی کو ٹھیک کرنے کے 10 طریقے
Method 8: Perform Repair Install
If none of the above-mentioned repair methods have worked, you’re probably dealing with a serious case of system corruption that can’t be fixed using normal methods. In this case, the only way to repair the problem is to reset every Windows component, including any booting-related tasks causing the Automatic Repair loop. You may always perform a clean installation but bear in mind that doing so will lose any saved data within your Windows system. If you choose a clean install, all your personal data, applications, games, documents, and other media will disappear. Read our guide on How to do a Clean Install of Windows 10 and implement the same.
سفارش کی جاتی ہے:
We hope you found this information useful and that you were able to resolve stuck on diagnosing your PC in Windows 10 problem. Please let us know which technique was the most beneficial for you. Please use the form below if you have any queries or comments. Also, let us know what you want to learn next.