When you use an application or play games, and suddenly it freezes, crashes or exit followed by your PC screen going off and then turning back on again. And suddenly you see a pop-up error message saying “Display driver stopped responding and has recovered” or “Display driver nvlddmkm stopped responding and has successfully recovered” with driver info in details. The error is displayed when Timeout Detection and Recovery (TDR) feature of Windows determines that the Graphics Processing Unit (GPU) has not responded within the allowed time frame and have restarted the Windows Display Driver to avoid a full restart.
The main cause of Display driver stopped responding and has recovered error:
- Outdated, corrupted or incompatible Display Driver
- Faulty Graphic Card
- Overheating Graphics Processing Unit (GPU)
- TDR’s set timeout is less for the GPU to respond
- Too many running programs causing the conflict
These are all the possible causes that can trigger the “Display driver stopped responding and has recovered” error. If you started seeing this error more frequently in your system, it’s a serious issue and needs troubleshooting, but if you see this error once in a year, it’s not a problem, and you can continue to use your PC normally. So without wasting any time, let’s see how to actually fix this error with the below-listed troubleshooting steps.
Display driver stopped responding and has recovered error [SOLVED]
確保建立一個還原點,以防出現問題。
方法一:卸載顯示卡驅動
1. 右鍵單擊設備管理器下的 NVIDIA 顯卡,然後選擇 卸載。
2. 如果要求確認,請選擇是。
3. 按 Windows 鍵 + X,然後選擇 控制面板。
4. 在控制面板中,點擊 卸載程序。
5。 下一個, 卸載與 Nvidia 相關的所有內容。
6. 重新啟動系統以保存更改並 再次下載設置 從製造商的網站。
5. 一旦你確定你已經刪除了所有東西, 嘗試再次安裝驅動程序. 設置應該可以正常工作。
方法 2:更新顯卡驅動程序
1. 按 Windows 鍵 + R 然後輸入 鍵入devmgmt.msc and hit enter to open Device Manager.
2.接下來,展開 顯示適配器 and right-click on your Nvidia Graphic Card and select 啟用。
3. Once, you have done this again, right-click on your graphic card and select “更新驅動程序軟件。“
4。 選擇 ”自動搜索更新的驅動程序軟件” and let it finish the process.
5. If the above step could fix your problem, then very good, if not then continue.
6. Again select “更新驅動程序軟件” but this time on the next screen select “瀏覽我的電腦以獲取驅動軟件。“
7. Now. select “讓我從我的電腦上的設備驅動程序列表中選擇“
8. Finally, select the compatible driver from your 英偉達顯卡 list and click Next.
9. Let the above process finish and restart your PC to save changes. After updating the Graphic card, you may be able to Fix Display driver stopped responding and has recovered error.
Method 3: Adjust visual effects for better performance
Too many programs, browser windows or games open at the same time can use up a lot of memory and thus cause the above error. To fix this issue, try to close as many programs and windows that are not in use.
Increasing the performance of your system by disabling visual effects can also help to resolve Display driver stopped responding and has recovered error:
1. Right-click on This PC or My Computer and select 屬性。
2。 然後點擊 高級系統設置 從左側菜單。
注意: You could also directly open Advanced system settings by pressing Windows Key + R then type SYSDM.CPL 並按Enter鍵。
3.切換到 “高級”選項卡 if not already there and click Settings under 性能。
4. Now select the checkbox which says “調整以獲得最佳性能。“
5. 按一下應用,然後按一下 確定。
6. 重新啟動您的 PC 以保存更改。
Method 4: Increase GPU processing time (Registry Fix)
1. 按 Windows 鍵 + R 然後輸入 註冊表編輯器 並按 Enter 打開註冊表編輯器。
2. 導覽至以下註冊表項:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlGraphicsDrivers
3. Make sure you have highlighted GrphicsDivers from the left-hand window pane and then right-click in an empty area in the right window pane. Click 全新 and then select the following registry value specific to your version of Windows (32 bit or 64 bit):
對於 32 位 Windows:
一種。 選擇 DWORD(32位)值 和類型 TdrDelay as the Name.
b. Double click on TdrDelay and enter 8 in the Value data field and click OK.
對於 64 位 Windows:
一種。 選擇 QWORD (64-bit) Value 和類型 TdrDelay as the Name.
b. Double click on TdrDelay and 輸入8 in the Value data field and click OK.
4. Close the Registry Editor and reboot your PC to save changes.
Method 5: Update DirectX to the Latest Version
To Fix Display driver stopped responding and has recovered error, you should always update your DirectX. The best way to make sure you have the latest version installed is to download DirectX Runtime Web Installer from Microsoft’s official website.
Method 6: Make Sure the CPU and GPU are not Overheating
Make sure that the temperature of the CPU and GPU do not exceed the maximum operating temperature. Make sure the heatsink or fan is being used with the processor. Sometimes excessive dust can cause overheating issues, so it’s advised to clean out the vents and graphic card to fix this issue.
Method 7: Set Hardware to Default Settings
An overclocked processor (CPU) or Graphics card can also cause the “Display driver stopped responding and has recovered” error and to resolve this make sure you set the Hardware to default settings. This will ensure that the system is not overclocked and the hardware can function normally.
Method 8: Faulty Hardware
If you’re still unable to fix the above error, then it may be because the graphic card is faulty or damaged. To test your hardware, take it to a local repair shop and let them test your GPU. If it’s faulty or damaged replace with a new one and you will be able to fix the issue once and for all.
推薦:
這樣你就成功了 Fix Display driver stopped responding and has recovered error [SOLVED] 但如果您對這篇文章仍有任何疑問,請隨時在評論部分提出。