Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”
Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually fix Error code 0x00028001 and error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.
Fix Error code 0x80070035 The network path was not found
確保建立一個還原點,以防出現問題。
方法 1:暫時禁用防病毒和防火牆
1.右鍵單擊 防病毒程序圖標 從系統托盤中選擇 禁用。
2.接下來,選擇時間範圍 防病毒軟件將保持禁用狀態。
注意:選擇盡可能短的時間,例如 15 分鐘或 30 分鐘。
3.Once done, again check if the error resolves or not.
4.按 Windows 鍵 + I,然後選擇 控制面板。
5.下一步,點選 系統和安全。
6.然後點擊 Windows 防火牆。
7. 現在,從左側窗格中按一下「開啟或關閉 Windows 防火牆」。
8.選擇關閉 Windows 防火牆並重新啟動您的 PC。 And see if you’re able to Fix Error code 0x80070035 The network path was not found.
如果上述方法不起作用,請確保按照完全相同的步驟再次開啟防火牆。
Method 2: Delete Hidden Network Adapters
1.按Windows鍵+ R然後輸入 鍵入devmgmt.msc 然後按Enter打開 裝置經理。
2.現在選擇 網絡適配器 然後單擊 查看 > 顯示隱藏的設備。
3.Right-click on each of the hidden devices and select 卸載設備。
4.Do this for all the hidden devices listed under Network Adapters.
5.重新啟動您的 PC 以保存更改。
Method 3: Turn ON Network Discovery
1.按 Windows 鍵 + X 然後選擇 控制面板。
2.Now click Network and Internet and then click View network status and tasks.
3.This would take you to Network and Sharing Center, from there click 更改高級共享設置 從左側菜單。
4.Check mark 開啟網絡發現 and click Save changes.
5.重新啟動您的電腦以儲存變更並查看是否能夠 Fix Error code 0x80070035 The network path was not found.
Method 4: Enable NetBIOS over TCP/IP
1.按Windows鍵+ R然後輸入 ncpa.cpl 並按Enter鍵。
2.Right-click on your active Wi-Fi or ethernet connection and select 屬性。
3.Select 版本4 Internet協議(TCP / IPv4) 並單擊屬性。
4.現在點擊 高級 in the next window and then switch to WINS tab under Advanced TCP/IP Settings.
5.Under NetBIOS setting, check mark “通過TCP / IP啟用NetBIOS“, and then click OK.
6.重新啟動電腦以儲存更改
Method 5: Manually enter all PC’s username and password over the network
1.按 Windows 鍵 + X 然後選擇 控制面板。
2.類型 憑據 in the control panel search and click on 憑證管理員。
3.Select Windows憑據 然後點擊 Add a Windows credential.
4.One by one type the 用戶名和密碼 of each machine connected to the network.
5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.
1.Right-click on the drive which you want to be shared and select 屬性。
2.切換到 共享選項卡 and if under Network Path it says Not Shared then click on Advanced Sharing button.
3.Check mark “共享該文件夾” and make sure the Share name is correct.
4.單擊應用,然後單擊確定。
Method 7: Change Network Security settings
1.按Windows鍵+ R然後輸入 輸入secpol.msc 並按Enter鍵。
2.Navigate to the following path under Local Security Policy window:
Local Policies > Security Options > Network security: LAN Manager authentication level
3.雙擊 網路安全:LAN Manager 驗證級別 in the right-hand side window.
4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.
5.單擊應用,然後單擊確定。
Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.
方法 8:重置 TCP/IP
1.右鍵單擊Windows按鈕並選擇“命令提示符(管理員)。“
2.Now type the following command and press enter after each one:
(a) ipconfig /發布
(b) ipconfig /flushdns
(c) ipconfig /更新
3.再次開啟管理命令提示字元並鍵入以下內容,並在每一項後按 Enter 鍵:
- IPCONFIG / FLUSHDNS的
- nbtstat -r
- netsh int ip reset
- netsh winsock重置
4.重新啟動以應用更改。
為你推薦:
這樣你就成功了 Fix Error code 0x80070035 The network path was not found 但如果您對這篇文章仍有任何疑問,請隨時在評論部分提出。