6 פעברואר 2018

Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Fix Computer does not start until restarted multiple times

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

מאַכן זיכער צו שאַפֿן אַ ומקערן פונט, נאָר אויב עפּעס גייט פאַלש.

נאטיץ: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

אופֿן 1: קער אַוועק שנעל סטאַרטאַפּ

1.דרוק Windows Key + R דעמאָלט טיפּ קאָנטראָל און שלאָגן אַרייַן צו עפענען קאָנטראָל פּאַנעל.

קאָנטראָל פּאַנעל

2.Click on ייַזנוואַרג און געזונט דעמאָלט גיט אויף מאַכט אָפּציעס.

מאַכט אָפּציעס אין קאָנטראָל טאַפליע

3. דערנאָך סעלעקטירן " פֿון די לינקס פֿענצטער שויב "קלייַבן וואָס די מאַכט קנעפּלעך טאָן."

קלייַבן וואָס די מאַכט קנעפּלעך טאָן וסב ניט דערקענט פאַרריכטן

4. איצט גיט אויף "טוישן סעטטינגס וואָס זענען דערווייַל אַנאַוויילאַבאַל."

טוישן סעטטינגס וואָס זענען דערווייַל אַנאַוויילאַבאַל

5. נעם אַוועק "קער אויף שנעל סטאַרטאַפּ"און גיט היט ענדערונגען.

ונטשעקק קער אויף שנעל סטאַרטאַפּ

אופֿן 2: לויפן אָטאַמאַטיק ריפּער

1.אַרייַנלייגן די Windows 10 באָאָטאַבלע ינסטאַלירונג ווי און ריסטאַרט דיין פּיסי.

2.When prompted to דרוק קיין שליסל צו שטיוול פֿון CD אָדער DVD, דריקן קיין שליסל צו פאָרזעצן.

דרוק יעדער קנעפּל צו שטיוול פֿון סי אָדער דיווידי

3. סעלעקט דיין שפּראַך פּרעפֿערענצן, און גיט ווייַטער. דריקט פאַרריכטן דיין קאָמפּיוטער אין די דנאָ-לינקס.

פאַרריכטן דיין קאָמפּיוטער

4. אויף קלייַבן אַן אָפּציע פאַרשטעלן, גיט טראָובלעשאָאָט.

קלייַבן אַן אָפּציע אין Windows 10 אָטאַמאַטיק סטאַרטאַפּ פאַרריכטן

5. אויף טראָובלעשאָאָט פאַרשטעלן, גיט אַוואַנסירטע אָפּציע.

אויסקלייַבן אַוואַנסירטע אָפּציע פון ​​טראָובלעשאָאָט פאַרשטעלן

6. אויף די אַוואַנסירטע אָפּציעס פאַרשטעלן, גיט אָטאַמאַטיק ריפּער אָדער סטאַרטאַפּ ריפּער.

לויפן אָטאַמאַטיק פאַרריכטן

7.ווייט ביז די Windows אָטאַמאַטיק / סטאַרטאַפּ ריפּערז גאַנץ.

8.ריסטאַרט און איר האָבן הצלחה Fix Computer does not start until restarted multiple times issue, אויב ניט, פאָרזעצן.

אויך לייענען ווי צו פאַרריכטן אָטאַמאַטיק ריפּער קען נישט פאַרריכטן דיין פּיסי.

אופֿן 3: באַשטעטיק בייאָוס צו פעליקייַט סעטטינגס

1.טורן אַוועק דיין לאַפּטאַפּ, דעמאָלט קער עס אויף און סיימאַלטייניאַסלי דריקן F2, DEL אָדער F12 (דיפּענדינג אויף דיין פאַבריקאַנט) צו אַרייַן בייאָוס סעטאַפּ.

דריקן DEL אָדער F2 שליסל צו אַרייַן בייאָוס סעטאַפּ

2.נאָוו איר וועט דאַרפֿן צו געפֿינען די באַשטעטיק אָפּציע לאָדן די פעליקייַט קאַנפיגיעריישאַן און עס קען זיין געהייסן ווי באַשטעטיק צו פעליקייַט, לאָדן פאַבריק דיפאָלץ, קלאָר בייאָוס סעטטינגס, לאָדן סעטאַפּ דיפאָלץ אָדער עפּעס ענלעך.

לאָדן די פעליקייַט קאַנפיגיעריישאַן אין בייאָוס

3. סעלעקט עס מיט דיין פייַל קיז, דריקן אַרייַן, און באַשטעטיקן די אָפּעראַציע. דיין בייאָוס וועט איצט נוצן זייַן פעליקייַט סעטטינגס.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

טשעק אויב קאָמפּיוטער שווער דיסק איז רעכט קאָננעקטעד

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

אופֿן 5: קוק די מאַכט צושטעלן

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

פאַולטי מאַכט צושטעלן

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

אופֿן 7: ATX באַשטעטיק

נאטיץ: דער פּראָצעס איז בכלל אַפּלייז צו לאַפּטאַפּס, אַזוי אויב איר האָבן אַ קאָמפּיוטער, לאָזן דעם אופֿן.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2.איצט אַראָפּנעמען די באַטאַרייע פון הינטער און דריקן און האַלטן די מאַכט קנעפּל פֿאַר 15-20 סעקונדעס.

אָפּשטעקן דיין באַטאַרייע

נאטיץ: דו זאלסט נישט פאַרבינדן די מאַכט שנור נאָך, מיר וועלן זאָגן איר ווען צו טאָן דאָס.

3.Now plug in דיין מאַכט שנור (באַטאַרייע זאָל ניט זיין ינסערטאַד) און פּרובירן צו באָאָטינג דיין לאַפּטאַפּ.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

רעקאַמענדיד:

אַז ס עס איר האָבן הצלחה Fix Computer does not start until restarted multiple times issue אָבער אויב איר נאָך האָבן קיין פֿראגן וועגן דעם פירער, פילן פריי צו פרעגן זיי אין די באַמערקונג אָפּטיילונג.