When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- 病毒或惡意軟件攻擊。
- 過時的操作系統。
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe 圖標。
2. If the status is set to 未連接,按一下 Network globe icon, choose your Wi-Fi network and click on 連結 button. Make sure 飛行模式 沒有打開。
3. If you again face the same network connection error code, then click on the 斷開 button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5.右鍵單擊 無線網絡圖標 並選擇 打開網絡和Internet設置。
6。 點擊 Wi-Fi.
7. Scroll down the right menu, click on 管理已知網絡.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select 忘記。
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
方法一:重啟路由器
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
注意: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1。 找出 電源按鈕 在路由器的背面。
2. 按一次按鈕 把它關掉。
3.現在, 斷開 Router power cable 等待電容器的電量完全耗盡。
4。 然後, 重新連接 電源線 一分鐘後將其打開。
5. 等待網路連線重新建立並 嘗試重新登入.
相關閱讀: 修正 Windows 10 中電腦未顯示在網路上的問題
方法3:運行網絡疑難解答
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1.點擊 Windows鍵 和類型 對設置進行故障排除 在搜索欄中和 打開。
2。 點擊 其他疑難解答.
3。 選擇 網絡適配器 並點擊 運行疑難解答.
4. Select the network adapter to diagnose 並點擊 下一頁.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is 故障排除無法確定問題, 點擊 關閉疑難解答.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
相關閱讀: 修復家庭共享 YouTube TV 無法正常運作的問題
方法五:修復系統文件
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (系統文件檢查器) /DISM (部署映像服務和管理) utilities on your Windows 10 PC.
1.點擊 Windows鍵,輸入 命令提示符 並點擊 以管理員身份運行.
2。 點擊 是 ,在 用戶帳戶控制 及時。
3。 類型 chkdsk C:/ f / r / x 命令並擊中 回車鍵.
4. 如果出現訊息提示, Chkdsk 無法運作...該磁碟區...正在使用過程中,然後輸入 Y 並擊中了 回車鍵.
5. 再次輸入命令: SFC / SCANNOW 並按下 回車鍵 運行 系統文件檢查器 掃描。
注意: 將啟動系統掃描,需要幾分鐘才能完成。同時,您可以繼續執行其他活動,但請注意不要意外關閉視窗。
完成掃描後,它將顯示以下訊息之一:
- Windows資源保護未發現任何完整性違規。
- Windows 資源保護無法執行要求的操作。
- Windows資源保護髮現損壞的文件並成功修復它們。
- Windows資源保護髮現損壞的文件但無法修復其中一些。
6. 掃描完成後, 重新開始 您的電腦.
7.再次啟動 命令提示符為管理員 並依序執行給定的命令:
dism.exe /在線 /cleanup-image /scanhealth dism.exe /在線 /cleanup-image /restorehealth dism.exe /在線 /cleanup-image /startcomponentcleanup
注意: 您必須有有效的網路連線才能正確執行 DISM 命令。
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1.點擊 Windows鍵 和類型 “設備管理器” in the Windows search menu. Click on 已提交.
2。 展開 網絡適配器 雙擊該部分。
3. 右鍵單擊您的 網絡驅動程序 (例如, Intel (R) Dual Band Wireless-AC 3168) 並選擇 禁用設備 選項。
4. Confirm the below prompt by clicking on 是.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the 啟用設備 選項。
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
相關閱讀: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. 前往搜尋選單並輸入 CMD。 點擊 以管理員身份運行.
2. 輸入以下內容 命令 並擊中了 回車鍵.
netsh winsock重置 netsh int ip reset ipconfig / release命令 使用ipconfig / renew
3. 等待指令執行完畢 重啟你的電腦.
Method 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1。 發射 命令提示符 by searching in the Windows 目錄 and click on Run as administrator.
2。 類型 IPCONFIG / FLUSHDNS的 in the command window and hit Enter.
相關閱讀: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1。 啟動 跑 對話框按 Windows + R密鑰 在一起。
2。 類型 ncpa.cpl 並擊中 回車鍵.
3. Right-click on your active 網絡適配器 並點擊 氟化鈉性能.
4。 取消選中 Internet協議版本6(TCP / IPv6) 選項。
5.最後,點擊 OK to save the changes and check if the issue is resolved.
注意: If you use multiple network connections, navigate to 網絡和共享中心 和 更換適配器 settings. Right-click on the adapter and select 禁用. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1。 類型 “設備管理器” in the Windows search menu and click 已提交.
2。 雙擊 網絡適配器 擴大它。
3. 右鍵單擊您的 司機 (例如 英特爾(R)雙頻無線交流3168) 並單擊 更新驅動程序.
4。 點擊 瀏覽我的計算機以獲取驅動程序 to locate and install a driver manually.
5。 點擊 點針式 button to choose any directory and click on 下一頁.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, 最適合您裝置的驅動程式已安裝.
6。 點擊 關閉 退出窗口。
7. 重新啟動 the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1。 發射 “設備管理器” from the Windows search menu.
2.右鍵單擊 司機 並選擇 卸載設備.
3. A warning prompt will be displayed on the screen. Check the box “刪除此設備的驅動程序軟件” and confirm the prompt by clicking 卸載.
4. Download and install the drivers on your device either by a manual update or automatic update.
5。 訪問 製造商的網站.
2. 發現 和 下載 與您 PC 上的 Windows 版本相對應的驅動程式。
3. Once downloaded, double click on the 下載的文件 and follow the given instructions to install it.
相關閱讀: How to set up a VPN on Windows 10
方法 10:更新 Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1。 按 的Windows + I 鍵 一起開 設定 在你的電腦上
2。 選擇 更新與安全.
3。 選擇 檢查更新.
4A. Click 立即安裝 to download and install the latest update available.
4B. If your system is already up-to-date, then it will show 你是最新的 信息。
方法 11:卸載最近的更新
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1。 按下並按住不動 Windows + R密鑰 一起打開 跑 對話框。
2。 類型 APPWIZ.CPL 並擊中 Enter.
3。 點擊 查看已安裝的更新“.
4. Select the most recent update and click on 卸載.
5. Confirm the prompt, if any, and 重新啟動電腦.
相關閱讀: How to Fix Firefox Not Loading Pages
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the 網絡適配器 installed in your PC along with their settings. All the stored settings are stored to default settings.
注意: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to 設定 然後 系統 和 關於我們. Once you have reset your network, you have to reinstall all networking software 点讚 VPN客戶端 or 虛擬交換機.
1。 按下並按住不動 Windows + I鍵 一起開 Windows設置.
2。 點擊 網絡與互聯網.
3。 點擊 網絡重置 下 Status.
4. 點選確認提示 立即重置.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
推薦:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.