If you are a person who loves to play around with the programs on your phone, you might be aware of the TWRP mount internal storage. This is an official app from the Google Play Store and can help in installing third-party apps and software.
One of the issues with the mode is TWRP internal storage 0MB. Though you might have enough space to flash new files on your phone, you may see this error message pop up on your phone. In this case, you might be unable to mount storage TWRP on your Android phone. There are various reasons for this issue and you might be denied access to the unofficial software files and other custom ROMs. You can use the method in the article to fix TWRP unable to mount storage issue.
How to Fix Unable to Mount Storage TWRP on Android
TWRP Recovery mode is used to install and back up the files on your phone instantly. It is available as an app in the Google Play Store and is a trusted app.
注意: The steps mentioned correspond to the Samsung Galaxy A21 s model and the settings are bound to differ according to the phone model and manufacturer.
How to Install TWRP Recovery Mode App
Here are the steps to install TWRP recovery mode application.
請參見:
Fix Google Photos not uploading photos on Android
Fix Tinder Matches Disappeared on Android
如何在 Android 上知道 AirPods 是否正在充電
1. From the menu, open the Play商店 應用程序。
2。 點擊 搜索欄 在主頁頂部。
3. 搜索 TWRP recovery mode 然後點擊 搜索 圖標。
4。 點擊 安裝 的按鈕 TWRP官方應用.
What Causes TWRP Unable to Mount Storage Issue?
The issue of being unable to mount internal storage may be due to the following reasons as below.
- Security Password- The security password or the lock password on your phone may not allow you to mount the storage files.
- Unsupported File is installed- A zip file that is unsupported with your phone model installed on your phone may be a reason for this issue.
- Unable to decrypt files in partition- Your phone may not able to decrypt the files in the Partition drives on your phone.
- Flashing a wrong file in Partition drive- An incorrect or wrong file may be flashed to the Partition drives on your phone.
- Corrupt Files in Partition drive- The files in the partition drives on your Phone may be corrupt or have some malware.
- Factory reset option is corrupt- The issue may occur if the Factory reset option on your phone is corrupt.
相關閱讀: 修復 Android 正在開始優化應用程式 1 of 1
Following are the troubleshooting methods to fix unable to mound storage TWRP on your Android device.
Method 1: Change Screen Security Password
The simplest approach to fix the unable to mount storage TWRP issue is to change the security password of your phone.
1. From the menu, open the 設定 應用程序。
2。 點擊 鎖屏 標籤。
3。 點擊 鎖屏類型 標籤。
4. Enter your current password or draw your current pattern on the confirmation screen.
5。 點擊 密碼: 標籤。
注意: Alternatively, you can tap on the 密碼 標籤。
6. Type any alpha-numeric password and tap on the 繼續 選項。
7. Type the same alpha-numeric password and tap on the OK 選項。
Now, check if TWRP internal storage 0mb is resolved.
Method 2: Use Micro SD Card
This method is a little workaround but can be used to fix the issue of TWRP mount internal storage. Using this method, you can move the files of the partition drives to a Micro SD Card on your phone.
1.長按 強大能力 按鈕並點擊 關閉電源 選項。
2。 按 電源+音量降低 按鈕啟動進入 TWRP 恢復模式。
3。 點擊 Keep Read Only button and swipe the triple arrow icon or the Swipe to Allow Modifications 右邊的選項。
4. 接下來,點擊 安裝 在選項 球隊獲勝回收項目 屏幕上。
5. 然後,點擊 選擇存儲 標籤。
6。 選擇 Micro SD卡 option in the menu. Then, check if TWRP unable to mount storage is resolved.
相關閱讀: 如何在沒有 Root 的情況下更改 Android 上的 IMEI 號碼
Method 3: Format Data
If you are not able to fix unable to mount storage TWRP issue, you can format the data on your phone in the Team Win Recovery Project mode.
注意: You can back up the files on your Phone to Google Drive before proceeding with this method to avoid loss of data.
1。 持有 強大能力 按鈕並點擊 關閉電源 選項。
2。 按 功率+調低音量 按鈕啟動進入 TWRP 恢復模式。
3。 點擊 Keep Read Only button and swipe the triple arrow icon or the Swipe to Allow Modifications 右邊的選項。
4。 點擊 擦拭 在選項 球隊獲勝回收項目 屏幕上。
5。 點擊 格式化數據 按鈕。
6。 類型 是 ,在 Wipe Format Data 屏幕並點擊 Enter 選項。
7. 返回 球隊獲勝回收項目 屏幕並點擊 重新啟動 選項。
8。 點擊 系統 option to turn on your phone.
Finally, check if TWRP internal storage 0mb issue is resolved.
Method 4: Format Internal Storage
Another option to fix unable to mount storage TWRP issue is to format the internal storage on your phone.
Step I: Backup Files on Internal Storage
The first step is to back up the files on your Internal Storage partition drive in the twrp recovery mode.
1。 按 強大能力 按鈕並點擊 關閉電源 選項。
2。 按 電源+音量降低 按鈕啟動進入 TWRP 恢復模式。
3。 點擊 Keep Read Only button and swipe the triple arrow icon or the Swipe to Allow Modifications 右邊的選項。
4. 然後,點擊 備份 在選項 球隊獲勝回收項目 屏幕上。
5。 選擇 內部存儲 在選項 選擇存儲 屏幕並點擊 OK 按鈕。
6. Select all the partitions and swipe the triple arrow icon or the 滑動擦拭 option to the right to confirm the selection.
Step II: Format Internal Storage
The next step is to format the files on the Internal Storage partition drive in the TWRP recovery mode.
1。 打開 球隊獲勝回收項目 應用,然後點擊 擦拭 選項。
2。 點擊 高級擦除 選項。
3。 選擇 內部存儲 在選項 Select Partition to Wipe section and swipe the triple arrow icon or the 滑動擦拭 option to the right to confirm the selection.
相關閱讀: What is HTC S-OFF?
方法五:修復系統文件
To fix the unable to mount storage TWRP issue, you can repair the system files on your phone in the TWRP recovery mode.
1。 持有 強大能力 按鈕並點擊 關閉電源 選項。
2. 然後,按 電源+音量降低 按鈕啟動進入 TWRP 恢復模式。
3。 點擊 Keep Read Only button and swipe the triple arrow icon or the Swipe to Allow Modifications 右邊的選項。
4。 點擊 擦拭 在選項 球隊獲勝回收項目 屏幕上。
5。 點擊 高級擦除 選項。
6。 選擇 數據 在選項 Select Partition to Wipe 部分並點擊 Repair or Change File System 選項。
7。 點擊 Change File System 按鈕。
8。 點擊 exFAT的 option and swipe the triple arrow icon or the Swipe to Change option to the right on the screen.
If TWRP mount internal storage issue is still not resolved, you can follow the steps below to repair further files (Optional).
9. 返回 Repair or Change File System 屏幕並點擊 Change File System 選項。
10。 選擇 分機 2 option in the menu and swipe the triple arrow icon or the Swipe to Change option to the right to confirm the selection.
11. Return to the menu, select the 分機 4 option, and swipe the triple arrow icon or the Swipe to Change option to the right to confirm the selection.
12. 返回 球隊獲勝回收項目 屏幕並點擊 山氣 選項。
13。 選擇 數據 和 Micro SD卡 中的選項 Select Partition to Mount section and flash the files.
Method 6: Use ADB Command
The final resort to fix unable to mount storage TWRP issue is to use the ADB or Android Debug Bridge commands on your Windows PC.
Option I: Use Fastboot Command
The first option to fix TWRP internal storage 0mb issue is to use the fastboot command and format data on your phone.
Step I: Enable ADB devices on your PC
As a first step, you have to enable the ADB devices on your Windows PC using the official ADB tool.
1.使用 USB電纜, connect your phone to your Windows PC.
2.點擊 Windows鍵,輸入 谷歌瀏覽器,然後點擊 已提交.
3。 打開 Android SDK平台工具 網站並點擊 Download SDK Platform- Tools for Windows 在鏈接 下載 部分。
4. Using a data compression utility like WinZip的, extract all the files of the ADB tool to the 本地磁盤(C :) 開車。
5。 按 Windows鍵,輸入 Windows PowerShell中,然後點擊 以管理員身份運行.
6. 鍵入 ./adb設備 命令並按 回車鍵 to check the connected devices.
7。 點擊 接受 手機上的選項。
相關閱讀: 修復 Android 上的系統 UI 已停止黑屏
Step II: Enable USB Debugging
To enable the USB debugging option, you have to enable the Developer mode on your phone as follows.
1. From the home menu, open the 設定 應用程序。
2. Tap on the tab 關於手機.
3. Tap on the tab 軟件信息.
4. Tap on the tab 內部版本號 7 收到心意卡的你,代表同樣的產品正送往前線醫護的手中。
5. The message Developer mode has been enabled 將顯示。
6. 返回 設定 main page and tap on the tab 開發者選項.
7。 在裡面 調試 section, toggle on the USB調試 選項。
8。 在裡面 允許USB調試? confirmation message, tap on the OK 選項。
相關閱讀: What is Odin Mode on Samsung Phone?
Step III: Enable Node Tree Debugging
To enable the Windows PC to make changes to the Android phone, you have to enable the additional feature called Node Tree Debugging as follows.
1. 返回 設定 main page and tap on the tab 無障礙服務.
2。 點擊 對講 選項。
3. 然後,點擊 設定 選項。
4. 接下來,點擊 高級設置 選項。
5。 點擊 開發人員設定 選項。
6. 打開 Enable node tree debugging 選項。
7。 在裡面 Enable Node Tree Debugging? confirmation window, tap on the OK 選項。
Step IV: Format Data Using Windows PowerShell
The last step to fix the unable to mount storage TWRP issue is to format the data on your phone using the Windows PowerShell app.
1.點擊 Windows鍵,輸入 Windows PowerShell中,然後點擊 以管理員身份運行.
2. Type the given 命令 並按下 回車鍵 to reboot your phone into TWRP 模式。
adb reboot bootloader
3. Then, type the following 命令 並擊中了 回車鍵 to format the user data on your phone.
fastboot format userdata
4. 鍵入 fastboot重啟 命令並按 回車鍵 to reboot your phone in Fastboot mode.
相關閱讀: 如何在 Android 上取消隱藏應用程序
Option II: Flash Recovery File
The second option to fix the issue is to flash the recovery file to your ADB folder on your Windows PC.
Step I: Rename Recovery File in adb Folder
As a first step, you have to rename the recovery file on the adb folder on your Windows PC to fix compatibility issues.
1. Enable ADB devices using your Windows PC.
2。 啟用 USB調試 和 Node Tree Debugging options on your phone.
3。 打開 檔案總管 使用 的Windows + E 鍵 simultaneously and navigate to the 亞行 folder using the location path as This PC > Local Disk (C:) > adb.
4. Right-click on the TWRP file and click on the 重命名 選項。
5。 類型 recovery.img 並按下 回車鍵.
注意: You have to copy the name of the recovery file on your phone and rename the file accordingly.
Step II: Flash Recovery File
The next step is to flash the recovery file on your phone using the Windows PowerShell app.
1。 按 Shift鍵, right-click on a space, and click on the Open Windows PowerShell window here 選項。
2. 輸入命令 FASTBOOT設備 並擊中了 回車鍵 to check for adb devices in the fastboot mode.
3. 輸入命令 fastboot recovery.img 並按下 Enter key to flash the recovery file on the fastboot mode on your phone.
推薦:
The methods to fix the issue of being unable to mount storage TWRP are discussed in the article. Please let us know your suggestions and queries on the topic in the comments below for us to heed your doubts.