Fix Background Intelligent Transfer Service won’t start: For Windows Update to function Background Intelligent Transfer Service (BITS) is very important as it basically acts as a download manager for Windows Update. BITS transfers files between client and server in the background and also provide progress information when needed. Now if you are having issues in downloading updates then it will be most probably caused because of BITS. Either the configuration of BITS is corrupted or BITS is not able to start.
If you will go to services window you will find out that Background Intelligent Transfer Service (BITS) won’t start. These are the type of errors which you will face while trying to start BITS:
Background intelligent transfer service did not start properly
Background intelligent transfer service will not start
Background intelligent transfer service has stopped working
Windows could not start the Background Intelligent Transfer service on the local computer. For more information review the system event log. If this is a non-Microsoft service contact the service vendor and refer to service-specific error code -2147024894. (0x80070002)
Now if you are facing a similar issue with BITS or with Windows update then this post is for you. Without wasting any time let’s see how to actually Fix Background Intelligent Transfer Service won’t start issue with the below-listed troubleshooting guide.
Fix Background Intelligent Transfer Service won’t start
Đảm bảo tạo điểm khôi phục đề phòng trường hợp xảy ra sự cố.
Method 1: Start BITS from Services
1.Press Windows Keys + R then type services.msc và nhấn Enter.
2.Now find BITS and then double click on it.
3.Make sure the Startup type is set to Tự động and the service is running, if not then click on Nút bắt đầu.
4.Nhấp vào Áp dụng theo sau là OK.
5.Reboot your PC and again try to update Windows.
Method 2: Enable dependent Services
1.Press Windows Keys + R then type services.msc và nhấn Enter.
2.Now find the below-listed services and double click on each of them to change their properties:
Terminal Services
Cuộc gọi thủ tục từ xa (RPC)
System Event Notification
Windows Management Instrumentation Driver Extensions
COM+ Event System
Trình khởi chạy quy trình máy chủ DCOM
3.Make sure their Startup type is set to Tự động and the above services are running, if not then click on Nút bắt đầu.
4.Nhấp vào Áp dụng theo sau là OK.
5. Khởi động lại PC của bạn để lưu các thay đổi và xem liệu bạn có thể thực hiện được không Fix Background Intelligent Transfer Service won’t start.
Phương pháp 3: Chạy trình kiểm tra tệp hệ thống
1. Nhấn phím Windows + X sau đó nhấp vào Dấu nhắc lệnh (Quản trị viên).
2. Bây giờ hãy nhập nội dung sau vào cmd và nhấn enter:
Sfc /scannow sfc /scannow /offbootdir=c: /offwindir=c:windows (Nếu cách trên không thành công thì hãy thử cái này)
3. Đợi quá trình trên kết thúc và sau khi hoàn tất, hãy khởi động lại PC của bạn.
Method 4: Run Windows Update Troubleshooter
1.Type “troubleshooting” in Windows Search bar and click on Xử lý sự cố.
2.Next, from the left window pane select Xem tất cả.
3.Then from the Troubleshoot computer problems list select Windows Update.
4.Follow on-screen instructions and let the Windows Update Troubleshoot run.
5.Restart your PC and see if you are able to Fix Background Intelligent Transfer Service won’t start.
Method 5: Run DISM Tool
1. Nhấn phím Windows + X và chọn Dấu nhắc lệnh (Quản trị viên).
2.Nhập lệnh sau bằng cmd và nhấn enter sau mỗi lệnh:
a) Dism /Online /Cleanup-Image /CheckHealth b) Dism /Online /Cleanup-Image /ScanHealth c) Dism /Online /Cleanup-Image /RestoreHealth
3. Để lệnh DISM chạy và đợi cho đến khi nó chạy xong.
4. Nếu lệnh trên không hoạt động thì hãy thử lệnh bên dưới:
Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows Dism /Online /Cleanup-Image /RestoreHealth /Source:c:testmountwindows /LimitAccess
Lưu ý: Thay thế C:RepairSourceWindows bằng vị trí nguồn sửa chữa của bạn (Đĩa cài đặt hoặc khôi phục Windows).
5. Khởi động lại PC của bạn để lưu các thay đổi và xem liệu bạn có thể thực hiện được không Fix Background Intelligent Transfer Service won’t start, nếu không thì tiếp tục với phương pháp tiếp theo.
Method 6: Reset the Download Queue
1.Nhấn Windows Key + R then type the following and hit Enter:
%ALLUSERSPROFILE%Application DataMicrosoftNetworkDownloader
2.Now look for qmgr0.dat and qmgr1.dat, if found make sure to delete these files.
3. Nhấn phím Windows + X rồi chọn Dấu nhắc lệnh (Quản trị viên).
4.Nhập lệnh sau vào cmd và nhấn Enter:
bit bắt đầu ròng
5.Again try to update window and see if it works.
Phương pháp 7: Sửa lỗi đăng ký
1. Nhấn phím Windows + R rồi gõ regedit và nhấn Enter để mở Đăng ký biên tập.
2.Navigate to the following registry key:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlBackupRestoreFilesNotToBackup
3.If the above key exists then continues, if not then right-click on Phục hồi dữ liệu đã lưu và chọn Mới> Chìa khóa.
4.Type FilesNotToBackup and then hit Enter.
5.Exit Registry Editor and press Windows Key + R then type services.msc và nhấn Enter.
6.Find BITS and double-click on it. Then in the Tab chung, bấm vào khởi đầu.
Đề xuất cho bạn:
Thế là bạn đã thành công Fix Background Intelligent Transfer Service won’t start nhưng nếu bạn vẫn có bất kỳ thắc mắc nào liên quan đến hướng dẫn này thì vui lòng hỏi họ trong phần bình luận.