Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.

Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.

Depending on your PC you may receive one of the following errors:

• THREAD_STUCK_IN_DEVICE_DRIVER
• STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
• The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.

Few of the cause which can lead to Thread Stuck In Device Driver error are:

• Corrupt or old device drivers
• نیا ہارڈ ویئر انسٹال کرنے کے بعد ڈرائیور کا تنازعہ۔
• Error 0xEA blue screen caused by a damaged video card.
• Old BIOS
• Bad Memory

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

تو کوئی وقت ضائع کیے بغیر آئیے دیکھتے ہیں کہ کیسے Fix Thread Stuck In Device Driver Error in Windows 10 ذیل میں درج ٹربل شوٹنگ گائیڈ کی مدد سے۔

طریقہ 1: گرافک کارڈ ڈرائیورز کو اپ ڈیٹ کریں۔

If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

طریقہ 2: ہارڈ ویئر ایکسلریشن کو غیر فعال کریں۔

1. کھولنے کے لیے Windows Key + I دبائیں۔ ترتیبات پھر پر کلک کریں نظام. 

2. From the left-hand side menu, select دکھائیں. Now at the bottom of the Display window, click on the Advanced display settings.

3. اب جائیں the Troubleshoot tab اور پر کلک کریں سیٹنگ کو تبدیل کریں.

4. گھسیٹیں۔ Hardware Acceleration slider کوئی نہیں

5. Click Ok then Apply and restart your PC.

6. If you don’t have the troubleshoot tab then right-click on the desktop and select NVIDIA کنٹرول پینل (Every graphic card has their own control panel).

7. From the NVIDIA Control Panel, select “PhysX کنفیگریشن سیٹ کریں۔” from the left column.

8. Next, under select, a PhysX processor make sure the CPU is selected.

9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.

10. اپنے پی سی کو ریبوٹ کریں اور دیکھیں کہ کیا آپ اس قابل ہیں۔ fix thread stuck in device driver error in Windows 10, if not, continue.

Method 3: Run SFC and DISM tool

1. Windows Key + X دبائیں پھر کلک کریں۔ کمانڈ پرامپٹ (ایڈمن)۔

2. اب cmd میں درج ذیل کو ٹائپ کریں اور انٹر دبائیں:

ایس ایف سی / اسکانانو

3. Wait for the above process to finish and once done restart your PC.

4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.

5. دوبارہ cmd کھولیں اور درج ذیل کمانڈ کو ٹائپ کریں اور ہر ایک کے بعد انٹر کو دبائیں۔

Dism/Online/Cleanup-Image/CheckHealth Dism/Online/Cleanup-Image/ScanHealth Dism/Online/Cleanup-Image/RestoreHealth

6. DISM کمانڈ کو چلنے دیں اور اس کے ختم ہونے کا انتظار کریں۔

7.  If the above command doesn’t work then try on the below:

Dism/Image:C:offline/Cleanup-Image/RestoreHealth/Source:c:testmountwindows Dism/Online/Cleanup-Image/RestoreHealth/Source:c:testmountwindows/LimitAccess

نوٹ: C:RepairSourceWindows کو اپنے مرمتی ماخذ (ونڈوز انسٹالیشن یا ریکوری ڈسک) کے مقام سے تبدیل کریں۔

7. تبدیلیاں محفوظ کرنے کے لیے اپنے پی سی کو ریبوٹ کریں۔

Method 4: Perform Windows update

Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.

1. دبائیں ونڈوز کی + میں Settings کھولیں پھر کلک کریں۔ تازہ کاری اور سیکیورٹی۔

2. بائیں طرف سے، مینو پر کلک کریں۔ ونڈوز اپ ڈیٹ.

3. اب "پر کلک کریںاپ ڈیٹس کی جانچ پڑتال کریںکسی بھی دستیاب اپ ڈیٹس کو چیک کرنے کے لیے بٹن۔

4. اگر کوئی اپ ڈیٹس زیر التواء ہیں تو پر کلک کریں۔ اپ ڈیٹس ڈاؤن لوڈ اور انسٹال کریں۔

5. اپ ڈیٹس ڈاؤن لوڈ ہونے کے بعد، انہیں انسٹال کریں اور آپ کی ونڈوز اپ ٹو ڈیٹ ہو جائے گی۔

6. اپ ڈیٹس انسٹال ہونے کے بعد تبدیلیاں محفوظ کرنے کے لیے اپنے کمپیوٹر کو ریبوٹ کریں۔

Method 5: Run Windows 10 BSOD Troubleshooter

If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).

1. Press Windows key + I to open Settings then click on ‘تازہ کاری اور سیکیورٹی'.

2. From the left pane, select ‘دشواری حل کریں'.

3. نیچے سکرول کریں'دوسرے مسائل تلاش کریں اور ان کو حل کریں' حصے.

4. پر کلک کریںنیلی سکرین'اور' پر کلک کریںخرابی کا سراغ لگانا چلائیں'.

Method 6: Give Graphics Card Access to the Application

1. ترتیبات کو کھولنے کے لیے ونڈوز کی + I دبائیں پھر کلک کریں۔ نظام.

2. بائیں ہاتھ کے مینو سے منتخب کریں۔ دکھائیں پھر پر کلک کریں Graphics settings link کے نیچے دیے گئے.

3. Select the type of app, if you can’t find your app or game in the list then select the کلاسیکی ایپ and then use the “براؤز کریں"اختیار.

4. Navigate to your application or game، اسے منتخب کریں ، اور کلک کریں کھولیں

5. Once the app is added to the list, click on it then again click on اختیارات.

6 منتخب کریں “اعلی کارکردگی” and click on Save.

7. تبدیلیاں محفوظ کرنے کے لیے اپنے پی سی کو ریبوٹ کریں۔

Method 7: Update BIOS (Basic Input/Output System)

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.

Method 8: Reset Overclocking Settings

If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.

Method 9: Faulty GPU

Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.

طریقہ 10: پاور سپلائی چیک کریں۔

A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

یہ آپ نے کامیابی سے حاصل کی ہے۔ Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.