Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.

Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.

Depending on your PC you may receive one of the following errors:

• I-THREAD_STUCK_IN_DEVICE_DRIVER
• STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
• The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.

Few of the cause which can lead to Thread Stuck In Device Driver error are:

• Corrupt or old device drivers
• Ungquzulwano lomqhubi emva kokufaka izixhobo zekhompyutha ezintsha.
• Error 0xEA blue screen caused by a damaged video card.
• Old BIOS
• Bad Memory

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Ngoko ngaphandle kokuchitha ixesha makhe sibone ukuba senze njani Fix Thread Stuck In Device Driver Error in Windows 10 ngoncedo lwesikhokelo sokulungisa ingxaki esidweliswe ngezantsi.

Indlela yesi-1: Hlaziya abaqhubi beKhadi leMzobo

If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

Indlela ye-2: Khubaza i-Hardware Acceleration

1. Cofa iSitshixo seWindows + I ukuvula izicwangciso emva koko ucofe Inkqubo. 

2. From the left-hand side menu, select Bonisa. Now at the bottom of the Display window, click on the Advanced display settings.

3. Ngoku yiya ku the Troubleshoot tab kwaye nqakraza Guqula Useto.

4. Tsala i Hardware Acceleration slider kuNonye

5. Click Ok then Apply and restart your PC.

6. If you don’t have the troubleshoot tab then right-click on the desktop and select Iphaneli yokulawula ye-NVIDIA (Every graphic card has their own control panel).

7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.

8. Next, under select, a PhysX processor make sure the CPU is selected.

9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.

10. Qalisa kwakhona iPC yakho kwaye ubone ukuba uyakwazi na fix thread stuck in device driver error in Windows 10, if not, continue.

Method 3: Run SFC and DISM tool

1. Cofa i-Windows Key + X uze ucofe ku I-Command Prompt(Admin).

2. Ngoku chwetheza oku kulandelayo kwi-cmd kwaye ucofe u-enter:

I-Sfc / iskena

3. Lindela le nkqubo ingentla igqibe kwaye xa sele yenziwe ngokutsha iPC yakho.

4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.

5. Kwakhona vula i-cmd kwaye uchwetheze lo myalelo ulandelayo kwaye ucofe u-enter emva komnye nomnye:

I-Dism / kwi-intanethi / yokucoca-Umfanekiso / iCheckHealth Dism / kwi-intanethi / yokucoca-Umfanekiso / i-ScanHealth Dism / kwi-intanethi / yokucoca-Umfanekiso / RestoreHealth

6. Vumela umyalelo we-DISM usebenze kwaye ulinde ukugqiba.

7.  If the above command doesn’t work then try on the below:

Dism / Umfanekiso: C: offline / Coca-Umfanekiso / RestoreHealth / Umthombo: c:testmountwindows Dism / Online / Coca-Umfanekiso / RestoreHealth / Umthombo: c:testmountwindows / LimitAccess

Phawula: Faka esikhundleni i-C:RepairSourceWindows ngendawo yomthombo wakho wokulungisa (uFakelo lweWindows okanye iDiskhi yoBuyiselo).

7. Qalisa kwakhona iPC yakho ukugcina utshintsho.

Method 4: Perform Windows update

Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.

1. Cinezela Iqhosha leWindows + I ukuvula Useto emva koko ucofe ku Uhlaziyo kunye noKhuseleko.

2. Ukusuka kwicala lasekhohlo, nqakraza kwimenyu Uhlaziyo lweWindows.

3. Ngoku cofa kwi "Jonga uvuselelo” iqhosha ukujonga naluphi na uhlaziyo olukhoyo.

4. Ukuba kukho uhlaziyo olulindileyo ngoko cofa ku Khuphela kwaye ufake uhlaziyo.

5. Nje ukuba uhlaziyo lukhutshelwe, lufake kwaye iWindows yakho iya kuhlaziywa.

6. Emva kokuba uhlaziyo lufakelwe qalisa kwakhona iPC yakho ukugcina utshintsho.

Method 5: Run Windows 10 BSOD Troubleshooter

If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).

1. Press Windows key + I to open Settings then click on ‘Uhlaziyo kunye noKhuseleko'

2. From the left pane, select ‘Iingxaki'

3. Skrolela ezantsi ukuya 'Khangela ulungise ezinye iingxaki' amacandelo.

4. Cofa ku 'Isikrini esiluhlaza' kwaye nqakraza ku'Qalisa i-troubleshooter'

Method 6: Give Graphics Card Access to the Application

1. Cofa iSitshixo seWindows + I ukuvula iiSetingi uze ucofe ku Inkqubo.

2. Kwimenyu esekhohlo khetha Bonisa emva koko ucofe Graphics settings link emazantsi.

3. Select the type of app, if you can’t find your app or game in the list then select the app Classic and then use the “Khangela incwadi"Ukhetho.

4. Navigate to your application or game, ukhethe, kwaye ucofe Vula.

5. Once the app is added to the list, click on it then again click on Khetha.

6. Khetha u-Ukwenza okuphezulu” and click on Save.

7. Qalisa kwakhona iPC yakho ukugcina utshintsho.

Method 7: Update BIOS (Basic Input/Output System)

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.

Method 8: Reset Overclocking Settings

If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.

Method 9: Faulty GPU

Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.

Indlela yesi-10: Jonga uBonelelo lwaMandla

A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Yiloo nto unayo ngempumelelo Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.