Intel Wireless AC 9560 is the most dedicated Wi-Fi adapter of Intel. If this network adapter fails to work on your device, you cannot connect to any network. This issue is often accompanied by an error code of 10 or 45 if you check the properties of this network adapter. If you are also facing Intel Wireless AC 9560 not working issue on your Windows 10 PC, you can easily troubleshoot the same by following the below-listed hacks. So, continue reading to fix Intel Wireless AC 9560 code 10 error.
How to Fix Intel Wireless AC 9560 Not Working
You may wonder why this problem occurs on your Windows 10 PC. Here are some valid reasons that trigger this problem in your device.
- Router configuration is not proper.
- 網路連線很差。
- The cable connecting the router and the modem is damaged or broken.
- 太多人連接到同一網路。
- Wireless interference between the router and your device.
- 過時的網絡驅動程序。
- Other background processes are consuming too many CPU resources from your PC.
- Incompatible proxy/ TCP configuration settings.
- The DNS addresses are not appropriate.
- Few essential Windows services like WLAN Autoconfig are not enabled on your device.
- Corrupt components on PC and presence of malware.
- The Operating system version is not compatible with the latest version of the driver.
Here are a few troubleshooting ideas that will help you fix the issue. Follow them in the same order to attain the best results.
注意: Few steps in this guide are demonstrated with some other Wireless adapters. Follow the steps for 英特爾無線交流9560 driver accordingly.
方法一:基本故障排除方法
Before going through the advanced troubleshooting methods, follow these basic methods to fix the issue.
1A。重新啟動電腦
If there are any temporary glitches in your PC, you will face Intel Wireless AC 9560 code 10. The general trick to resolve all the temporary glitches is to restart your computer. You can restart your PC by following the steps.
1.點擊 Windows + D 鍵 一起去 桌面.
2. 現在,按 Alt + F4 鍵 同時進行。
3.然後,選擇 重新啟動 option from the drop-down menu and hit Enter.
1B.確保網路連線正常
Unstable internet connection leads to Intel Wireless AC 9560 not working code 10, also if there are any obstacles between your router and your computer, they may interfere with the wireless signal and will cause intermittent connection problems. You can run a SPEEDTEST 了解正確連線所需的最佳網路速度等級。
確保您的設備符合以下標準。
- 尋找網路的訊號強度,如果訊號強度非常低,請清除中間的所有障礙物。
- 避免太多設備連接到同一網路。
- 請務必購買經過網路服務供應商 (ISP) 驗證的數據機/路由器,它們不會發生衝突。
- 不要使用 舊的、破損的或損壞的電纜。 如有必要,請更換電纜。
- 確保從數據機到路由器以及數據機到牆壁的電線穩定且不受干擾。
相關閱讀: 修復 Windows 10 中找不到 WiFi 網路的問題
1C. Run Network Troubleshooter and Reset TCP/IP
To fix various internet connectivity issues, you can use the inbuilt tool provided in Windows 10 PC whenever needed. By using the Windows network troubleshooter tool, you can analyze and diagnose any common network-related issues. It is a systematic process, when implemented step by step, will help you fix Intel Wireless AC 9560 keeps disconnecting problem.
Follow our guide How to Troubleshoot Network Connectivity Problems on Windows 10 to learn basic troubleshooting steps to fix all network-related issues by using the Windows Network Adapter troubleshooter.
You can use the steps mentioned in the guide to diagnose Wi-Fi connections, Ethernet, and all network adapters in your Windows 10 PC. Finally, check if you have fixed the discussed error or not.
1D。關閉後台進程
Several users have confirmed that Intel Wireless AC 9560 not working issue can be resolved by closing all the background tasks running on your PC. To implement the task, follow our guide How to End Task in Windows 10 and proceed as instructed.
Once you have closed all the background processes, check if you were able to fix the issue or not.
1E。修復系統檔案
If there are any corrupt system files in your Windows Operating system, your PC may face a lot of internet connectivity issues. If you are experiencing Intel Wireless AC 9560 code 10 very recently, there are some chances that your computer files have become corrupt or damaged.
幸運的是,您的 Windows 10 PC 具有內建修復工具,例如 SFC(系統檔案檢查器)和 DISM(部署映像服務和管理),可協助您修復所有損壞的檔案。
閱讀我們的如何修復 Windows 10 上的系統檔案指南,並按照說明的步驟修復所有損壞的檔案。
相關閱讀: 修正 Windows 10 Netwtw04.sys 藍色畫面錯誤
1F. Use Google DNS
Domain Name System (DNS) addresses are responsible to establish a network connection between the client and server-side. Many technical experts have suggested that using Google DNS addresses helped them to fix Intel Wireless AC 9560 not working issue. To do so, follow our guide on How to change DNS settings in Windows 10.
1G. Disable Proxy Server
Sometimes, inappropriate network configurations on your Windows 10 computer, you will face Intel Wireless AC 9560 code 10 issue. If you have installed any VPN service or use proxy servers on your PC, read out How to Disable VPN and Proxy on Windows 10 and implement the steps as instructed in the article.
After disabling the VPN client and proxy servers, check if you have fixed the discussed issue. Still, if you face the same problem, try connecting to a 移動熱點。
After implementing the steps, check if you can fix Intel Wireless AC 9560 not working or not.
相關閱讀: 修正 Windows 10 中電腦未顯示在網路上的問題
1H。更新Windows
You can also eradicate Intel Wireless AC 9560 keeps disconnecting on your computer by updating your Operating System. Always ensure if you have updated your Windows Operating System and if there are any updates pending in action, use our guide How to Download and Install Windows 10 Latest Update.
After updating your Windows Operating System, check whether you can connect to your network adapter.
1I. Run Malware Scan
Sudden virus or malware attack will result in Intel Wireless AC 9560 not working code 10 issue on your computer. If in case, the virus attack is very severe, you cannot connect to any network continuously at all. To resolve the problem, you have to remove the virus or malware completely from your Windows 10 computer.
建議您按照我們的指南中的說明掃描您的電腦 如何在我的電腦上執行病毒掃描?
另外,如果您想刪除電腦中的惡意軟體,請查看我們的指南如何在 Windows 10 中從您的電腦中移除惡意軟體。
Method 2: Enable WiFi from Settings
Intel Wireless AC 9560 code 10 will hide the internet icons from the main menu and you cannot use them as you do regularly. If you cannot see WiFi in the Taskbar, you can enable it from the settings menu as instructed below.
1。 按 Windows + I鍵 一起開 Windows設定.
2。 現在,點擊 網絡與互聯網 設定如圖所示。
3. Now, in the left pane click on the Wi-Fi 標籤並在 Wi-Fi 按鈕。
相關閱讀: 修復 Windows 無法自動偵測該網路的代理程式設置
Method 3: Regenerate IP Address
Some internet tasks won’t function on public IP addresses due to security concerns, and as a result, they temporarily freeze the account. Follow these steps to reset the IP address and fix Intel Wireless AC 9560 code 10.
1。 按 Windows鍵 和類型 命令提示符 在搜索框中。
2。 右鍵單擊 命令提示符 並選擇 以管理員身份運行.
3。 點擊 是 to give permission.
4. 輸入以下內容 命令 one after the other and hit 回車鍵 在每個命令之後。
Ipconfig / flushdns ipconfig / release命令 使用ipconfig / renew
5. Execute the following 命令 to fix any wrong network configuration:
netsh int ip reset netsh winsock重置
6. After entering the commands, 重新啟動電腦.
Method 4: Re-enable Wi-Fi Cards
Sometimes, if the Wi-Fi adapters are not enabled on your PC, you will face Intel Wireless AC 9560 keeps disconnecting issue. But there are a few simple instructions to enable WiFi adapters on your computer.
1。 打開 跑 對話框按 Windows + R密鑰 在一起。
2. 現在,輸入 ncpa.cpl 並擊中 回車鍵 推出 “網絡連接”.
3. 現在,右鍵單擊您的活動 網絡適配器 並檢查它是啟用還是停用。
4。 點擊 啟用 如果狀態為停用。
注意: If the status is already in Enable, move to the next method.
Check if you have fixed Intel Wireless AC 9560 issue or not.
相關閱讀: 修復乙太網路沒有有效 IP 設定錯誤
Method 5: Disable & Enable Intel Wireless AC 9560 Adapter
Sometimes, a small temporary glitch in your network adapters can cause Intel Wireless AC 9560 not working code 10 issue. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1.點擊 Windows鍵 和類型 “設備管理器” 在 Windows 搜尋功能表中。點選 已提交 如圖所示。
2. 現在,展開 網絡適配器 雙擊該部分。
3. 然後,右鍵單擊 英特爾無線交流9560 driver and select the 禁用設備 選項。
注意: 我們已經證明了 Qualcomm Atheros QCA9388無線網絡適配器 舉個例子。
4. Then, confirm the below prompt by clicking on 是.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, right-click on 英特爾無線交流9560 並選擇 啟用設備 如圖所示。
Finally, check if the issue with your driver is fixed or not.
Method 6: Start WLAN AutoConfig Service
A ton of services will run in the background whenever you boot your Windows 10 PC. One among them is the WLAN AutoConfig service which is responsible for WiFi services. If this service is disabled, you may face Intel Wireless AC 9560 keeps disconnecting issue and what you need to do is to restart the service as instructed below.
1。 轉到 在此輸入以進行搜索 field in the bottom left corner of the screen and type 服務 如圖所示。然後,點擊 已提交.
2. 現在,搜尋 WLAN 自動配置服務 並雙擊它。
注意: You can also right-click on WLAN 自動配置服務 並選擇 氟化鈉性能 下拉列表中的選項。
3. 現在,選擇 “啟動類型” as Automatic 自動錶.
3A。如果 服務狀態 是不 運行,然後點擊 開始 按鈕。
3B。如果 服務狀態 is 運行,按一下 停止 button for a while and Start it again.
4.最後,點擊 申請>確定 保存更改。
相關閱讀: 如何在 Windows 10 上設定網路檔案共用
方法一:禁用省電模式
Sometimes, you may face Intel Wireless AC 9560 not working code 10 issue if you have enabled power-saving mode in your Windows 10 computer. This leads to several network connectivity problems. We advise you to disable power saving mode as instructed below.
1。 發射 “設備管理器” by typing it in the Windows 10 search menu and clicking on 已提交.
2. 現在,雙擊 網絡適配器 部分。
3. 然後,右鍵單擊 英特爾無線交流9560 並選擇 氟化鈉性能 如圖所示。
4. 然後,切換到 電源管理應用 視窗中的 網路介面卡屬性 視窗並取消選取旁邊的框 讓計算機關閉此設備以節省電量.
5.最後,點擊 OK 保存更改。
Method 8: Update Intel Wireless AC 9560 Driver
Device drivers establish a connection link between the hardware and Operating System of your computer. Also, faulty or corrupt drivers lead to Intel Wireless AC 9560 keeps disconnecting issue. Many users have reported that updating all WLAN drivers have helped them fix the issue.
Option I: Update Network Driver
You are advised to update WLAN drivers to improve the reliability of your network adapters, fix compatibility issues, and resolve the discussed issue. Follow our guide on How to Update Network Adapter Drivers on Windows 10 to do so.
Option II: Roll Back Driver Updates
When you roll back your drivers, all the current versions of the hardware device will be uninstalled and previously installed drivers will be installed on your PC. This feature will be very helpful when any new driver update does not work well with your computer. Follow the steps as instructed in our guide How to Rollback Drivers on Windows 10 to fix the discussed issue.
After your Windows 10 computer has installed the previous version of drivers, check if you have fixed the discussed problem.
Method 9: Reinstall Intel Wireless AC 9560 Driver
Incompatible drivers must be reinstalled to fix Intel Wireless AC 9560 not working code 10. You are advised to reinstall device drivers only if you cannot attain any fix by updating them. Steps to reinstall drivers are very easy and you can do so by using a third-party application or manually.
Follow our guide How to Uninstall and Reinstall Drivers on Windows 10 on your Windows 10 computer.
重新安裝網路驅動程式後,檢查是否已解決所討論的問題。
相關閱讀: 修正 Windows 0 上的網路錯誤 00028001x10
方法10:重置網絡設置
Several users have declared that, resetting network settings will resolve strange network connection issues. This method will forget all the network configuration settings, saved credentials, and a lot more security software like VPN and antivirus programs.
To do so, follow our guide on How to Reset Network Settings on Windows 10
Method 11: Reset BIOS to Default
There are several customization settings in BIOS of your system in order to improve the system performance. Some activities like overclocking and caching might change any default settings and thus contributing to the said problem. Yet, the easiest way to tackle the problem is to reset the BIOS to default. Here is how to do that.
1. Restart your system and hold F2鍵 while pressing the Power button.
注意: The combinational keys to turn on BIOS settings might vary according to the system model you use. You are advised to make sure which combinational keys work on your PC. Read 6 Ways to Access BIOS in Windows 10 (Dell/Asus/ HP) here.
2。 導航到 Advanced BIOS section 並選擇 Reset Configuration Data.
3。 最後,選擇 保存並退出 選項。
方法12: 執行系統還原
If you have recently updated your Windows 10 operating system and later facing Intel Wireless AC 9560 not working code 10, the latest Windows update components may interfere with any software present in your computer and may cause the discussed issue. So, in this case, you must restore your computer to the previous version when it was working fine.
To do so, follow our guide on How to use System Restore on Windows 10 and implement the instructions as demonstrated.
After restoring your Windows 10 PC, check if you can connect to any network adapter without any problems.
相關閱讀: 修正 Windows 10 上的網路不斷斷線的問題
方法 13:重設電腦
If none of the methods have helped you fix Intel Wireless AC 9560 code 10, then you have to clean install your Windows Operating System. To clean boot your computer, implement the steps as instructed in our guide How to do a Clean Install of Windows 10
Last but not the least, you have to seek for technical support if above listed methods fail to resolve Intel Wireless AC 9560 not working. If your modem does not communicate with your Internet Service Provider, a lot more technical connectivity problems arise in your device. The Internet Service Providers will check whether the devices are updated, compatible and properly registered.
推薦:
我們希望本指南對您有所幫助,並且您可以 fix Intel Wireless AC 9560 not working issue in Windows 10. Let us know what you want to learn about next. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.