Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

確保建立一個還原點，以防出現問題。

注意： Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

方法八：關閉快速啟動

1.按 Windows 鍵 + R，然後輸入 control 並按 Enter 鍵開啟 控制面板。

2。點擊 硬件和聲音 然後點擊 電源選項.

3.然後從左側窗格中選擇“選擇電源按鈕的功能。“

4.現在點擊“更改當前不可用的設置。“

5.取消勾選“打開快速啟動”，然後單擊保存更改。

方法 2：運行自動修復

1.插入 Windows 10 可啟動安裝 DVD 並重新啟動您的電腦。

2.當出現提示時 按任意鍵 若要從 CD 或 DVD 啟動，請按任一鍵繼續。

3.選擇您的語言首選項，然後單擊下一步。 單擊修復 你的電腦在左下角。

4.在選擇選項屏幕上，單擊 疑難解答.

5.在疑難解答屏幕上，單擊 高級選項.

6.在高級選項屏幕上，單擊 自動修復或啟動修復.

7.等到 Windows 自動/啟動修復 完成。

8.重啟就成功了 Fix Computer does not start until restarted multiple times issue, 如果沒有，請繼續。

另外，請閱讀 如何修復“自動修復”無法修復您的電腦。

方法 3：將 BIOS 重設為預設設置

1.關閉你的筆記本電腦，然後同時打開它 按 F2、DEL 或 F12 （取決於您的製造商）進入 BIOS 設置。

2.現在你需要找到重置選項 加載默認配置 它可能被命名為重置為默認值、加載出廠默認值、清除 BIOS 設置、加載設置默認值或類似名稱。

3.用箭頭鍵選擇它，按Enter，然後確認操作。 您的 的BIOS 現在將使用它的 默認設置。

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

方法九：檢查電源

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

方法7：ATX重置

注意： 此過程通常適用於筆記型電腦，因此如果您有計算機，請保留此方法。

1.Power off your laptop then remove the power cord, leave it for few minutes.

2.現在 取出電池 從後面按住電源按鈕 15-20 秒。

注意： 暫時不要連接電源線，我們會告訴您何時執行此操作。

3.Now plug in 你的電源線 （不應插入電池）並嘗試啟動您的筆記型電腦。

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

推薦：

這樣你就成功了 Fix Computer does not start until restarted multiple times issue 但如果您對本指南仍有任何疑問，請隨時在評論部分提出。